- Part Number: K-150WSB
- Packaging Weight: 27.81 kg
Amp Kit Bass 150 WSB Plexi Style with 2 chanels and ca. 150 watt power. This Amp is a... more
Product information "Amp-Kit Plexi 150W Bass Guitar"
Amp Kit Bass 150 WSB Plexi Style with 2 chanels and ca. 150 watt power.
This Amp is a mix of the legends of the late 1960s and 1970s. The output transformer has been modelled after the 200W Hiwatt type, the chassis and head design is an hommage to the Plexi-Marshall Amps.
The quartet of the KT88 and the oversized output transformer allow for an airy top end and deep growling bass.
Update from 23.7.2021:
From now on, as an upgrade, all TAD Amp Kits come with the TAD Custom Dimple Potentiometers - made by CTS
Power: ca. 100 Watt
Impedance: 4,8,16 Ohm
Tubes: 1x ECC83 WA, 2x 12AT7 / ECC81, 1x KT88 quartet
Available variants:
K-150WSB-NC
The pure kit without cabinet:
Measure: 6,4cm height x 64,2cm width x 17,2cm depth
Total weight: ca. 15 kg
K-150WSB
Kit incl. head cabinet coverd with black tolex.
Cabinet: K-C100WH
Measure: 27,5cm height x 74cm width x 22cm depth
Total weight: ca. 18 kg
K-150WSB-GB
Kit incl. head cabinet coverd with black on green tolex.
Cabinet: K-C100WH-GB
Measure: 27,5cm height x 74cm width x 22cm depth
Total weight: ca. 18 kg
K-150WSB-PL
Kit incl. head cabinet coverd with purple levant tolex.
Cabinet: K-C100WH-PL
Measure: 27,5cm height x 74cm width x 22cm depth
Total weight: ca. 18 kg
K-150WSB-RE
Kit incl. head cabinet coverd with red elephant tolex.
Cabinet: K-C100WH-RE
Measure: 27,5cm height x 74cm width x 22cm depth
Total weight: ca. 18 kg
K-150WSB-RL
Kit incl. head cabinet coverd with red levant tolex.
Cabinet: K-C100WH-RL
Measure: 27,5cm height x 74cm width x 22cm depth
Total weight: ca. 18 kg
K-150WSB-W
Kit incl. head cabinet coverd with white levant tolex.
Cabinet: K-C100WH-W
Measure: 27,5cm height x 74cm width x 22cm depth
Total weight: ca. 18 kg
All inclusive:
TAD Premium Selected Tubes:
1x #RT008 ECC83 WA, 2x #RT002 12AT7, 1x #RT894 KT88 quartet,
plexi-panel-set, eyeletboards, ceramic sockets, mounting materials, full size pots, knobs, Orange Drop caps,
carbon composition resistors, cloth-covered wire, chrome chassis, transformers etc.
This amp kit can be operated with mains voltages of 110/120 volts and 220/230 volts.
However, both the plug type used and the technical design are preconfigured to the European standard.
Please inform us at the end of the ordering process if you plan on operating the amp at 110/120 volts.
In this case, for example, other fuses and a different power plug must be included.
WARNING:
Please note that the Amp-Kit are not a beginners project but for experienced amp builders!
Voltages inside tube amplifiers can exceed 500V and can cause serious damage and can even kill!
Ampkit Style: | Plexi Style |
Ampkit Power: | 150 Watt |
Reviews
1
Read, write and discuss reviews... more
Customer evaluation for "Amp-Kit Plexi 150W Bass Guitar"
From:
Jaakko Turunen
On:
8 Jan 2012
I built this kit for my customer 2 years ago. Both me and my customer found that it was one of the the best bass tube amps we had ever heard! We were the most satisfied with this kit!
Jaakko Turunen, tube amplifier service technician, Kuopio Finland
Write an evaluation
Please verify your testimonial by clicking on the link sent to your email after submitting your text.
Hint!
Viewed