window.ga=window.ga||function(){(ga.q=ga.q||[]).push(arguments)};ga.l=+new Date; ga('create', 'UA-177780411-1', 'auto'); ga('set', 'forceSSL', true); ga('set', 'anonymizeIp', true); ga('require', 'displayfeatures'); ga('require', 'cleanUrlTracker'); ga('require', 'outboundLinkTracker'); ga('require', 'ec'); ga('send', 'pageview'); ga('set', 'nonInteraction', true); setTimeout("ga('send', 'event', 'read', '20 seconds')", 20000); Buy Amp-Chassis & Faceplates | Tube Amp Doctor

Amp-Chassis + Faceplates

Close filters
  •  
  •  
  •  
 
from to

Chassis

  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
1 From 2
No results were found for the filter!
Tube Amp Doctor GmbH
K-ACM18W Amp Chassis für 18 Watt Plexi Kit
Amp Chassis for 18 Watt Plexi Kit
Alumium-Chassis for 18 Plexi Amp Kit for use with tubes: 1 x EZ81, 2 x EL 84, 3 x ECC83 NOTE: matching gold PLEXI face and backplate can be ordered at K-ACM18FRP Material: Aluminium, hardened, 2mm / 5/65 drilled/cut-outs for: 6x...

€56.00 *
Remember Part Number: K-ACM18W
Tube Amp Doctor GmbH
K-ACPRV-NH Amp Chassis für Blackface Princeton Rev. Style AA1
Amp Chassis for Blackface Princeton Rev. Style AA1
without any holes height: 4,5 cm width: 46,3 cm depth: 16cm (top) -18cm (bottom) Material: Steel, hot-dip galvanised

€46.01 *
Remember Part Number: K-ACPRV-NH
Tube Amp Doctor GmbH
K-ACPRV Amp Chassis für Blackface Princeton Rev. Style AA1164
Amp Chassis for Blackface Princeton Rev. Style AA1164
height: 4,5 cm width: 46,3 cm depth: 16cm (top) -18cm (bottom) Material: Steel, hot-dip galvanised Current Fender Faceplates of the Reissue Series do not fit on this chassis.

€58.50 *
Remember Part Number: K-ACPRV
Mojotone
K-ACCVC Amp Chassis für Blackface Vibrochamp Amp AA764 Sty
Amp Chassis for Blackface Vibrochamp Amp AA764 Sty
steel chassis for Blackface Vibrochamp Amp AA764 Dimeensions: H: 45mm W: 387mm D: 155mm for 2x Octalsockets (8-Pin), recommended: s8C-1 2x novalsockets (9-Pin), recommended: s9CS front: 5x pots 2x inputs 1x pilot light lamp 1x slide...

€118.41 *
Remember Part Number: K-ACCVC
Tube Amp Doctor GmbH
K-ACM100W Amp Chassis für 100 Watt Plexi Kit
Amp Chassis typical for 100 Watt Plexi Kit
NOTE: matching gold PLEXI face and backplate can be ordered at K-ACM100FRP Material: Aluminium, hardened, 2mm / 5/65", with reinforced corners !!! dimension: H: 64mm W: 642mm (684mm incl. mounting flange) D: 172mm drilled/cut-outs for:...

€91.50 *
Remember Part Number: K-ACM100W
Tube Amp Doctor GmbH
K-ACM100WNH Amp Chassis für 100 Watt Plexi Kit, OHNE BOHRUNGEN
Amp Chassis typical for 100 Watt Plexi Kit, NO HOLES
Alu Chassis, 2mm strength, No Holes Chassis like the PLEXI 100W but plain with no holes drilled. Same size like the JCM800 100W series and also fits nicely in the TAD "large box head" Cabinet for a Marshall 2203 DIY project. Material:...

€64.20 *
Remember Part Number: K-ACM100WNH
Tube Amp Doctor GmbH
K-ACJTM45NH Amp Chassis für 45 und 18Watt Plexi Kit, OHNE BOHRUNGEN
Amp Chassis typical for 45 and 18 Watt Plexi Kit,
Alu Chassis, 2mm strength, No Holes Chassis like the PLEXI JTM45/ 18W but plain with no holes drilled. Same size like the JTM45 series and also fits nicely in the TAD small box head Cabinet for a Marshall 2204 DIY project. Material:...

