RCA/Cinch Jack for vintage Fender Footswitch, Reverb

Preview: Z-RJ RCA/Cinch Einbaubuchse für Fender Fußschalter, Reverb

Z-RJ RCA/Cinch Einbaubuchse für Fender Fußschalter, Reverb

€4.40 *

In Stock, delivery time approx.1-4 working days (Within Germany)
The delivery times for shipping abroad can be found here.

Part Number: Z-RJ
Packaging Size: 2x0.6x2 cm
Packaging Weight: 0.008 kg
UPC: 4251594916161

Panelmount jack with the speical size fitting the classic blackface or silverface Fender... more

Close menu

Product information "RCA/Cinch Jack for vintage Fender Footswitch, Reverb"

Panelmount jack with the speical size fitting the classic blackface or silverface Fender Back-Panels and for the TAD Blackface Amp-Kits.

used for the footswitch and reverb cable connection.

Original Switchcraft!

Supply content:

suitable lock washers please see "similar products" below

Safety information...

Responsible person for the EU

Economic operator established in the EU, who ensures that the product complies with the required regulations:

Tube Amp Doctor Musikhandels GmbH

Weinbrennerstr. 1

67551 Worms

shop@tubeampdoctor.com

www.tubeampdoctor.com

Warning:

Improper assembly, installation or use can lead to a loss of operational safety where the component is used, damage to the product, plus leading to an increased risk of serious or life-threatening injuries!

Read, write and discuss reviews... more

Close menu

Customer evaluation for "RCA/Cinch Jack for vintage Fender Footswitch, Reverb"

Write an evaluation

Please verify your testimonial by clicking on the link sent to your email after submitting your text.

Combination Spanner, 1/2"

€5.11 *

HR9260 Zahnscheibe für Potentiometer mit 3/8" Gewinde

Internal Lock Washer for potentiometer with 3/8" bushing

€0.50 *

CO12A SWITCHCRAFT #12A Klinkenbuchse mono 6,3 mm, Metall

SWITCHCRAFT #12A 1/4" Mono Phone Jack

€3.80 *

FPLA Lampenfassung für Fender Pilot Light

Lamp holder assembly for Fender Pilot Light Jewels

€7.50 *

RV-4AB3C1B 4AB3C1B TAD Hallspirale 2x2 Federn

4AB3C1B TAD Reverb Can 2x2 Springs

€32.50 *

HR9250 Unterlegscheibe mit Zahnung und zwei Bohrungen

Terminal Solder Lockwasher Lugs

€0.50 *

HR3121 MUTTER mit Zahnscheibe für FCSC + HR3050 + HR3120

NUT: Kep Nut for Chassis Strap Bolt + Speaker Screw

€0.60 *

S8C-1 Oktalfassung, Keramik, Lötösen, einteilig mit Montageflansch

Octal socket, Ceramic, solder lugs, one-piece with fixed mounting...

€1.95 *

Reverb Drive Transformer, Fender®, Boogie®

€39.90 *

Reverbcable-Set, 150 cm

€12.80 *

K-ACPRV Amp Chassis für Blackface Princeton Rev. Style AA1164

Amp Chassis for Blackface Princeton Rev. Style AA1164

€59.95 *

FPLR ROTE Linse ''Fender Pilot Light'', mit Facettenschliff

RED pilot light lens, jeweled

€3.50 *

FCSC Chassis Schraube, vernickelt, 80 mm

Chassis Strap Bolt, nickel, 80 mm

€1.95 *

TC Tube Clamp/retainer für Oktalfassung-Röhren (6L6GC, EL34)

Tube clamp/retainer for Octal-Base tubes (6L6GC/EL34)

