End bells and parts for transformer

No results were found for the filter!

TFC-96-H Transformator-Haube, 3 3/4" . Mit Bohrung für Slotted Lamination

End bell for lamination 3 3/4" silver-zinc finish

transformer end bell for 3 3/4" (EI96) lamination, supports slotted lamination mounting, for Marshall 784-139 and many other British output transformers with 50W

€9.60 *

Remember Part Number: TFC-96-H

TFC-96 Trafohaube für Blech EI96, schwarz

End bell for lamination 3,75", black

End bell for upper cover for lay down transformers with 3,75" lamination for 125P26A, 125P6A, , AC30A, M100PN, M100A etc. Size: 96x81mm Mounting: 79x64mm Ø=6 deep: 26.5mm note: these end-bells are basic protection covers for...

€3.74 *

Remember Part Number: TFC-96

TFC-96-V Trafohaube für Blech EI96, schwarz

End bell for lamination 3,75", black

End bell for cover for vertical transformers with 3,75" lamination. Size: 96x81mm Mounting: 79x64mm Ø=6 deep: 26.5mm note: these end-bells are basic protection covers for transformers. Slight imperfections in the finish may occur.

€3.74 *

Remember Part Number: TFC-96-V

TFC-96-S Trafohaube für Blech EI96, silber

End bell for lamination 3,75", silver

End bell for upper cover for lay down transformers with 3,75" lamination for 125P26A, 125P6A, , AC30A, M100PN, M100A etc. Incl. holes for slotted lamination. Size: 96x81mm Mounting: 79x64mm deep: 29.5mm LIMITED SUPPLY

€10.40 *

Remember Part Number: TFC-96-S

TFC-76 Trafohaube für Blech EI76, schwarz

End bell for lamination 3", black

End bell for upper cover for lay down transformers with 3" lamination photo shows similar item Size: 76x64mm Mounting: 64x51mm Ø=5 deep: 17.5mm note: these end-bells are basic protection covers for transformers. Slight imperfections in...

From €2.77 *

Details

Remember Part Number: TFC-76

TFC-41.2-R Transformator-Rahmen, 4 1/2" . Mit Bohrung für Slotted Lamination

End bell for lamination 4 1/2" , silver

transformer mounting frame for 4 1/2" (EI114) lamination for HW100A, TG9302, SC120P etc. Mounting: 95x76mm

€10.40 *

Remember Part Number: TFC-41.2-R

TFC-41.2-V Transformator-Haube, 4 1/2" (EI114). Mit Bohrung für Slotted Lamination

End bell for lamination 4 1/2" (EI114), silver-zinc finish

transformer end bell for 4 1/2" (EI114) lamination, silver-zinc finish, supports slotted lamination mounting, for OR120P, OR120A

€12.70 *

Remember Part Number: TFC-41.2-V

TFC-41.2-H Transformator-Haube, 4 1/2". Mit Fußwinkel und Bohrung für Slotted Lamination

End bell for lamination 4 1/2", for upright mounting, silver-zinc...

transformer end bell for 4 1/2" (EI114) lamination, supports slotted lamination mounting, for GTP104-9V, SUNN3-12PT, Dagnall C1998 etc.

€13.40 *

Remember Part Number: TFC-41.2-H

TFC-41.2-D Transformator-Haube, 4 1/2" . Mit Bohrung für Slotted Lamination

End bell for lamination 4 1/2", silver-zinc finish

transformer end bell for 4 1/2" (EI114) lamination, supports slotted lamination mounting, for Drop-Through mounting

€10.90 *

Remember Part Number: TFC-41.2-D

TFC-105 Trafohaube für Blech EI105, schwarz

End bell for lamination 4 1/8", black

End bell for upper cover for lay down transformers with 4 1/8" lamination Size: 105x88mm Mounting: 88x70mm Ø=6 deep: 26.5mm note: these end-bells are basic protection covers for transformers. Slight imperfections in the finish may occur.

€3.95 *

Remember Part Number: TFC-105

TFC-105-V Trafohaube für Blech EI105, schwarz

End bell for lamination 4 1/8", black

End bell for cover for vertical transformers with 3,75" lamination. Size: 105x88mm Mounting: 88x70mm Ø=6 deep: 26.5mm note: these end-bells are basic protection covers for transformers. Slight imperfections in the finish may occur.

€3.74 *

Remember Part Number: TFC-105-V

TFC-114 Trafohaube für Blech EI114, schwarz

End bell for lamination 4,5", black

End bell for upper cover for lay down transformers with 4,5" lamination like 561141, 561161, M9005P etc. Size: 114x95mm Mounting: 95x76mm Ø=7 deep: 33mm note: these end-bells are basic protection covers for transformers. Slight...

€3.74 *

Remember Part Number: TFC-114

End bell for lamination EI120, silver-zinc finish

transformer end bell for EI120 lamination, for Drop-Through mounting Supplied without transformer and fixing materials mounting: 100mm x 80mm inner dimensions: l x w: bottom: 90mm x 75mm top: 77mm x 66mm depth: 33mm

€13.70 *

Remember Part Number: TFC-120

TFC-84 Trafohaube für Blech EI84, schwarz

End bell for lamination EI84 = 3 11/36", black

End bell for upper cover for lay down transformers with EI84 = 3 11/36" lamination Size: 86x72 mm Mounting: 72x57mm Ø=5 deep: 23mm note: these end-bells are basic protection covers for transformers. Slight imperfections in the finish may...

€3.95 *