window.ga=window.ga||function(){(ga.q=ga.q||[]).push(arguments)};ga.l=+new Date; ga('create', 'UA-177780411-1', 'auto'); ga('set', 'forceSSL', true); ga('set', 'anonymizeIp', true); ga('require', 'displayfeatures'); ga('require', 'cleanUrlTracker'); ga('require', 'outboundLinkTracker'); ga('require', 'ec'); ga('send', 'pageview'); ga('set', 'nonInteraction', true); setTimeout("ga('send', 'event', 'read', '20 seconds')", 20000); Amp Verstärkergriffe kaufen | Tube Amp Doctor

Amp Handles

Close filters
  •  
  •  
  •  
  •  
  •  
 
from to
1 From 2
No results were found for the filter!
Vox Amps
VH Verstärker-Griff für VOX®, schwarz, Diamond Muster
Amp handle for VOX® amps, black, w/ loops, diamond
black amp handle VOX style, fits VOX® for AC30, AC15, AC50 and many other amps includes authentic slotted screws and t-nuts for mounting. new Super Quality: approved tested load capacity 40kg !! total length: 190mm mounting loop hole...

€12.95 *
Remember Part Number: VH
Tube Amp Doctor GmbH
FGLBL AMPEG Leder Griff (Lederimitat), verstärkt, mit Beschlägen, schw
Ampeg Leather handle, raised w/loops, black
Ampeg Leather handle (artifical leather), raised w/loops, black length (flat): 22.5cm mounting: 16,8cm wide (max.): 2.8cm Thickness: (max in middle of handle ca. 8mm) Mountingcenter of brackets: 3.5cm

€16.80 *
Remember Part Number: FGLBL
Marshall Amplification PLC
B-MRV7-METAL B-Stock: Marshall Style Griffschale aus Metall, schwarz für Boxen
B-Stock: Marshall style metal handle, black for Cabinets
Article with traces of usage or installation, fully functional. Tested by TAD and with full warranty ! Marshall style Metal Recessed Cabinet Handle, 1pc. Dimensions: 10 13/16" x 6 3/8" Will fit a hole dimension of 4 3/4" x 9 5/16" NOTE:...

€14.40 * €20.11 *
Remember Part Number: B-MRV7-METAL
Tube Amp Doctor GmbH
FGLHD-B Schwarzer Kunstledergriff mit Beschlägen inkl. Einschlagmuttern u. Schrauben
Black leatherette handle incl. T-nuts and screws
Used by Mesa Boogie® and others. Super heavy duty!! Dimensions: distance between center mounting loops: 48mm and 192mm handle, flat dimensions: 210 x 30 x 10mm (l x w x h)

€15.80 *
Remember Part Number: FGLHD-B
Tube Amp Doctor GmbH
FGLHD Brauner Kunstledergriff mit Beschlägen inkl. Einschlagmuttern u. Schrauben
Brown leatherette handle incl. T-nuts and screws
Fits nicly with tweed covered cabinets, used by Mesa Boogie® and others. Super heavy duty!! Dimensions: distance between center mounting loops: 48mm and 192mm handle, flat dimensions: 210 x 30 x 10mm (l x w x h)

€15.80 *
Remember Part Number: FGLHD
Tube Amp Doctor GmbH
FGLHD-R Weinroter Kunstledergriff mit Beschlägen inkl. Einschlagmuttern u. Schrauben
Burgundy leatherette handle incl. T-nuts and screws
Used by Mesa Boogie® and others. Super heavy duty!! Dimensions: distance between center mounting loops: 48mm and 192mm handle, flat dimensions: 210 x 30 x 10mm (l x w x h)

€15.80 *
Remember Part Number: FGLHD-R
Tube Amp Doctor GmbH
FGLHD-C Cremeweißer Kunstledergriff mit Beschlägen inkl. Einschlagmuttern u. Schrauben
Cream white leatherette handle incl. T-nuts and screws
Used by Mesa Boogie® and others. Super heavy duty!! Dimensions: distance between center mounting loops: 48mm and 192mm handle, flat dimensions: 210 x 30 x 10mm (l x w x h)

€15.80 *
Remember Part Number: FGLHD-C
Spares for Fender
FGBL Strap Griff, schwarz, mit Beschlägen, 2 Schrauben,
Fender style Handle, black w/chrome ends, 2 screws
No longer available, replacement: FGBS (see similar products) Classic Fender Style amp handles! Use on your old Fender amp or on that new amp project! Fender® used this type handle since the early 60s and still uses them on many classic...

€13.90 *
Remember Part Number: FGBL
Fender Musical Instruments Corporation Inc.
099-0947-000 Fender® PURE VINTAGE  Verstärker-Griff, schwarz
Fender® black strap amp handle
Fender® PURE VINTAGE AMPLIFIER HANDLES (1-SCREW MOUNT) Many of Fender's Pure Vintage hardware and bridges are crafted where possible on the same tooling and machinery as our original-era Fender parts. Some of this original tooling has...

€21.80 *
Remember Part Number: 099-0947-000
Fender Musical Instruments Corporation Inc.
099-0948-000 Fender® PURE VINTAGE  Verstärker-Griff, schwarz, 4-Schrauben
Fender® PURE VINTAGE black strap amp handle, 4-screw type
Fender® PURE VINTAGE AMPLIFIER HANDLES (1-SCREW MOUNT) Many of Fender's Pure Vintage hardware and bridges are crafted where possible on the same tooling and machinery as our original-era Fender parts. Some of this original tooling has...

