No results were found for the filter!
Hint!
SWITCHCRAFT 1/4" Phone Jack, metal, mono, shorting, 3/8" bushing This jack was and still is the standard in guitar amps in the US! Still in use by Fender and many others! Recommended for most older Fedner amps. Also used in the TAD Tweed...
Remember
Part Number: CO12A
combined wood + machine thread incl. lock nut as used by Fender® since 1968 packing unit: 1 piece total length: 35mm matching special hex-nut: HR3121
Remember
Part Number: HR3055
Black metal jack plate of the TAD Cabinets or for DIY projects Accepts 3/8" Jacks, holes for fixing: 3.2 mm
Remember
Part Number: HR3250
primarily used by Fender® 1950 till today total length: 1,42 diameter: 0.157" head diameter: 5/16" matching special hex-nut: HR3121 Fits also Fender Chassis mounting with the short screws and clamps like seen on: 70/135W Silverfaceamps...
Remember
Part Number: HR3050
SWITCHCRAFT 1/4" Phone Jack L12A, with extra long bushing (9,00mm / 0.375") identical withj Swichcraft L11 if shorting contact is not connected
Remember
Part Number: CO12A-L
Scews for speaker mounting (Celestion, Jensen, Eminence etc.) in TAD-cabinets, 10-32 x 5/8" thread: 19mm PU: 1 piece fits TAD cabinet series: RSC112, RSC210, RSC212MC, RSC212-MBB, RSC412, RSC115MC and all Combo-Cabinets of the Plexi Series
Remember
Part Number: HR3170
Scews for speaker mounting (EV, JBL etc.) in US-cabinets, 10-32 x 1" EXTRA long, 25.4mm (=1") diameter ca. 4.83mm PU: 1 piece fits TAD cabinet series: RSC112, RSC210, RSC212MC, RSC212-MBB, RSC412, RSC115MC and all Combo-Cabinets of the...
Remember
Part Number: HR3171
Marshall Cabinet Connector plate ensures the ultimate impedance flexibility: - mono stereo switching - the two Mono impedance options provide extra amp impendance matching capabilities Dimensions: L x H x D: 120mm x 90mm x 56mm Cutout...
Remember
Part Number: ME19605000
Genuine Celestion Gaskets for Front-Loading 12" This set of 4 gaskets allows you to front-load any Celestion 12" speaker into the corresponding cabinet. When ordering 60 sets, the gaskets will be shipped in bulk without being packed in...
Remember
Part Number: LCE-GSKT12-SET
Speaker cable for internal connection , 0,6m, with Solderless Terminals, female, for Speakers, 1/4" white = + / black = -
Remember
Part Number: CB7065
Screws for speaker mounting (Celestion, Jensen, Eminence etc.) used in Marshall Cabinets up to 2004 For cabinets after 2004 please see item HR3176 M5x25 (metric 5mm diameter, 25mm lenght) fits Marshall cabinets 1960A, 1960B, 1982, 1936,...
Remember
Part Number: HR3175
Speaker cable especially for Fender Blackface / Silverface Champ, 0,2m, with RCA Plug, chrome with Terminals, female. white = + / black = -
Remember
Part Number: CB7062
Screws for speaker mounting (Celestion, Jensen, Eminence etc.) Marshall Cabinets from 2004 on M5x20 (metric thread, 5mm diameter, 20mm lenght) fits Marshall cabinets 1960A, 1960B, 1960AX, 1960BX, 1960TV, 1936, 1933 and many others...
Remember
Part Number: HR3176
Baffle Converter 12" to 10" useful converter to install a 10" speaker into a 12" baffle board; simply mounted into the 12" recess. thickness of wood: 7/16'' or 11mm is supplied with 4 nuts for speaker mounting.
Remember
Part Number: K-C12TO10
Baffle Converter 15" to 12" useful converter to install a 12" speaker into a 15" baffle board; simply mounted into the 15" recess. thickness of wood 11mm
Remember
Part Number: K-C15TO12
Top seller
Viewed