€43.49 *
Remember Part Number: K-ACJTM45NH
Tube Amp Doctor GmbH
K-ACSRV-NH Amp-Chassis ohne Bohrungen : Blackface Super Reverb Style AB763
Amp-Chassis without holes: Blackface Super Reverb Style AB763
Zinc galvanized steel chassis without holes for DIY built. Chassis dimensions: H: 45mm B: 595mm T: 215mm Material: Steel, hot-dip galvanised

€54.89 *
Remember Part Number: K-ACSRV-NH
Tube Amp Doctor GmbH
K-ACBRDLX Amp-Chassis:  Brownface Deluxe 6G3 Style
Amp-Chassis: Brownface Deluxe 6G3 Style
with all holes and cuts. The rearplate and the faceplate are not included. The matching faceplates: K-ACBRDLX-FP + K-ACBRDLX-RP Chassis dimensions: H: 45mm W: 483mm D: 179mm Material: Steel, hot-dip galvanised

€46.01 *
Remember Part Number: K-ACBRDLX
Tube Amp Doctor GmbH
K-ACSRV Amp-Chassis: Blackface Super Reverb Style AB763
Amp-Chassis: Blackface Super Reverb Style AB763
Zinc galvanized steel chassis with all holes and cuts for use as spare or to DIY built a Super Reverb or a blackface Vibroverb amp. We recommend to order the cap-can-cover (p/n: FCCM ) along with this chassis. Chassis dimensions: H: 45mm...

€78.40 *
Remember Part Number: K-ACSRV
Tube Amp Doctor GmbH
K-ACTR Amp-Chassis: Blackface Twin Reverb Style AB763
Amp-Chassis: Blackface Twin Reverb Style AB763
Zinc galvanized steel chassis with all holes and cuts for use as spare or to DIY built a Twin Reverb or a Showman Reverb amp. We recommend to order the cap-can-cover (p/n: FCCM ) along with this chassis. Chassis dimensions: H: 45mm B:...

€99.00 *
Remember Part Number: K-ACTR
Tube Amp Doctor GmbH
K-ACTWCC Amp-Chassis: Cap Can Cover
Amp-Chassis: Cap Can Cover
used to cover main filter caps at the Tweed Bassman and Tweed Twin. In the amp-kits "Twin"-Style und "Bassman"-Style already included. Also suited for 6G15 Chassis Size: 139mm / 5-1/2" x 102mm / 4"; depth: 38mm / 1-1/2" Mounting plan:...

€19.00 *
Remember Part Number: K-ACTWCC
Tube Amp Doctor GmbH
K-ACDLXRV Amp-Chassis: Deluxe Reverb AB763 Style
Amp-Chassis: Deluxe Reverb AB763 Style
with all holes and cuts. The rearplate and the faceplate are not included. The matching faceplates: K-ACDLXRV-FP + K-ACDLXRV-RP We recommend to order the cap-can-cover (p/n: FCCS) along with this chassis. Chassis dimensions: H: 45mm W:...

€57.00 *
Remember Part Number: K-ACDLXRV
Tube Amp Doctor GmbH
K-ACJTM45 Amp-Chassis: JTM45 Style
Amp-Chassis: JTM45 Style
NEW STYLE: empty Chassis, fits JTM45 small boc head and also 1x12" or 2x12" combo cabinets NOTE: matching gold PLEXI face and backplate are not included. Matching PLEXI Penels can be ordered at K-ACM100FP + K-ACJTM45RP Material:...

€45.01 *
Remember Part Number: K-ACJTM45
Tube Amp Doctor GmbH
K-AC6G15-A Amp-Chassis: Stand Alone Reverb Unit 6G15
Amp-Chassis: Stand Alone Reverb Unit 6G15
Amp-Chassis: Used for the Stand Alone Reverb Unit 6G15 and TAD AMP KIT 6G15 Reverb Unit hot-galvanized plate, corners rivited with all holes and cuts like the original chassis from the early 60s Dimensions: H: 66mm W: 394mm D: 106mm...

€65.50 *
Remember Part Number: K-AC6G15-A
Tube Amp Doctor GmbH
K-ACBM Amp-Chassis: Tweed Bassman 5F6 Style
Amp-Chassis: Tweed Bassman 5F6 Style
chrome finish, with all holes and cuts and printing like the original chassis from the 50s H: 67mm W: 509mm D: 105mm

€99.95 *
Remember Part Number: K-ACBM
Tube Amp Doctor GmbH
K-ACCHMP Amp-Chassis: Tweed Champ Style 5F1
Amp-Chassis: Tweed Champ Style 5F1
chrome finish, with all holes and cuts and printing like the original chassis from the 50s H: 67mm W: 223mm D: 105mm distance mountingholes: 200mm

€67.95 *
Remember Part Number: K-ACCHMP
Tube Amp Doctor GmbH
K-ACDLX Amp-Chassis: Tweed Deluxe 5E3 Style
Amp-Chassis: Tweed Deluxe 5E3 Style
chrome finish, with all holes and cuts and printing like the original chassis from the 50s H: 67mm W: 369mm D: 105mm distance mountingholes: 342mm

€79.94 *
Remember Part Number: K-ACDLX
Tube Amp Doctor GmbH
K-AC5F2 Amp-Chassis: Tweed Princeton 5F2
Amp-Chassis: Tweed Princeton 5F2
chrome finish, with all holes and cuts and printing like the original chassis from the 50s 2 Octal, 1 9-Pin Socket Hole, 2 Inputs, Volume, Tone, Power, Fuse, Pilot Light Dimensions: H: 67mm L: 349mm W: 105mm Dimensions: 13 3/4" L x 4...

