No results were found for the filter!
pc mount, black plastic nut (used by Marshall JCM900 and JCM2000 series), original CLIFF / UK 1/4"Phone Jack, plastic, mono, shorting, pc mount, insulated also used in the 90´s VOX AC30 TB amps made by Marshall UK. fits Marshall 4100,...
Remember
Part Number: CO1020
1/4" Metal Phone Jack, mono, locking type
Remember
Part Number: CO205
1/4" Metal Phone Plug w/GOLD tip, mono, straight
Remember
Part Number: CO288
1/4" Metal Phone Plug, mono, classic design, right angle
Remember
Part Number: CO226
1/4" Metal Phone Plug, mono, right angle
Remember
Part Number: CO236
1/4" Metal Phone Plug, mono, right angle, replacement for CO226
Remember
Part Number: CO226-H
1/4" Metal Phone Plug, mono, straight
Remember
Part Number: CO285
1/4"Phone Jack , plastic thread, stereo, PC-mount, Switchcraft Style N114B Used by Peavey, Switchcraft Style N114B
Remember
Part Number: CO1090IS
STEREO, shorting, PC MOUNT 6.3mm = 1/4" phone jack, great version with very tight closing contacts * This jack has switching contact of very good and dependable quality. Poor contact grip is the most likely reason for intermittant...
Remember
Part Number: CO1055PC
1/4'' Phone Jack Jack, plastic with chrome nut, Chassis Isolated Version, STEREO, with DPDT switch , for Modifications or Custom Made Products
Remember
Part Number: CO1110IS
1/4"Phone Jack Jack, plastic with chrome nut, STEREO, with DPDT switch , for Modifications or Custom Made Products
Remember
Part Number: CO1110
pc mount, shorting contact, orig. CLIFF / UK Input jack of the Masrhall MG100 DFX FX-foop and footswitch jacks of the Marshall JCM2000 series
Remember
Part Number: CO1060
Used by Peavey, Switchcraft Style 114B
Remember
Part Number: CO1090
with chrome nut, stereo, shorting, solder lugs for wire connection 6.3mm = 1/4" phone jack, great version with very tight closing contacts * This jack has switching contacts of very good and dependable quality. Poor contact grip is the...
Remember
Part Number: CO1055
shorting, 3/8" bushing
Remember
Part Number: CO120
mono, shorting, PC MOUNT, repalces exactly the orig. CLIFF jacks 6.3mm = 1/4" phone jack, great version with very tight closing contacts replacement for the Marshall SKTP00009 jack * This jack has switching contact of very good and...
Remember
Part Number: CO1050PC
6 solder lugs, shorting, with black chrome nut and washer, insulated from chassis. Headphone Jack for the Marshall JMP-1
Remember
Part Number: CO1096
6 solder lugs, shorting, old version with black nut and washer, insulated from chassis. Headphone Jack for the Marshall JMP-1
Remember
Part Number: CO1096-A
1/4"Phone Jack, plastic with chrome nut, STEREO, shorting, PC MOUNT, Belton original BPJ-BBB-P (6.5) 6.3mm = 1/4" phone jack, great version with very tight closing contacts * This jack has switching contact of very good and dependable...
Remember
Part Number: CO1055PC-BT
4 solder lugs, shorting, with chrome nut and washers, insulated from chassis (used from Marshall up to 1979) , replaces exactly the orig. CLIFF jacks 6.3mm = 1/4" phone jack, great version with very tight closing contacts * This jack has...
Remember
Part Number: CO1050
solder taps primary used by Marshall JCM series: model 2204, 2203 vertical inputs, 6100, 6101 etc.
Remember
Part Number: CO1030
drop-in replacement for the vintage Bulgin Pig-Nose chassis mount connector but allowing to connect a regular IEC style ac-cord instead of the unsecure orig. cord with Bulging connectors. fits in Bulgin mounting hole (1-1/8" ~ 28.6mm),...
Remember
Part Number: MBBREP
perfect drop-in for all TAD Plexi Style chassis like: K-ACM100W , K-ACJTM45, K-ACM18W snap-in mounting
Remember
Part Number: MBBIEC
mono, locking type perfect tool for the extension of speaker cables in Combo amps and enables to use the TAD Silencer with a speaker cables (CB7025)
Remember
Part Number: CO210
Top seller
Viewed