No results were found for the filter!

FANE T-Shirt standard logo, black Print: standard logo, screenprint
Remember
Part Number: FANE-SHIRT-LOGO-L

Fender® Logo, chrome script, no tail, 1970s as used in the silverface years around mid to end 1970s and on black tolex covered guitar cases
Remember
Part Number: FL70

Fender® script logo with tail The Fender blackface logo as used since 1963 till 1974 also on earlier silverface amps and some re-issue and retro models. Also used on vintage style black Fender guitar cases.
Remember
Part Number: FL

Fender Flat Logo originally used in years 1960 bis 1963 for amps with cream- or brown-tolex covering as Fender Princeton, Tremolux, Deluxe, Super, Vibrolux, Vibroverb, Pro, Concert, Bandmaster, Bassman,Twin, Showman and the Reverb Unit...
Remember
Part Number: FLFL

Fender Flat Logo, BLACK tail originally used in years 1960 bis 1963 for amps with cream- or brown-tolex covering as Fender Princeton, Tremolux, Deluxe, Super, Vibrolux, Vibroverb, Pro, Concert, Bandmaster, Bassman,Twin, Showman and the...
Remember
Part Number: FLFL-BL

Fender® Logo, NOS unusaed original spare part from the 1970s with "made in USA" as used in the silverface years around mid to end 1970s and on black tolex covered guitar cases only a few pieces. When gone then gone forever...
Remember
Part Number: FL-USA

script version for Tweed Amps
Remember
Part Number: FLSTW

TAD - Gift - Voucher The TAD-Gift-Voucher is a welcome present for musicians and other tube friends. It is valid for the purchase of goods as well as for professional service works, amp restoration, modifications, sound research etc. by...
Remember
Part Number: GUTSCHEIN

The new standard in harp microphones is the Hohner HB52 Harp Blaster Bullet Microphone Modeled after the sound of legendary vintage harp microphones and with the help of professional players, HOHNER and sE Electronics have created the...
Remember
Part Number: H-HB52

Marshall® Logo, "100", JTM45-100 Stack, formely used on High Power cabinets equipped with Celestion G12H Speakers distance between the pins is 25mm
Remember
Part Number: ML100

Distance between the two outermost pinc ca. 12cm fits 1x12" combos and 18 watt small box headshell
Remember
Part Number: MLS

Distance between the two outermost pinc ca. 12cm
Remember
Part Number: MLSG

Distance between the two outermost pinc ca. 20cm
Remember
Part Number: MLM

original Marshall® Logo, used for JCM 800, JCM 900, JCM 2000 Series (amp head, 4x12" cabinets, combo amps etc.) since 1980s plastic, 27 cm long, white Distance between the two outermost pinc ca. 22cm
Remember
Part Number: MLG

Switchcraft #332AX Old Style MC1M Microphone Connector To 1/4" 2 Conductor Phone Jack used to connect old style microphones like Astatic JT30, Turner, Shure, RCA with standard guitar cord. typically used with high-Z bullet microphones by...
Remember
Part Number: SC-332AX

female, 5/8-27, remove the lock-ring to convert this connector to male used on many old US "Harp" microphones like the vintage ASTATIC JT30
Remember
Part Number: CO250IF

used on many old US "Harp" microphones like the vintage ASTATIC JT30 male, 5/8-27 thread, 2 pole mounts 10mm / 0.390" hole
Remember
Part Number: CO2501MP

Amp Kit Brownface 20, 6G3 Style with ca. 20 watt power. amp is delivered ready-to-rock! This Amp Kit is based on the legendary Fender Brownface Deluxe® Amp of the early 1960's. Modelled after the original! Authentically built but with a...
Remember
Part Number: A196

TAD Blues-Harp Micro-Kabel: Classic Black finished guitar cable wired with XLR connector for use with the new Hohner HB52 Harp Blaster Bullet Mic ! NOTE: does NOT fit Astatic JT30 models (and remakes) and the (old) Hohner Blues Blaster...
Remember
Part Number: CB5079-HB52

TAD Blues-Harp Micro-Kabel: tweed finished guitar cable wired with XLR connector for use with the new Hohner HB52 Harp Blaster Bullet Mic ! NOTE: does NOT fit Astatic JT30 models (and remakes) with XLR jack and the (old) Hohner Blues...
Remember
Part Number: CB5078-HB52

TAD Blues-Harp Micro-Kabel: guitar cable wired with XLR connector for use high-Z Harmonic "blues harp" microphones. These are the legendary Astatic JT30 models (and remakes) with XLR jack and the (old) Hohner Blues Blaster 1492. NOTE:...
Remember
Part Number: CB5079

TAD Blues-Harp Micro-Kabel: tweed finished guitar cable wired with XLR connector for use high-Z Harmonic "blues harp" microphones. These are the legendary Astatic JT30 models (and remakes) with XLR jack and the (old) Hohner Blues Blaster...
Remember
Part Number: CB5078

TAD Hoodie 70% Organic Cotton/Baumwolle, 30% Polyester, Black w/ print, 280gr.
Remember
Part Number: TAD-HOOD-STRIPES-L

10pc Package : TAD Picks, orange, 0.96mm
Remember
Part Number: TAD-PICK10
Top seller
Viewed