Hardware / Screws
No results were found for the filter!
package of 4 wheels including mounting sockets and screw primary used by Fender® since 1960s till today heavy duty ball-bearing swivel amplifier casters keep you rolling in style. Don't break your back; give it a break with "Pop-in/out"...
Part Number: FACA4
black plastic amp corner like used with the VOX AC30® and many more VOX® and Orange® amplifier models since the 1960's till today.
Part Number: HR2050
1 piece Amp Corner, for 2 screws with lip, nickel/chrome finish screws NOT included (see below) we recommend to use the matching screws: HR3040 screws primary used by Fender® since 1960s
Part Number: FAC
Black 3-Leg Corners, Steel, No Lip / Set of 4 (with Screws) Weight: .25 lb
Part Number: FACU-MB4
Cage-nut for for TAD Aluminum Chassis z.B. K-ACM100WNH or Marshall© Chassis used in JMP, JCM800, JCM900 and others, M6/SQ9,5 one piece matching screw find here: HR9291
Part Number: HR9290
primary used by Fender® from 1960s to ca. 1975 and on all Fender Blackface Reissue models. matching hex-nut: HR3121 ca. ´75 on Fender used a shorter screw: see HR3050
Part Number: FCSC
Chassis Strap (3''), monting center = 7,5 cm, nickle/chrome finish 1 piece used by Fender Champ®, Vibro Champ® etc. since 1964 matching screws/bolts and nuts available here: FSCS + HR3121
Part Number: FCS3
Chassis Strap (4''), monting center = 10,16 cm, nickle/chrome finish 1 piece used by Fender Deluxe® Reverb, Princeton® Reverb, Princeton® Amp etc. since 1960s matching screws/bolts and nuts available here: FSCS + HR3121
Part Number: FCS4
Chassis Strap (5''), monting center = 12,7 cm, nickle/chrome finish 1 piece used by Fender Twin®, Super® Reverb, Showmann, Pro Reverb etc. since 1960 matching screws/bolts and nuts available here: FCSC + HR3121
Part Number: FCS5
Fender Style Cap Can Cover size: l=14.5cm primary used by Fender® Deluxe Reverb Amps and still today in the reissue of the Fender '65 Deluxe Reverb Amp. Dimensions: Outside: W x D x H: 159mm x 91mm x 35mm Inside: W x D x H: 129mm x 87mm...
Part Number: FCCS
Deep Thread Round Nut for Switchcraft 3-Way Toggle switch, nickel
Part Number: HR4000
Amp Corner, for 2 screws with lip, nickel/chrome finish package of 4, includes HR3040 screws primary used by Fender® since 1960s
Part Number: FAC4
Zinc plated oval head wood screw. Perfect for mounting Blackface and Silverface Fender style floating baffles. primary used by Fender® 1950 till today total length: 1 1/2" diameter: 0.164" head diameter: 0,312" thread: #8
Part Number: HR3051
Fender, Schraube for FLFL- Logo, SMA 2x3/8 PHP, black 1 screw
Part Number: FLSCREW
Fender Style Cap Can Cover size: l=18cm primary used by Fender® Twin (-1974)/ Super / Pro Reverb Amps and still today in the reissue of the '65 Twin or Super Reverb Amp. Dimensions: Outside: W x D x H: 193mm x 102mm x 35mm Inside: W x D...
Part Number: FCCM
Fender® Piggy Back Under Head Clamps, 2pcs Used by Fender® in early 60s for Bandmaster-, Bassman-, Showman- and Tremolux-Heads "Piggy-Back" to mount them on the external cabinets to allow to tilt them a complete set. Includes all...
Part Number: FUHC2
Piggyback Thumb Screws "Hold Down knobs" genuine Fender® since early 1960's package content: 2 pieces
Part Number: FHDK2
Fender® Tilt Back Legs 14'' This is the size as used for the Fender Tremlux 2x10" cabinet. Used by Fender® since the 1960s for the smaller amps and cabs. If you like to mount these Tilt Legs on different amps or cabinets the note: a...
Part Number: FTB14
Fender® Tilt Back Legs 16'' with mounting hardware. This is the size as used for the Fender Twin Reverb. Used by Fender® since the 1960s for the classic models Twin Reverb, Vibrosonic Reverb, Pro Reverb, Bandmaster and Bassman and...
Part Number: FTB16
Fender® Tilt Back Legs 19'' (~48.3cm) with mounting hardware. This is the size as used for the Fender Super Reverb Amp. Used by Fender® since the 1960s for the classic models Super Reverb, Concert (4x10), Vibro-King and all models with...
Part Number: FTB19
12pcs/1dz. finishing "Tea Cup" washers, german silver!, (set = 12 pieces) for early 60s vintage Fender amp back-panel screws typically used with blonde and brown tolex Fender amps 1960-1964 and the early black Tolex Fender amps and...
Part Number: HR3024