No results were found for the filter!

used in in Audio Innovations L2 and P2
Remember
Part Number: S0A2

0B2 voltage regulator (108C1,CV1833, 6074, M8224) gas discharge tube
Remember
Part Number: S0B2

voltage regulator / Gas discharge tube picture might show different brand/version
Remember
Part Number: S0B3

0C3A / 0C3W Gas discharge tube / 105 volt regulator, octal base, aka VR-105, WY-3P A Gas discharge tube / voltage regulator is used as a shunt regulator to hold a voltage constant at a pre-determined level
Remember
Part Number: S0C3

Rich-sounding Reverb Driver - Also Great for Headphone Amps! Low noise tube, selected for best symmetry and balance. A strong driver tube and a wounderfully rich-sounding reverb driver. Also used in the great Brocksieper EARMAX / EARMAX...
Remember
Part Number: RT002

The Original US-made mil. Grade JAN Version in TAD Premium NOS-Selection quality This tube is used in old Fender amps or hi-fi applications and produces a smooth reverb. It replaces the 6201, E81CC and ECC801. upgrades ECC81 and 12AT7....
Remember
Part Number: RT004

12AU6 RCA NOS/NIB, Sharp-Cutoff Pentode equivalent to HF94 and CV1961 Uf=12,6V typcial use in car radio
Remember
Part Number: S12AU6

The Perfect Choice for Stereo Audio Applications - Ideal as a Balanced Driver Latest revision providing great musical performance and rich tone. This TAD 12AU7A / ECC82 has especially strong systems which are selected to provide two...
Remember
Part Number: RT005

TAD 12AU7WA Premium NOS-Selection, made in USA This long-plate 6189W is the mil. grade High-end version of ECC82 and 12AU7A tubes sourced from NOS stocks made by GE and SYLVANIA. Beloved for the best tone and superior definition with...
Remember
Part Number: RT085

Very quiet but powerful. This great symmetrical and balanced tube is your perfect choice for demanding Hi-Fi amps, and works perfectly as a pushing driver stage in instrument amplifications, also. Somewhat more stringent and defined with...
Remember
Part Number: RT065

Perfectly BALANCED PHASE DRIVER Tube !! A perfectly balanced 12AX7 will allow the tube output stage to perform at its optimum for smooth tone and definition. The overall responsiveness will be significantly improved by revealing the full...
Remember
Part Number: RT001-BPD

Perfect V2+ Preamp Tube - Good Gain - Tight Deep Bass - Fat Mid-range!! The TAD 12AX7A-C / ECC83 TAD Premium Selected provides very good gain, tight deep bass, fat mids and silky top end with overall definition and brightness. Selected...
Remember
Part Number: RT001

A reliable classic American military spec 12AX7 with warm tone, very smooth and tonally balanced throughout the frequency range.. These are JAN versions from later 1970 to early 80s and have long gray plates with copper grid posts and...
Remember
Part Number: S12AX7A-SYL

GE 12AX7WA JAN NOS / NIB made in USA, Bj.1975 note: limited supply. we can't back-order when sold out.
Remember
Part Number: S12AX7-GE

Maintain Your Amp's Original Tone! Very low noise but slightly less gain than a regular 12AX7. Soft highs and edgy, dominant mids. Our recommendation when your amp has microphonic issues. This tube is used in many Fender amps made today....
Remember
Part Number: RT006

12AY7 (6072a) JJ Electronic Base: NOVAL Uf = 6,3 or 12,6 V If = 300 or 150 mA Typical Characteristics: Ua = 250 V Ug = -4 V Ia = 3,0 mA S = 1,75 mA/V Ri = 22,8 kΩ μ = 40 Limiting Values: Ua = 300 V Ug = -50 V Wa = 1,5 W Uk/f = ±90 V Ik =...
Remember
Part Number: NN037

Tweed Up Your Amp! Vintage tone for original vintage Fender tweed amps. The original tube for all those Fender® tweed amps from the 50s. Brings back the original sound to your tweed amp. The 6072a is also used in high quality tube...
Remember
Part Number: RT070

TAD 12AY7 with GOLD-PINS Stereo-HiFi-Selection Especially for Audio-Stereo applications selectet 12AY7 / 6072a with extremly low tolerances in amplification factor for perfectly balanced stereo channels. Note: this selection is not...
Remember
Part Number: RT007-GB

Tweed Up Your Amp! > Vintage tone for original vintage Fender tweed amps. The original tube for all those Fender® tweed amps from the 50s. Brings back the original sound to your tweed amp. Q: When does a preamp tube become a Premium...
Remember
Part Number: RT007

General Electrics (USA) 12BH7A double triode, NOS
Remember
Part Number: S12BH7-GE

12BH7A NOS, RCA (amc branded) Strong driver tube, used in certain HiFi amps, Hammond organs and many vintage Ampeg Amps like the good ol' Ampeg SVT.
Remember
Part Number: S12BH7-RCA

SYLVANIA (USA) 12BH7A double triode, NOS
Remember
Part Number: S12BH7-SYL-MP

The new TAD 12BH7A is an alternative for the TAD 12BH7A-STR in a more compact design (less high) and slightly higher gain. The mechanical built quality is outstanding and grants super low noise performance, ruggedness and long life. The...
Remember
Part Number: RT046
Top seller
Viewed