window.ga=window.ga||function(){(ga.q=ga.q||[]).push(arguments)};ga.l=+new Date; ga('create', 'UA-177780411-1', 'auto'); ga('set', 'forceSSL', true); ga('set', 'anonymizeIp', true); ga('require', 'displayfeatures'); ga('require', 'cleanUrlTracker'); ga('require', 'outboundLinkTracker'); ga('require', 'ec'); ga('send', 'pageview'); ga('set', 'nonInteraction', true); setTimeout("ga('send', 'event', 'read', '20 seconds')", 20000); Buy Amp Parts | Tube Amp Doctor

Amp Parts

Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
 
from to

Chassis

  •  
1 From 11
No results were found for the filter!
Tube Amp Doctor GmbH
FPLL10 10er Packung FPLL
10 piece package of FPLL
pilot light: primary used by Fender®, 6.3V, replaces #47, also used for Mesa Boogie original part number 703047 also used in the VOX AC15HW1 and AC30HW1. Replacement for the 530000002265

€6.00 *
Remember Part Number: FPLL10
Tube Amp Doctor GmbH
RK-9VBLOCK 9V Blockbatterie
9V battery
9V battery

From €2.92 *
Remember Part Number: RK-9VBLOCK
Tube Amp Doctor GmbH
GA1590BL Aluminium-Gehäuse, SCHWARZ, für DIY Projekte, unge
Aluminum Box mod.1590, BLACK, for DIY projects
Aluminum Box mod.1590, BLACK, Box, incl. black screws, perfect for DIY projects Dimensions: 119x 94x 35mm

€10.90 *
Remember Part Number: GA1590BL
Tube Amp Doctor GmbH
GA1290BL Aluminium-Gehäuse, SCHWARZ, klein, für D.I.Y. Projekt
Aluminum Box, BLACK, small Version, for DIY projec
Aluminum Box, BLACK, Box, incl. black screws, perfect for DIY projects Dimensions: 110x 60x 31mm

€9.98 *
Remember Part Number: GA1290BL
Tube Amp Doctor GmbH
Z-KBA Aluminiumfolie, selbstklebend zur Abschirmung, 100
Aluminum foil, self-adhesive, 100mm width
Aluminum foil, self-adhesive, perfect for shielding of DIY projekts, easy to use. 100mm width. Price is per meter Picture shows processing

€1.95 *
Remember Part Number: Z-KBA
Tube Amp Doctor GmbH
BM-SW1-BLECH Alu-Blech 42x35, 2mm, ideal für alte Plexi und JMP Marshall bis Bj `79
Aluminum plate black anodized, 42x35mm, 2mm thick
Aluminum plate black anodized, 42x35mm, 2mm thick. In conjunction with our SW1020 (see recomendation below) the perfect item to install a reliable impedance selector switch in older Marshall's (Plexis and JMP´s up to ´79, hole spacing...

€3.95 *
Remember Part Number: BM-SW1-BLECH
Spares for Fender
FPLAM BERNSTEIN Linse ''Fender Pilot Light'', mit Facettenschliff
AMBER pilot light lens, jeweled, jazzy!
primary used by Fender® fits also the younger Orange amps.

€3.50 *
Remember Part Number: FPLAM
Vox Amps
HR2050 Schutzecke, schwarz, Kunststoff (VOX AC30, Orange)
Amp Corner, black, pastic (VOX AC30, Orange)
black plastic amp corner like used with the VOX AC30® and many more VOX® amps from 1966 to 2004 and Orange® amplifier models since the 1960's till today.

€1.79 *
Remember Part Number: HR2050
Spares for Fender
FAC Schutzecke, vernickelt, für 2 Schrauben, vintage
Amp Corner, chrome/nickel plated, 2 screw version,
1 piece Amp Corner, for 2 screws with lip, nickel/chrome finish screws NOT included (see below) we recommend to use the matching screws: HR3040 screws primary used by Fender® since 1960s, but also fits old Ampeg SVTs, and SVT-200T

€1.95 *
Remember Part Number: FAC
Vox Amps
VH Verstärker-Griff für VOX®, schwarz, Diamond Muster
Amp handle for VOX® amps, black, w/ loops, diamond
black amp handle VOX style, fits VOX® for AC30, AC15, AC50 and many other amps includes authentic slotted screws and t-nuts for mounting. new Super Quality: approved tested load capacity 40kg !! total length: 190mm mounting loop hole...

