window.ga=window.ga||function(){(ga.q=ga.q||[]).push(arguments)};ga.l=+new Date; ga('create', 'UA-177780411-1', 'auto'); ga('set', 'forceSSL', true); ga('set', 'anonymizeIp', true); ga('require', 'displayfeatures'); ga('require', 'cleanUrlTracker'); ga('require', 'outboundLinkTracker'); ga('require', 'ec'); ga('send', 'pageview'); ga('set', 'nonInteraction', true); setTimeout("ga('send', 'event', 'read', '20 seconds')", 20000); Buy guitar switches, boards, potentiometers | Tube Amp Doctor

Switches / Boards / Potentiometer

Close filters
  •  
  •  
  •  
  •  
  •  
  •  
 
from to

Cable

  •  
  •  

Potentiometer

  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  

Switches

  •  
  •  
1 From 3
No results were found for the filter!
TAIWAN ALPHA ELECTRONIC CO.,LTD.
Z-LP500K-PP 500k PUSH-PULL Gitarrenpotentiometer Audio/Log, langes Gewinde, Riffelachse
500K Push/Pull DPDT Audio Pot, knurled shaft, 3/4" long threaded...
PUSH-PULL Guitar-pot, Split Shaft, 500K Audio Potentiometer 500K audio taper control pot with double pole/double throw (DPDT) push pull switch. Super quality, feel and reliability. 19mm Long shaft bushing for use in Les Pauls and other...

€12.90 *
Remember Part Number: Z-LP500K-PP
CTS Corporation
CTS-D-A250K CTS 250k LOG Custom Dimple Potentiometer, glatte 6.3mm Achse, 24mm
A250K LOG CTS Dimple Potentiometer
CTS 250k Ohm true vintage Dimple Back Audio Taper (Log) 24mm Potentiometer

€6.95 *
Remember Part Number: CTS-D-A250K
Tube Amp Doctor GmbH
SW4003 CRL 3-Weg Pickup Wahlschalter
CRL 3-Way Lever Switch
CRL 3-Way Lever Switch, original USA Supplied without screws and knob. Matching products, see accessories

€29.00 *
Remember Part Number: SW4003
Tube Amp Doctor GmbH
SW4001 CRL 5-Weg Schalter
CRL 5-Way Lever Switch
CRL 5-Way Lever Switch, original USA Supplied without screws and knob. Matching products, see accessories.

€27.00 *
Remember Part Number: SW4001
CTS Corporation
CTS-D-A250K-S CTS  250K Dimple Vintage Audio Taper (LOG) Gitarrenpotentiometer, glatte Achse, kurzes Gewinde
CTS 250k Dimple Vintage Audio Taper (LOG) Guitar Potentiometer,...
CTS 250k Ohm true Vintage Audio Taper (30% Log) 24mm Dimple Back Guitar-Potentiometer SOLID shaft, short 6.4mm bushing original Specs for Vintage Telecaster® Guitars

€9.35 *
Remember Part Number: CTS-D-A250K-S
CTS Corporation
CTS-D-A250K-SK CTS  250K Dimple Vintage Audio Taper (LOG) Gitarrenpotentiometer, Riffel-Achse
CTS 250K Dimple Vintage Audio Taper (LOG) Guitar Potentiometer,...
CTS 250k Ohm true Vintage Audio Taper (30% Log) 24mm Dimple Back Guitar-Potentiometer split/knurled shaft, short 6.4mm bushing original Specs for Vintage Stratocaster® Guitars

€9.35 *
Remember Part Number: CTS-D-A250K-SK
CTS Corporation
CTS-D-A250K-NL CTS 250K NO LOAD Dimple Vintage Audio Taper (LOG) Gitarrenpotentiometer, Riffelachse
CTS 250K NO LOAD Dimple Vintage Audio Taper (LOG) Guitar...
CTS 250k Ohm NO-LOAD true Vintage Audio Taper (30% Log) 24mm Dimple Back Guitar-Potentiometer NO-LOAD: allows more overtone harmonics! Much like the Fender "No Load" pot this No-Load pot acts as a true bypass when rotated between 9 and...

