No results were found for the filter!

B-STOCK: Grill Cloth TAN & BROWN (made in USA) slightly darker stripe along the length of the roll . See picture! used by Fender® for the brown tolex models: Vibroverb, Princeton, Deluxe, Concert, Tremulox, Reverb 6G15 and some blonde...
Remember
Part Number: B-FGCT.B

Baby Blue aka Light Blue Tolex covering fabric, primarily used by Fender® for various limited edition amplifers. best and heavy quality, white sheeting on back side width: 138 cm (usable wide: 132cm) made in USA Various options/lengths...
Remember
Part Number: FTBB-100

primary used by Vox®, Hiwatt®, Laney® width: 136cm Made in USA Various options/lengths can be ordered. Goods by the metre will be shipped in one piece and additional shipping costs do apply (oversize surcharge) Available lengths without...
Remember
Part Number: VHTB-100

width: 132 cm made in USA Various options/lengths can be ordered. Goods by the metre will be shipped in one piece and additional shipping costs do apply (oversize surcharge) Available lengths without oversize surcharge: 1 piece 100cm 1...
Remember
Part Number: FTBC-100

Black Elephant Tolex was also used by Marshall® since the 1960s on custom colour amplifiers. This tolex is also used on our Marshall® style Plexi Cabinets. width: 127 cm Made in USA Various options/lengths can be ordered. Goods by the...
Remember
Part Number: MTBE-100

Black Levant Tolex was also used by Marshall® since the 1960s on custom colour amplifiers. This tolex is also used on our Marshall® style Plexi Cabinets. width: 138 cm Made in USA Various options/lengths can be ordered. Goods by the...
Remember
Part Number: MTB-100

primary used by Marshall ® , used since late 1980´s till today on most models (equals ME-FRETM0017) used for example on models JCM800 (z.B. 2203) , JCM900 (z.B. High Gain Dual Reverb), JCM2000 (DSL100 ) this is the orignal knitted fabric...
Remember
Part Number: MGCB-100

Black-on-Green Levant tolerx covering same as used on our Marshalll®/Plexi style Black-On-Green cabinets; Marshall ueed greenish black tolex during the 1960. width: 136 cm Made in USA Various options/lengths can be ordered. Goods by the...
Remember
Part Number: MTGB-100

primary used by Fender®, Soldano® etc. width: 132 cm Made in USA Various options/lengths can be ordered. Goods by the metre will be shipped in one piece and additional shipping costs do apply (oversize surcharge) Available lengths...
Remember
Part Number: FTBSN-100

width: 138 cm Made in USA Various options/lengths can be ordered. Goods by the metre will be shipped in one piece and additional shipping costs do apply (oversize surcharge) Available lengths without oversize surcharge: 1 piece 100cm 1...
Remember
Part Number: FTBT-100

primary used by Fender® '63-'90s, Boogie®, Soldano best and heavy quality with black back sheeting width: 138 cm (usable wide: 132cm) Various options/lengths can be ordered. Goods by the metre will be shipped in one piece and additional...
Remember
Part Number: FTBL-100

Black vinyl COVER fabric with fleece back 139cm wide DISCONTINUED: supply limited to actual stock Various options/lengths can be ordered. Goods by the metre will be shipped in one piece and additional shipping costs do apply (oversize...
Remember
Part Number: FPFK40-100

brown aligator Tolex (vinyl) width: 137 cm made in USA Various options/lengths can be ordered. Goods by the metre will be shipped in one piece and additional shipping costs do apply (oversize surcharge) Available lengths without oversize...
Remember
Part Number: FTBG-100

width: 138 cm Made in USA Various options/lengths can be ordered. Goods by the metre will be shipped in one piece and additional shipping costs do apply (oversize surcharge) Available lengths without oversize surcharge: 1 piece 100cm 1...
Remember
Part Number: FTBRW-100

primary used by Fender® '60-'63 width: 138 cm Made in USA Various options/lengths can be ordered. Goods by the metre will be shipped in one piece and additional shipping costs do apply (oversize surcharge) Available lengths without...
Remember
Part Number: VTF-100

Fender Style Grill Cloth SILVER, Black, AQUA, , 90 cm high NOTE: Fender Grill Cloth pattern requires amp- width + 10cm as order quantity
Remember
Part Number: FGCS.A

gold colour t-strip separating fret cloth and tolex section on front side of the VOX AC30 amp cut piece for VOX AC30 (75cm)
Remember
Part Number: VGFS

gold colour t-strip separating fret cloth and tolex section on front side of the VOX AC30 amp Height: 6,2mm width: 10mm NOTE: no returns or refund on custom cutted products
Remember
Part Number: VGFSM

gold String, per meter primary use: Vox d=2.3mm
Remember
Part Number: VGSM

Grill Cloth SILVER & BLACK 170cm high Grill Cloth SILVER & BLACK as used for all blackface and reissue Fender Amps in combination with BLACK TOLEX FTBL covering. This XtraLarge size is 160wide (=Fender pattern: HIGH!) and is used for the...
Remember
Part Number: FGCS.BXL

This basket weave quality originally has been made from same manufacturer in England as the regular Marshall thin black grill material (as used today) or the S&P used for the Marshall Plexi amps. Clearly deeper black, more solid and...
Remember
Part Number: MGCBB-100

Grill Cloth OXBLOOD (made in USA) primary used by Fender® '60s, Fender® Custom Shop orderable in 2 lengths: FGCOX-60: width x height = 60x90cm FGCOX-100: width x height = 100x90cm Please note: the height determines the correct pattern!...
Remember
Part Number: FGCOX-100

Grill Cloth OXBLOOD WITH STRIPES (made in USA) primary used by Fender® 57-60 Please note: the height determines the correct pattern! If you need to re-do the front cloth of a 2x12" cab/combo-amp, you need to order the bigger size.
Remember
Part Number: FGCOXS-2-100
Top seller
Viewed