€12.95 *
Remember Part Number: VH
Tube Amp Doctor GmbH
FACA Verstärker-Steckrolle einzel
Amp swivel caster
Amp swivel caster (for Fender)

€8.90 *
Remember Part Number: FACA
Tube Amp Doctor GmbH
K-ACTWCC Amp-Chassis: Cap Can Cover
Amp-Chassis: Cap Can Cover
used to cover main filter caps at the Tweed Bassman and Tweed Twin. In the amp-kits "Twin"-Style und "Bassman"-Style already included. Also suited for 6G15 Chassis Size: 139mm / 5-1/2" x 102mm / 4"; depth: 38mm / 1-1/2" Mounting plan:...

€19.00 *
Remember Part Number: K-ACTWCC
Tube Amp Doctor GmbH
FGLBL AMPEG Leder Griff (Lederimitat), verstärkt, mit Beschlägen, schw
Ampeg Leather handle, raised w/loops, black
Ampeg Leather handle (artifical leather), raised w/loops, black length (flat): 22.5cm mounting: 16,8cm wide (max.): 2.8cm Thickness: (max in middle of handle ca. 8mm) Mountingcenter of brackets: 3.5cm

€16.80 *
Remember Part Number: FGLBL
Spares for Fender
FACU-MB4 Schutzecke, universal, schwarz, 4 Stk. Pack
Black 3-Leg Corners No Lip / Set of 4 (with Screws)
Black 3-Leg Corners, Steel, No Lip / Set of 4 (with Screws) Weight: .25 lb

€7.45 *
Remember Part Number: FACU-MB4
Tube Amp Doctor GmbH
FGLHD-B Schwarzer Kunstledergriff mit Beschlägen inkl. Einschlagmuttern u. Schrauben
Black leatherette handle incl. T-nuts and screws
Used by Mesa Boogie® and others. Super heavy duty!! Dimensions: distance between center mounting loops: 48mm and 192mm handle, flat dimensions: 210 x 30 x 10mm (l x w x h)

€15.80 *
Remember Part Number: FGLHD-B
Spares for Fender
FPLBL BLAUE Linse ''Fender Pilot Light'', mit Facettenschliff
BLUE pilot light lens, jeweled, California style
primary used by Fender®

€3.50 *
Remember Part Number: FPLBL
Tube Amp Doctor GmbH
RK-BR1 Brückengleichrichter, KBPC604, 400V, 6A für Marshall JCM900, DSL2000
bridge rectifier, KBPC604, 400V, 6A, for Marshall JCM900, DSL2000
bridge rectifier, KBPC604, 400V, 6A, for Marshall JCM900, DSL2000 high performance bridge rectifier (upgrade !!!) as used in Marshall JCM900 (2100-SLX, 2500-SLX) and JCM2000 (TSL100, TSL60, DSL100, DSL401 etc) for DC filament of the...

€8.90 *
Remember Part Number: RK-BR1
Tube Amp Doctor GmbH
FGLHD Brauner Kunstledergriff mit Beschlägen inkl. Einschlagmuttern u. Schrauben
Brown leatherette handle incl. T-nuts and screws
Fits nicly with tweed covered cabinets, used by Mesa Boogie® and others. Super heavy duty!! Dimensions: distance between center mounting loops: 48mm and 192mm handle, flat dimensions: 210 x 30 x 10mm (l x w x h)

€15.80 *
Remember Part Number: FGLHD
Tube Amp Doctor GmbH
VPLL Birne , 6.3 V, Schraubgewinde, z.B. für Vox AC30
Bulb, 6.3V, screw base, for Vox AC30
VOX Pilot Light Lamp, bulb 6.3V, screw base, for older VOX AC30

€1.25 *
Remember Part Number: VPLL
Tube Amp Doctor GmbH
FGLHD-R Weinroter Kunstledergriff mit Beschlägen inkl. Einschlagmuttern u. Schrauben
Burgundy leatherette handle incl. T-nuts and screws
Used by Mesa Boogie® and others. Super heavy duty!! Dimensions: distance between center mounting loops: 48mm and 192mm handle, flat dimensions: 210 x 30 x 10mm (l x w x h)

€15.80 *
Remember Part Number: FGLHD-R
Tube Amp Doctor GmbH
HR9290 Käfigmutter für TAD Chassis (Plexi Kit)  oder Marshall© JPM, JCM Chassis
Cage-nut for TAD Aluminum Chassis or Marshall© JPM, JCM Chassis
Cage-nut for for TAD Aluminum Chassis z.B. K-ACM100WNH or Marshall© Chassis used in JMP, JCM800, JCM900 and others, M6/SQ9,5 one piece matching screw find here: HR9291