€19.19 *
Remember Part Number: 099-0948-000
Spares for Fender
FGBLR Griff, "Dogbone", für Fender®, schwarzer Gummigriff
Handle, black rubber, for Fender®, "Dogbone" style
these Dogbone handles are like the Fender® design used during the glory 1950s and early 1960s. now Fender primary uses them in BLACK for the Fender® Hot Rod Series, like the Deluxe, DeVille and the BLues Junior Mounting Hardware is included

€13.90 *
Remember Part Number: FGBLR
Spares for Fender
FGBR Griff, vintage Dogbone, Fender® style, braun
Handle, Fender "Dogbone" style, brown
the Fender Dogbone handles are the design used during the glory 1950s and early 1960s. primary used by Fender® 1959-63 and in the American Tube Series like Blues Deluxe, Blues Deville, Blues Junior etc. Mounting Hardware is included...

€13.90 *
Remember Part Number: FGBR
Fender Musical Instruments Corporation Inc.
FGLFL Leder Griff (Lederimitat), flach, mit Beschlägen, braun
leather handle (artificial leather), flat w/loops, brown
primary used for smaller Fender® Tweed Amps like the 5F1 Champ or the 5E3 Deluxe. length (flat): 22.5cm wide (max.): 2.8cm Thick: 5mm Mountingcenter of brackets: 3.5cm flat version, see picture for difference of the FGL

€13.90 *
Remember Part Number: FGLFL
Tube Amp Doctor GmbH
FGL Leder Griff (Lederimitat), verstärkt, mit Beschlägen, braun
Leather handle (artificial leather), raised w/loops, brown
primary used for larger Fender® Tweed Amps like 5F6 Bassman or 5E8 Twin length (flat): 22.5cm wide (max.): 2.8cm Thickness: (max in middle of handle ca. 8mm) Mountingcenter of brackets: 3.5cm

€13.90 *
Remember Part Number: FGL
Tube Amp Doctor GmbH
FGLHD-LB Hellbrauner Kunstledergriff mit Beschlägen inkl. Einschlagmuttern u. Schrauben
Light-brown white leatherette handle incl. T-nuts and screws
Fits nicly with tweed covered cabinets, used by Mesa Boogie® and others. Super heavy duty!! Dimensions: distance between center mounting loops: 48mm and 192mm handle, flat dimensions: 210 x 30 x 10mm (l x w x h)

€15.80 *
Remember Part Number: FGLHD-LB
Tube Amp Doctor GmbH
MHS Marshall / Hiwatt Style Strap Griff, schwarz mit Chrome Beschlägen
Marshall / Hiwatt Style Strap handle, black with Chrome caps
Strap handle vintage Marshall + Hiwatt style, black with Chrome caps for mounting 4 each of screws + nuts are required (not included): screws HR3190 T-nuts HR3181

€19.90 *
Remember Part Number: MHS
Marshall Amplification PLC
MRV15 Marshall Ampplatte für 1960A
Marshall Amprubberplate for 1960A
Marshall anti-skid tray, rubberpad-ampplate for Cabinets like 1960A. size : 76 x 254 mm

€12.95 *
Remember Part Number: MRV15
Marshall Amplification PLC
MRV7 Marshall Griffschale, schwarz für  Boxen
Marshall handle, black for Cabinets
Marshall handle for Cabinets like 1960A/B, 1982A/B, 1936 etc. includes mounting screws

€16.90 *
Remember Part Number: MRV7
Marshall Amplification PLC
MRV18 Marshall Griff, Modern, mit Plastik Kappen
Marshall handle, modern for heads and combos
original Marshall handle for all JCM2000, JCM800 and JCM900 heads. The big black one...

€11.50 *
Remember Part Number: MRV18
Marshall Amplification PLC
MRV7-METAL Marshall Style Griffschale aus Metall, schwarz für Boxen
Marshall style metal handle, black for Cabinets
Marshall style Metal Recessed Cabinet Handle, 1pc. Dimensions: 10 13/16" x 6 3/8" Will fit a hole dimension of 4 3/4" x 9 5/16" NOTE: Some 1960A and 1960B cabs may require you to enlarge the cutout for this handle to fit.

€16.90 *
Remember Part Number: MRV7-METAL
Tube Amp Doctor GmbH
MHG Marshall Style Griff, schwarz mit GOLD-Beschlägen
Marshall Style Strap handle, black with Gold ends
Strap handle vintage Marshall + Hiwatt style, black with GOLD finished end caps for mounting 4 each of screws + nuts are required (not included): screws HR3190 T-nuts HR3181 distance of inner holes: 23 cm distance of outer holes: 25,5 cm

€19.90 *
Remember Part Number: MHG
Tube Amp Doctor GmbH
MH-SAS Screw assembly set for Marshall Style Handles (MHS + MHG)
Screw assembly set for Marshall Style Handles (MHS + MHG)
Screw assembly set for Marshall Style Handles (MHS + MHG) 2x T-nut M4 2x Screw M4 2x Woodscrew

€3.99 *
Remember Part Number: MH-SAS
Spares for Fender
FGBL2 Strap Griff für Fender®, schwarz, 4 Schrauben
Strap Handle for Fender®, black w/chrome ends, 4 screw
includes hardware, screws and t-nuts primary used by Fender® in some models since the 1980s dimensions: length (without end caps): 23.4cm wide: 2.5cm Screws: M4x25 distance between mounting-long-holes, meassured flat: 18.8-21.4cm

€13.90 *
Remember Part Number: FGBL2
Tube Amp Doctor GmbH
FGBS-B Strap Griff, schwarz, mit schwarzen Beschlägen
Universal Handle, black w/ black ends
Universal Black Strap includes black ends. with metal insert reinforcing handle dimensions: length (without end caps): 23.4cm wide: 2.5cm distance between mounting-long-holes, meassured flat: 18.8-21.4cm

€13.90 *
Remember Part Number: FGBS-B
1 From 2
Viewed