€1.59 *

V-2525 25uF @ 25V Elektrolytkondensator, axial, 105°C, 13mm x 6.5mm

25uF @ 25V axial capacitor, 105°C, 13mm x 6.5mm

€0.79 *

S9CSK-BT VT9-ST-C Belton Novalsockel, Lötösen für chassis mount

VT9-ST-C Belton Noval socket, solder lugs with skirt

€1.99 *

FFH Sicherungshalter für Fender Amps1960er-1980er

Fuse-Holder (Fender style of 1960s - 80s)

€4.97 *

FCS4 Chassis Strap (4''''), für Fender Deluxe® Reverb, Princeton® Reverb

Chassis Strap (4''), for Fender Deluxe® Reverb, Princeton® Reverb

€6.90 *

A1M LOG ALPHA Pot

€2.75 *

SW1070 Carling 1x AUS tropfenförmiger Metallhebel

Carling 110-63 SPST, 2 position toggle switch

€8.90 *

FKBL Fender Style Potiknopf, Black & chrome mit Ziffern 1-10,

Fender Style Amp-Knob, Black & chrome "1-10", single

€3.42 *

S9SH-50-BT Abschirmhülse für Novalsockel, Belton, l=50mm

Belton Tube shield, for noval socket, l=50mm

€1.40 *

V-50100 TAD Gold Cap 50uF @ 100V Elektrolytkondensator, axial

TAD Gold Cap 50uF @ 100V electrolytic capacitor

€1.75 *

B250k LIN ALPHA Pots

€2.75 *

V-40-3X20500R 40uF+3x20uF 500V 40x50mm Schellenmontage

40uF+3x20uF 500V 40x50mm clamp mount

€17.90 *

V-RI40 Ringschelle für Elkomontage Ø = 40 mm, einteilig

capacitor mounting clamp Ø = 40 mm

€1.95 *

Z-RPL RCA/Cinch Stecker für ältere Fender Fußschalter

RCA Plug, chrome, for older Fender Footswitch

€1.40 *

CO11 SWITCHCRAFT #11 Klinkenbuchse 6,3mm ( 1/4") Metall, offen, mono

SWITCHCRAFT #11 1/4" (6,3mm) Metal Phone Jack, open, mono

€3.40 *

V-22500 Elko 22uF @ 500V axial, 16x32mm Elektrolytkondensator 105°C

22uF @ 500V 16x32mm axial capacitor 105°C

€2.89 *

HR9010 Gummitülle, Kabeldurchführung d=10mm

Rubber grommet for TAD Chassis, 10mm

€0.80 *

FKW Fender® Style Barrel Knopf, cream-weiß mit Madenschraube

Fender® Style Cream barrel amp knob with set-screw

€3.50 *

125C1A Siebdrossel 4H, 90 Ohm, für Fender®, Boogie®

Choke 4H, 90 Ohm, for Fender®, Boogie®

€39.95 *

CO12A-L SWITCHCRAFT #12A-L Klinkenbuchse 6,3 mm, Metall, langes Gewinde

SWITCHCRAFT #12A-L 1/4" Phone Jack, with long bushing

€4.40 *

Carbon Composition Resistor

From €0.73 *

CO12B SWITCHCRAFT #12B Klinkenbuchse 6,3 mm, Stereo, Metall

SWITCHCRAFT #12B 1/4" Phone Jack, Stereo

€4.40 *

S9CS Novalfassung, Keramik, mit Kragen und Abschirmhülse

Noval socket, Ceramic, with skirt and shield

€1.59 *

Hole Plug 18,5mm

€0.60 *

K-FBTR Eyeletboard für Bias Rectifier (Super Reverb, Pro Reverb etc.)