€0.90 *
Remember Part Number: HR9290
Mesa Boogie
Z-MB-HR002 Gehäuseschraube für Mesa Boogie (10/24 x 4 1/8)
casing screw for Mesa Boogie (10/24 x 4 1/8)
casing screw for Mesa Boogie (10/24 x 4 1/8) Chassis Screw - Mate with Nickel Chassis Strap or Nickel Belt Washer Used for: Buster Bass Amps Lone Star Lone Star Special Tremoverb Road King Roadster Royal Atlantic RA-100 Rect-O-Verb 50

€5.80 *
Remember Part Number: Z-MB-HR002
Mesa Boogie
Z-MB-HR001 Gehäuseschraube für Mesa Boogie #6-32 X 1/4
casing screw for Mesa Boogie #6-32 X 1/4 Phillips Flat Head...
Screw - #6-32 X 1/4 Phillips Flat Head Threadrolling Undercut Chassis Screw used for: Big Block 750 CabClone M6 Carbine M9 Carbine Mini Rectifier Rectifier Recording Preamp Simul 2:Ninety Stereo 2:Fifty WalkAbout + Newer All-Metal...

€1.30 *
Remember Part Number: Z-MB-HR001
Spares for Fender
FCS3 Chassis Strap (3''''), für Fender Champ®, Vibro Cham
Chassis Strap (3''), for Fender Champ®, Vibro Cham
Chassis Strap (3''), monting center = 7,5 cm, nickle/chrome finish 1 piece used by Fender Champ®, Vibro Champ® etc. since 1964 matching screws/bolts and nuts available here: FSCS + HR3121

€13.85 *
Remember Part Number: FCS3
1 From 11

Amp Parts – Reviving Tired Amps

Analog amps are subjected to tough conditions, both internally and externally: High voltages challenge the amplifier fuses. Careless bandmates damage the precious exterior – the small and large bruises our amps have to endure over the years make one repair or another inevitable. But that's okay!

Fortunately, Tube Amp Doctor offers the right replacement parts and components to get amps from Vox, Marshall, Fender, and other brands back in shape.

Which parts do we carry?

With over 650,000 components, there are hardly any amp parts we don't have in stock. We offer our parts in nine categories:

Metal Parts / Screws

Here, you'll find everything needed for quick repairs: fittings and metal parts for the worn-out housing as well as screws and nuts for all matters related to the tube amplifier.

Solder Strips, Boards, and PCBs

Here, you'll find high-quality solder boards for use in classic and modern amplifiers. We offer Fender parts as well as parts from Laney and Mojotone.

Amp Logos

The last transport in the tour bus tore the amp logo off the amplifier? No problem, we have all conceivable logos. Of course, of the highest quality and in accordance with historical models!

Amplifier Handles

It should be safe and secure: amplifier handles make the arduous transport of one's own amp much more comfortable. Unfortunately, every material has its end. Therefore, we offer suitable and durable handles. Get a grip!

Diodes, Transistors, and ICs

A wide variety of electronic components can be found here, from the JRC for Ibanez Tubescreamer to diodes and Germanium transistors, we offer hobbyists everything they could wish for their own tube amp.

Fuses and Holders

The sound suddenly gone? It could be the last remaining fine fuse – good thing the Doctor has a wide range in stock. And even if the fuse holder is lost, we can provide a remedy with new goods!

Pilot Lights

Small bulbs, colored lenses, and all kinds of control lights make operating one's own equipment clear and easy. If a bulb ever goes out, hobbyists can find replacements here.

Back Panels

Inputs and outputs need to be correctly labeled, for new amps as well as existing models. We carry backplates for the correct connection!

Other Components

From the 9V block battery to the aluminum housing for DIY projects – everything we equipment nerds love, need, or have always wanted.

Amp Parts from TAD – A wealth of experience and fair prices for absolutely good sound!

Since 1993, we've offered our customers a rich selection of spare parts, tubes, and components for amplifiers. Over the years, we've continuously adapted our amp parts to the needs and requirements of our customers, and we can now also look at a stock of over 650,000 components. With our experience and our love for sound, we support our customers in their projects and stand by with advice, action, and enthusiasm!

Viewed