€9.35 *
Remember Part Number: CTS-D-A250K-NL
CTS Corporation
CTS-D-B500K-MK CTS  500K LIN Custom Dimple Back Potentiometer, Riffelachse
CTS 500K LIN Custom Dimple Back Potentiometer, medium Shaft
CTS 500k Ohm LIN, 24mm Dimple Back Guitar-Potentiometer split/knurled shaft, 3/8"thread, knurled 24 teeth Linear version : especially nuanced control behavior for clean and slightly crunched sounds

€9.35 *
Remember Part Number: CTS-D-B500K-MK
CTS Corporation
CTS-D-A500K-LK CTS  500K Dimple Vintage Audio Taper (LOG) Gitarrenpotentiometer, Langschaft
CTS 500K Vintage Audio Dimple Potentiometer, Long Shaft
CTS 500k Ohm true Vintage Audio Taper (30% Log) 24mm Dimple Back Guitar-Potentiometer split/knurled shaft, long 19mm bushing original Specs for Vintage Gibson Les Paul® guitars (check for actual bushing length required)

€9.90 *
Remember Part Number: CTS-D-A500K-LK
CTS Corporation
CTS-D-A500K-MK CTS  500K Dimple Vintage Audio Taper (LOG) Gitarrenpotentiometer, Riffelachse
CTS 500K Vintage Audio Dimple Potentiometer, medium Shaft
CTS 500k Ohm true Vintage Audio Taper (30% Log) 24mm Dimple Back Guitar-Potentiometer split/knurled shaft, medium 9.5mm bushing original Specs for Gibson Les Paul® or PRS guitars (check for actual bushing length required)

€9.35 *
Remember Part Number: CTS-D-A500K-MK
CTS Corporation
CTS-PL-250KA-KN CTS 250K DPDT Push-Pull Potentiometer
CTS 250K DPDT Push-Pull Potentiometer
The best push-pull potentiometer ever made! These aren't your standard off the shelf CTS pots either. -Custom taper for a smoother volume or tone control -10% tolerance -Solid brass split shaft and bushing (3/8'' diameter x 3/8'' length)...

€11.90 *
Remember Part Number: CTS-PL-250KA-KN
CTS Corporation
CTS-PL-500KA-KN CTS 500K DPDT Push-Pull Potentiometer
CTS 500K DPDT Push-Pull Potentiometer
The best push-pull potentiometer ever made! These aren't your standard off the shelf CTS pots either. -Custom taper for a smoother volume or tone control -10% tolerance. -Solid brass split shaft and bushing (3/8'' diameter x 3/8''...

€11.90 *
Remember Part Number: CTS-PL-500KA-KN
CTS Corporation
Z-LP500K Gitarrenpotentiometer, Riffelachse, 500K Audio, CTS, Langschaft
CTS 500K Split Shaft Audio Potentiometer, Long Shaft
Pot for Guitar,500K-A, Split Shaft, Long Shaft, used by Gibson for Les Paul guitars as Volume/Tone, CTS discontinued item; available as long as stock lasts CTS successor item see p/n: CTS-D-A500k-LK

€12.90 *
Remember Part Number: Z-LP500K
CTS Corporation
CTS-PL-500KA-LK CTS Long Shaft 500K DPDT Push-Pull Potentiometer
CTS Long Shaft 500K DPDT Push-Pull Potentiometer
The best push-pull potentiometer ever made! These aren't your standard off the shelf CTS pots either. -Custom taper for a smoother volume or tone control -10% tolerance. -Correct size with solid brass split shaft and long bushing for...

€11.90 *
Remember Part Number: CTS-PL-500KA-LK
Switchcraft, Inc.
HR4007 Deep Thread Round Nut for Switchcraft 3-Way Toggle switch, GOLD
Deep Thread Round Nut for Switchcraft 3-Way Toggle switch, GOLD
gold plated knurled locknut with shoulder. Deep Thread Round Nut for Switchcraft 3-Way Toggle switch, gold plated Used on certain models of Gibson® guitars with gold hardware and other brands where the threading of the switch isn't able...

€4.49 *
Remember Part Number: HR4007
Switchcraft, Inc.
HR4000 Tiefgewinde-Rundmutter für Switchcraft 3-Way Toggle-Schalter, nickel
Deep Thread Round Nut for Switchcraft 3-Way Toggle switch, nickel
knurled locknut with shoulder. Deep Thread Round Nut for Switchcraft 3-Way Toggle switch, nickel Used on various models of Gibson® guitars and other brands where the threading of the switch isn't able to project from the body enough....

€4.49 *
Remember Part Number: HR4000
Tube Amp Doctor GmbH
EFX-KIT-SC Effects Loop Kit, active,Semiconductor
DISCRETE HI-VOLTAGE SERIES EFFECTS LOOP FOR TUBE AMPS
Offers a low noise non clipping high voltage discrete buffer and return gain stage optimized for insertion between your preamp and driver stages. Installation requires 4 wires, power ground input and output. The stock setup offers a send...