Eyeletboard for Bias rectifier (Super Reverb, Pro Reverb)

€8.00 *

CO226 Winkel-Klinkenstecker, mono, retro, Metall, 6,3 mm

1/4" Metal Phone Plug, mono, classic design, right angle

€2.90 *

mounting clamp Ø = 35 mm

€1.49 *

V-47500 TAD Gold Cap 47uF @ 500V Elektrolytkondensator, axial

TAD Gold Cap 47uF @ 500V electrolytic capacitor

€5.90 *

K-ACPRV-RP Rückpanel: Princeton Rev Style Amp Kit K-ACPRV

Rearpanel: Princeton Rev Style Amp Kit K-ACPRV -generic-

€30.50 *

SWITCHCRAFT #12A 1/4" Mono Phone Jack

€3.80 *

4AB3C1B TAD Reverb Can 2x2 Springs

€32.50 *

RCA Plug, chrome, for older Fender Footswitch

€1.40 *

Lamp holder assembly for Fender Pilot Light Jewels

€7.50 *

Reverb Drive Transformer, Fender®, Boogie®

€39.90 *

Fender Style Amp-Knob, Black & chrome "1-10", single

€3.42 *

Amp Chassis for Blackface Princeton Rev. Style AA1164

€59.95 *

NUT: Kep Nut for Chassis Strap Bolt + Speaker Screw

€0.60 *

SWITCHCRAFT #11 1/4" (6,3mm) Metal Phone Jack, open, mono

€3.40 *

RED pilot light lens, jeweled

€3.50 *

Chassis Strap Bolt, nickel, 80 mm

€1.95 *

Fuse-Holder (Fender style of 1960s - 80s)

€4.97 *

VT9-ST-C Belton Noval socket, solder lugs with skirt

€1.99 *

Octal socket, Ceramic, solder lugs, one-piece with fixed mounting...

€1.95 *

Terminal Solder Lockwasher Lugs

€0.50 *

Carling 110-63 SPST, 2 position toggle switch

€8.90 *

Chassis Strap (4''), for Fender Deluxe® Reverb, Princeton® Reverb

€6.90 *

TAD Gold Cap 50uF @ 100V electrolytic capacitor

€1.75 *

Reverbcable-Set, 150 cm

€12.80 *

125P1B Netztrafo für Fender Princeton Reverb Amp, Champ, Vibro Champ (CBS Modelle)

Mains Transf. for Fender Princeton Reverb Amp, Champ, Vibrochamp...

€129.00 *

Choke 4H, 90 Ohm, for Fender®, Boogie®

€39.95 *

125A1A Ausgangsübertager für Fender Deluxe Reverb, Princeton Reverb

Output transf. for Fender Deluxe Reverb, Princeton Reverb

€86.20 *

Power switch

€12.74 *

Faceplate: Princeton Rev Style AA1164 Amp Kit

€32.00 *

Reverbcable-Set, short

€24.80 *

22uF @ 500V 16x32mm axial capacitor 105°C

€2.89 *

Tube clamp/retainer for Octal-Base tubes (6L6GC/EL34)

€1.59 *

25uF @ 25V axial capacitor, 105°C, 13mm x 6.5mm

€0.79 *

Internal Lock Washer for potentiometer with 3/8" bushing

€0.50 *

40uF+3x20uF 500V 40x50mm clamp mount

€17.90 *

Belton Tube shield, for noval socket, l=50mm

€1.40 *

V-2525BP 25uF @ 25V 10x19mm BIPOLAR Elektrolytkondensator,

25uF @ 25V 10x19mm BIPOLAR axial capacitor

€1.69 *

Rearpanel: Princeton Rev Style Amp Kit K-ACPRV -generic-

€30.50 *

Schuko- AC-Cord, 10ft, black

€7.90 *

Eyeletboard for Bias rectifier (Super Reverb, Pro Reverb)

€8.00 *

A1M LOG ALPHA Pot

€2.75 *

FRB Reverb Bag / Schutzhülle (42,5 cm) für Hallspirale

Reverb-Bag (42,5 cm) for reverb cans

€16.49 *

K-FBPR Eyeletboard für Blackface Princeton Reverb Style AA1164

Eyeletboard use for Blackface Princeton Reverb AA1164 circuit

€23.50 *

Rubber grommet for TAD Chassis, 10mm

€0.80 *

Push-back-wire (solid): green, 1m

€3.45 *