No results were found for the filter!
100+100uF 500V electrolytic capacitor, radial 35x80mm
TAD - Gold Cap elektrolytic capacitor 100+100uF 500V, 85°C size: 35x80mm cap can for standard clamp mounting (d= 35mm) LCR style construction with same colour marked solder terminals. Great replacement for many european amplifiers like...
Remember
Part Number: V-100100500R
100uF @ 500V 26x52mm axial capacitor
TAD Gold Cap, axial, electrolytic capacitor, 105°C
Remember
Part Number: V-100500
10uF @ 450V 12x30mm axial electrolytic capacitor
axial electrolytic capacitor 10uF @ 450V 12x30mm can replace Sprague TVA 1406 can be replacemend directly with vintage correct spec type: V-8475
Remember
Part Number: V-10450
12AT7 / ECC81 TAD Premium Selected (balanced)
Rich-sounding Reverb Driver - Also Great for HiFi Audio-Systems and Studio Compressors! Low noise tube, selected for best symmetry and balance. A strong driver tube and a wounderfully rich-sounding reverb driver. Also used in the great...
Remember
Part Number: RT002
12AT7WC-USA NOS TAD Premium Selected (balanced)
The Original US-made mil. Grade JAN Version in TAD Premium NOS-Selection quality This tube is used in old Fender amps or hi-fi applications and produces a smooth reverb. It replaces the 6201, E81CC and ECC801. upgrades ECC81 and 12AT7....
Remember
Part Number: RT004
12AU7A / ECC82 TAD Premium Selected (balanced)
The Perfect Choice for Stereo Audio Applications - Ideal as a Balanced Driver This TAD 12AU7A / ECC82 has especially strong systems which are selected to provide two symmetrically amplifying triodes - also called "balanced". The perfect...
Remember
Part Number: RT005
12AU7WA / E82CC TAD Premium Selected (balanced)
Very quiet but powerful. This great symmetrical and balanced tube is your perfect choice for demanding Hi-Fi amps, and works perfectly as a pushing driver stage in instrument amplifications, also. Somewhat more stringent and defined with...
Remember
Part Number: RT065
12AX7A-C TAD, BALANCED PHASE DRIVER Selection
Perfectly BALANCED PHASE DRIVER Tube !! A perfectly balanced 12AX7 will allow the tube output stage to perform at its optimum for smooth tone and definition. The overall responsiveness will be significantly improved by revealing the full...
Remember
Part Number: RT001-BPD
12AX7A-C / ECC83 TAD Premium Selected
Perfect V2+ Preamp Tube - Good Gain - Tight Deep Bass - Fat Mid-range!! The TAD 12AX7A-C / ECC83 TAD Premium Selected provides very good gain, tight deep bass, fat mids and silky top end with overall definition and brightness. Selected...
Remember
Part Number: RT001
12AX7WA-R TAD Premium Selected
Maintain Your Amp's Original Tone! Very low noise but slightly less gain than a regular 12AX7. Soft highs and edgy, dominant high-mids. Our recommendation when your amp has microphonic issues. This tube is used in many Fender amps made...
Remember
Part Number: RT006
12AY7/6072A HIGHGRADE TAD Premium Selected
Tweed Up Your Amp! Vintage tone for original vintage Fender tweed amps. The original tube for all those Fender® tweed amps from the 50s. Brings back the original sound to your tweed amp. The 6072a is also used in high quality tube...
Remember
Part Number: RT070
12AY7/6072A TAD Premium Selected
Tweed Up Your Amp! Vintage tone for original vintage Fender tweed amps. The original tube for all those Fender® tweed amps from the 50s. Brings back the original sound to your tweed amp.
Remember
Part Number: RT007
12BH7A REDBASE TAD Premium Selected (balanced)
Maximum of Reliability - Outstanding Tonal Quality! 1st Choice for Ampeq SVTs! The all-new TAD 12BH7A REDBASE combines the best sonic and mechanical performance of the NOS RCA black plate with advantages of the GE version. A maximum of...
Remember
Part Number: RT043
12BH7A TAD Premium Selected (balanced)
The new TAD 12BH7A is an alternative for the TAD 12BH7A-STR in a more compact design (less high) and slightly higher gain. The mechanical built quality is outstanding and grants super low noise performance, ruggedness and long life. The...
Remember
Part Number: RT046
12DW7 / 7247 TAD Premium Selected
Asymmetric double triode as used in old Ampegs. Q: When does a preamp tube become a Premium Selected tube? A: All preamp tubes labeled Premium Selected have passed the following tests: - Low Noise Test - Microphonic Test - Gain Test -...
Remember
Part Number: RT044
16mfd+32mfd 500V electrolytic capacitor, radial 35x50mm
TAD - Gold Cap elektrolytic capacitor 16+32uF 500V, 85°C size: 35x52mm cap can for standard clamp mounting (d= 35mm) LCR style construction with same colour marked solder terminals. Great replacement for many european amplifiers like...
Remember
Part Number: V-1632500R
16uF @ 475V 12x30mm electrolytic capacitor, axial, 105°C
16mfd @ 475 VDC, electrolytic, 105°C rated, 12 x 30mm replaces Sprague TA 1803.1 (which is 85°C only) this capicitor value has been used in many vintage US made amps as well in many boutique amps. You'll find it as stock type in allmost...
Remember
Part Number: V-16475
220uF 350V 35x60mm cap can, clamp mount
TAD - Gold Cap elektrolytic capacitor 220uF 350V, 85°C size: 35x60mm for standard clamp mounting (d= 35mm) LCR style construction with solder terminals. Great replacement for many european amplifiers like Hiwatt (Mod DR103 etc.) , Orange...
Remember
Part Number: V-220350R
22uF @ 500V 16x32mm axial capacitor 105°C
axial capacitor, 22uF @ 500V, 105°C, 16x32mm perfect replacement for many Fender Amps (replaces 20uF/ 500V)
Remember
Part Number: V-22500
250uF @ 25V 16x27mm BIPOLAR axial capacitor, 105°
Perfect for VOX AC30, Cathode Bypass Cap of the EL84. Improved overtones and definition. 105°C
Remember
Part Number: V-25025BP
25uF @ 25V 10x19mm BIPOLAR axial capacitor
25uF @ 25V 10x19mm BIPOLAR axial capacitor Especially for Cathode Bypass Caps in Fender Amps for improved overtones and sonic performance!
Remember
Part Number: V-2525BP
25uF @ 25V axial capacitor, 105°C, 13mm x 6.5mm
Replacement + recommended Upgrade: V-2525BP
Remember
Part Number: V-2525
2x30uF@25V+ 50uF@300V+ 10uF@350V solder or clamp mount
Multi-section twist lock capacitor, four sections - 50uF @ 300 VDC, 30uF @ 25 VDC, 30uF @ 25 VDC and 10uF @ 350 VDC. CE Manufacturing USA Made Multi Section Can Capacitor, Hammond AO-28 Preamp for B3, C3, A100, RT3, D100 Organs....
Remember
Part Number: V-50303010R
32+32uF 500V electrolytic capacitor, radial 35x50mm
TAD - Gold Cap elektrolytic capacitor 32+32uF 500V, 85°C size: 35x50mm cap can for standard clamp mounting (d= 35mm) LCR style construction with same colour marked solder terminals. Great replacement for many european amplifiers like...
Remember
Part Number: V-3232500R
Top seller
Viewed






