No results were found for the filter!
Cable for Fender Footswitch Reverb/Vibrato with RCA plugs
Cable for Fender Footswitch Reverb/Vibrato with RCA plugs, with shield, black, isolated, Fender 60's-70's style, total lenght 3.8m
Remember
Part Number: CB4020
Extension speaker cable 1,2m
Extension speaker cable 1,2m, Metal phone plug (lockable) to metal phone jack, mono, 6,3mm Perfect to connect the TAD Silencer to comboamps. Can also be used to connect speakers in a combo with tops via a jack cable.
Remember
Part Number: CB7066
LAB Audio Pro Line Instrument Cable with Neutrik Connector
LAB Audio Pro Line Instrument Cable with Neutrik Connector Noise protection, construction quality, sturdiness and audio quality: all at the highest level at an affordable price. The PRO LINE cable has the qualities required by the most...
Remember
Part Number: LAB-PRO-3BLF
Lab Audio Pro Line Patchcabel (1 pcs) Neutrik Connectors
Lab Audio Pro Line Patchcabel (1 pcs) Neutrik Connectors
Remember
Part Number: LAB-PRO-PATCH
Lab Audio Pro Line Patchcabel Set (3 pcs)
Lab Audio Pro Line Patchcabel Set (3 pcs)
Remember
Part Number: LAB-PRO-PATCH3
LAB Audio Signature Line Instrument Cable, Neutrik Silent Connector
LAB Audio Signature Line Instrument Cable, Neutrik Silent Connector The SIGNATURE series: exceptional tensile strength and optimal contact and superior tone. THE cable for the performing musician - live or in the studio. -made with the...
Remember
Part Number: LAB-SIG-3BLF
LAB Audio Signature Line Instrument Cable, with Neutrik Silent...
LAB Audio Signature Line Instrument Cable, with Neutrik Silent Right Angle The SIGNATURE series: exceptional tensile strength and optimal contact and superior tone. THE cable for the performing musician - live or in the studio. -made...
Remember
Part Number: LAB-SIG90-3BLF
LAB Audio Signature Line Patchcabel (1 pcs) with Neutrik Connector...
LAB Audio Signature Line Patchcabel (1 pcs) with Neutrik Connector gold
Remember
Part Number: LAB-SIG-PATCH
Lab Audio Signature Line Patchcabel Set (3 pcs), Neutrik Connectors...
Lab Audio Signature Line Patchcabel Set (3 pcs), Neutrik Connectors gold
Remember
Part Number: LAB-SIG-PATCH3
TAD Amp-Speaker cable, 0.2m
Speaker cable especially for Fender Blackface / Silverface Champ, 0,2m, with RCA Plug, chrome with Terminals, female.
Remember
Part Number: CB7062
TAD Amp-Speaker cable, 0.6m
Speaker cable especially for Combo Amps, 0,6m, with Switchcraft Style straight 1/4" plug with Terminals, female.
Remember
Part Number: CB7061
TAD Amp-Speaker cable, 0.6m, with right angle phon
Speaker cable especially for Combo Amps, 0,6m, with Switchcraft Style Right angle 1/4" plug with Terminals, female. white=hot (+) black=ground (-)
Remember
Part Number: CB7060
TAD Amp-Speaker cable, 0.6m, with Solderless Terminals
Speaker cable for internal connection , 0,6m, with Solderless Terminals, female, for Speakers, 1/4"
Remember
Part Number: CB7065
TAD Amp-Speaker cable, 1.0m
Speaker cable especially for Combo Amps, 1,0m, with Switchcraft Style straight 1/4" plug with Terminals, female.
Remember
Part Number: CB7061-1M
TAD Amp-Speaker cable, 1.0m, with right angle phon
Speaker cable especially for Combo Amps, 1,0m, with Switchcraft Style Right angle 1/4" plug with Terminals, female. white=hot (+) black=ground (-)
Remember
Part Number: CB7060-1M
TAD cable for Hohner Harp Blaster HB52 Bullet Mic, Classic Black
TAD Blues-Harp Micro-Kabel: Classic Black finished guitar cable wired with XLR connector for use with the new Hohner HB52 Harp Blaster Bullet Mic ! NOTE: does NOT fit Astatic JT30 models (and remakes) and the (old) Hohner Blues Blaster...
Remember
Part Number: CB5079-HB52
TAD cable for Hohner Harp Blaster HB52 Bullet Mic, Tweed
TAD Blues-Harp Micro-Kabel: tweed finished guitar cable wired with XLR connector for use with the new Hohner HB52 Harp Blaster Bullet Mic ! NOTE: does NOT fit Astatic JT30 models (and remakes) with XLR jack and the (old) Hohner Blues...
Remember
Part Number: CB5078-HB52
TAD Harp-Mic cable, Amphenol / 1/4" plug 6 m, Vintage Tweed
TAD Harp-Mic cable, Amphenol CO250IF / 1/4" metal phone plug 6 m, Vintage Tweed Picture 3 shows cable with the suitable microphone "H-JT30RH" which is NOT included with the cable
Remember
Part Number: CB5077
TAD Harp-Mic cable, XLR / Klinke, 6 m, classic black
TAD Blues-Harp Micro-Kabel: guitar cable wired with XLR connector for use high-Z Harmonic "blues harp" microphones. These are the legendary Astatic JT30 models (and remakes) with XLR jack and the (old) Hohner Blues Blaster 1492. NOTE:...
Remember
Part Number: CB5079
TAD Harp-Mic cable, XLR / Klinke, 6 m, Vintage Tweed
TAD Blues-Harp Micro-Kabel: tweed finished guitar cable wired with XLR connector for use high-Z Harmonic "blues harp" microphones. These are the legendary Astatic JT30 models (and remakes) with XLR jack and the (old) Hohner Blues Blaster...
Remember
Part Number: CB5078
TAD Instrument cable, 3m, classic black, w/NTRK-style plug
TAD Instrument cable, 3m, BLACK, w/NTRK-style-connectors w/Gold-Tip super flexible but at same time a very good braided screen (no carbon screen which would tend to steal the airy breath and transparency from the tone)
Remember
Part Number: CB5034
TAD Instrument cable, 6 m, Vintage Tweed, w/NTRK-style plugs
TAD Instrument cable, 6 m, Vintage Tweed, w/NTRK-style-connectors w/Gold-Tip super flexible but at same time a very good braided screen (no carbon screen which would tend to steal the airy breath and transparency from the tone) An...
Remember
Part Number: CB5074
TAD Instrument cable, 6m, BLACK, w/NTRK-style-GOLD-TIP-connector
TAD Instrument cable, 6 m, BLACK, w/NTRK-style-connectors w/Gold-Tip super flexible but at same time a very good braided screen (no carbon screen which would tend to steal the airy breath and transparency from the tone) An amazing guitar...
Remember
Part Number: CB5076
Top seller
Viewed