€86.00 *
Remember Part Number: EFX-KIT-SC
Fender Musical Instruments Corporation Inc.
099-2035-000 Fender® Strat Knob Set, white
Fender® Strat Knob Set, white
Includes: Volume (1) & tone knobs (2)

€14.20 *
Remember Part Number: 099-2035-000
Fender Musical Instruments Corporation Inc.
099-1369-000 Fender® Strat Knob Set, aged white
Fender® Strat Knob Set, aged white
Includes: Volume (1) & tone knobs (2)

€14.80 *
Remember Part Number: 099-1369-000
Fender Musical Instruments Corporation Inc.
099-1365-000 Fender® Strat Knob Set, black
Fender® Strat Knob Set, black
Includes: Volume (1) & tone knobs (2)

€14.20 *
Remember Part Number: 099-1365-000
Fender Musical Instruments Corporation Inc.
005-6254-049 Fender® Strat Knob Set, parchment
Fender® Strat Knob Set, parchment
Includes: Volume (1) & tone knobs (2)

€13.70 *
Remember Part Number: 005-6254-049
TAIWAN ALPHA ELECTRONIC CO.,LTD.
Z-A500K-KN Gitarren-Potentiometer 500k Audio, 6mm/24er Riffelachse + Split-Schaft
Guitar-Pot 500k Audio, 6mm/24 teeth knurled/Split-Shaft
Guitare-Potentiometer TAD/Alpha, 1piece 500k Audio / log, 6mm/24 teeth knurled/Split-Shaft with tinned back for traditionall solder style TAD/Alpha pots are custom made to accomplish perfect Volume/Tone control on vintage guitars: - 24...

From €4.09 *
Remember Part Number: Z-A500K-KN
TAIWAN ALPHA ELECTRONIC CO.,LTD.
Z-A250K-KN Gitarrenpotentiometer, 250K Audio,  Riffelachse 6mm/24er Riffelachse + Split-Schaft
Guitar-Pot, 250K Audio / log, 6mm/24 teeth knurled/Split-Shaft
Guitare-Potentiometer TAD/Alpha, 1piece 250k Audio / log, 6mm/24 teeth knurled/Split-Shaft TAD/Alpha pots are custom made to accomplish perfect Volume/Tone control on vintage guitars: - 24 teeth knurled split-shaft 6mm diameter; fits...

€4.95 *
Remember Part Number: Z-A250K-KN
CTS Corporation
Z-A250K-BSK Gitarrenpotentiometer mit kurzer Messing Riffelachse, Lötösen (CTS), 250K Audio
Guitar-pot, brass Split Shaft, 250K Audio Potentiometer, CTS
Pot for Guitar,250K-A (Audio), 1 pc., short brass split shaft. the original CTS. comes with nut, lock washer and washer like pictured special item!

€6.90 *
Remember Part Number: Z-A250K-BSK
1 From 3

Switches, Boards, and Potentiometers – Controlling and Governing

Not only do our beloved tube amplifiers require switches, boards, and potentiometers to indulge us with the sweet sound of fat riffs, but guitars and basses also need the appropriate replacement parts to do their job. Therefore, we have expanded our stock of replacement parts to include potentiometers and more, offering our customers a selection of high-quality parts. When it comes to our guitar components, we rely on excellent quality from renowned manufacturers such as CTS, Switchcraft, or Mojotone.

Switches

In addition to various micro and mini switches, the pickup selector switches, in particular, dominate the body of modern electric guitars. While the basic function of the pickups does not differ significantly from manufacturer to manufacturer, the switching and selection combinations are hardly limited.

Therefore, we offer a wide selection of freely assignable switches, from the classic toggle switch with three switch positions mainly used by Gibson, to 4-way switches, to the Fender-style 5-way selector switch.

High-quality parts from Switchcraft or from our own TAD line are available to our customers.

We also offer the appropriate knobs for potentiometers and switch tips for guitars.

Potentiometers

Potentiometers control the sound of the guitar internally. In addition to adjusting the output signal via one or more volume potis, most models have one or more tone potentiometers that control the respective sound of the pickups.

The first sign of a faulty or defective potentiometer is an audible scratching when the sound is changed. Later, the potis may completely fail and no longer allow any change in the audio.

To achieve clean and, above all, noise-free control of the tone, high-quality and continuously operating potentiometers should be used as much as possible. We rely on potentiometers from Alpha, CTS, and our own TAD series - ensuring clean processing and silent operation of the potentiometer.

Capacitors

Depending on the manufacturer of the internal electronics, capacitors are more or less used to influence special tone characteristics of the respective instrument. Rich midrange, singing highs, and fat bass can be further enhanced and polished through the use of high-quality capacitors. We stock a large number of capacitors - whether it's Jimmy Page wiring or 50s style wiring - this is where it gets down to the nitty-gritty.

Don't lose sight of the instrument's inner values - Tube Amp Doctor

Since 1993, we have been dedicated to acoustics. With our service around tube amps, speakers, and more, we provide our customers with a huge range of components to perfect the sound output in their lineup. What could be more natural than also taking care of the "sound producer"? Thanks to our long experience and our passion for good accoustics, we also support our customers with replacement parts for guitar and bass, advise them, and provide ideas for their own sound. Fair prices, huge selection, high-quality products, and always an open ear for customers - that's Tube Amp Doctor.

Viewed