€79.94 *
Remember Part Number: K-AC5F2
Tube Amp Doctor GmbH
K-AC5F4.5E5.5E7 Amp-Chassis: Tweed Super 5F4 / PRO 5E5A / Bandmaster 5E7
Amp-Chassis: Tweed Super 5F4 / PRO 5E5A / Bandmaster 5E7
chrome finish, with all holes and cuts and printing like the original chassis from the 50s Dimensions: H: 67mm B: 470mm T: 105mm Dimensions: 18 1/2'' L x 4 1/8'' W x 2 5/8'' H 3 Octal, 3 9-Pin Socket Holes, 2 Channel, 2 Inputs/Channel, 2...

€99.95 *
Remember Part Number: K-AC5F4.5E5.5E7
Tube Amp Doctor GmbH
K-ACTTHP Amp-Chassis: Tweed Twin High-Power 5F8A Style
Amp-Chassis: Tweed Twin High-Power 5F8A Style
chrome finish, with all holes and cuts and printing like the original chassis from the 50s H: 67mm W: 534mm D: 105mm

€99.95 *
Remember Part Number: K-ACTTHP
Tube Amp Doctor GmbH
K-ACTTLP Amp-Chassis: Tweed Twin Low Power Style 5E8
Amp-Chassis: Tweed Twin Low Power Style 5E8
chrome finished amp chassis for 5E8 "low power" Tweed Twin Amp for 4 octal + 4 novel tube sockets: 2x5U4GB, 2 x 5881/6L6WGC, 1 x 12AX7A, 3 x 12 AY7 4 Input, 2 Volume, Bass,Treble, Presence, Fuse, Power, Standby, Pilot Light, Ground...

€99.95 *
Remember Part Number: K-ACTTLP
Tube Amp Doctor GmbH
B-K-ACDLXRV B-Stock: Amp-Chassis: Deluxe Reverb AB763 Style
B-Stock: Amp-Chassis: Deluxe Reverb AB763 Style
Article with traces of usage or installation, fully functional. Tested by TAD and with full warranty ! with all holes and cuts. The rearplate and the faceplate are not included. We recommend to order the cap-can-cover (p/n: FCCS) along...

€41.00 * €64.96 *
Remember Part Number: B-K-ACDLXRV
Mojotone
K-ACCVC-FP Faceplate: Blackface Vibrochamp Style AA764
Faceplate: Blackface Vibrochamp Style AA764
generic front panel for Blackface Vibrochamp Chassis K-ACCVC ca. 385mm x 48mm

€40.34 *
Remember Part Number: K-ACCVC-FP
1 From 2

Amp chassis and faceplates – everything in its place

Protecting the inner values of tube amplifiers, that's what Amp Chassis and Faceplates are for. While the metal chassis house the sensitive electronics inside the amplifier enclosures and bring order to electronic chaos, Faceplates are the friendly face of the tube amplifiers and a quick guide in one.

We offer our customers the suitable Tweed Chassis, Blackface Chassis, Faceplates for Fender, Marshall, and Co., as well as appropriate components for DIY projects.

Especially important to us is a high-quality and precise processing, to achieve the best possible installation and appearance. To equip your own amplifier with the suitable amplifier chassis, the correct dimensioning of the Amp is of particular importance.

Chassis – special features and differences

As is often the case, the big manufacturers have not really coordinated among themselves in the selection and fabrication of their components. DIN standards and uniform dimensions – none in sight!

Nevertheless, to find the right components for one's own Amp, we offer different variants of the metal housings.

Pre-drilled chassis – spare part or new construction

We provide our customers with the suitable chassis for Fender, Marshall, or DIY projects. With Tweed Chassis and Blackface Chassis, our customers can choose from a wide range offered by our own TAD line or by the supplier Mojotone.

All pre-drilled chassis have the necessary and appropriate holes for all connections and fixings needed for the clean wiring of the respective Amp. Especially the precise dimensions of the holes are important for success. Therefore, we check our components very precisely – nothing stands in the way of a successful installation!

Those who want to build their own Amp or really aim for individual solutions are on the right track with one of our unprepared Amp Chassis. The high-quality frames are made from various materials and can be adapted to the respective necessary types of installation. It applies:

  • Plexi: Aluminum
  • Tweed: chrome-plated steel sheet
  • Blackface: galvanized sheet

Faceplates – the friendly face of good sound

Faceplates are usually the most frequently viewed components of an Amp: displays and scales for volume, gain, etc. guide through the otherwise confusing soundscapes. We offer our customers suitable Faceplates for Fender and Marshall, – DIY explicitly welcome!

Amplifier chassis and faceplates – the Doctor helps with experience and selection

Our wide selection of components and our market experience make Tube Amp Doctor THE contact when it comes to the restoration or new construction of high-quality amplifiers. We supply our components wholesale and retail and have convinced a large customer base of our passion for music since 1993. Fair prices and the necessary know-how – that's Tube Amp Doctor!

Viewed