Internal Lock Washer for potentiometer with 3/8" bushing

HR9260 Zahnscheibe für Potentiometer mit 3/8" Gewinde

€0.50 *

In Stock, delivery time approx.1-4 working days (Within Germany)
The delivery times for shipping abroad can be found here.

Part Number: HR9260
Packaging Size: 1.8x0.1x1.8 cm
Packaging Weight: 0.001 kg
UPC: 4251594911944

Internal Lock Washer for potentiometer with 3/8" bushing like our Z-A1M etc. See "matching... more

Close menu

Product information "Internal Lock Washer for potentiometer with 3/8" bushing"

Internal Lock Washer for potentiometer with 3/8" bushing like our Z-A1M etc. See "matching products"

perfect for Switchcraft jacks 1/4" like the CO11 and CO12A also

Safety information...

Responsible person for the EU

Economic operator established in the EU, who ensures that the product complies with the required regulations:

Tube Amp Doctor Musikhandels GmbH

Weinbrennerstr. 1

67551 Worms

shop@tubeampdoctor.com

www.tubeampdoctor.com

Warning:

Improper assembly, installation or use can lead to a loss of operational safety where the component is used, damage to the product, plus leading to an increased risk of serious or life-threatening injuries!

Read, write and discuss reviews... more

Close menu

Customer evaluation for "Internal Lock Washer for potentiometer with 3/8" bushing"

Write an evaluation

Please verify your testimonial by clicking on the link sent to your email after submitting your text.

CO1090 Klinkenbuchse 6,3 mm, stereo, Print, Switchcraft Style 114B

1/4"Phone Jack Jack, plastic, stereo, Switchcraft Style 114B

€1.98 *

CO11 SWITCHCRAFT #11 Klinkenbuchse 6,3mm ( 1/4") Metall, offen, mono

SWITCHCRAFT #11 1/4" (6,3mm) Metal Phone Jack, open, mono

€3.40 *

CO12A SWITCHCRAFT #12A Klinkenbuchse mono 6,3 mm, Metall

SWITCHCRAFT #12A 1/4" Mono Phone Jack

€3.80 *

A1M LOG ALPHA Pot

€2.75 *

Jack plate for 1/4" phone jack ferrule

€2.00 *

SWITCHCRAFT #12A 1/4" Mono Phone Jack

€3.80 *

Carbon Composition Resistor

From €0.73 *

HR9250 Unterlegscheibe mit Zahnung und zwei Bohrungen

Terminal Solder Lockwasher Lugs

€0.50 *

SWITCHCRAFT #11 1/4" (6,3mm) Metal Phone Jack, open, mono

€3.40 *

HR9263 Mutter für Potentiometer mit 3/8" Gewinde

Nut for potentiometer with 3/8" bushing

€0.50 *

HR3121 MUTTER mit Zahnscheibe für FCSC + HR3050 + HR3120

NUT: Kep Nut for Chassis Strap Bolt + Speaker Screw

€0.60 *

FPLA Lampenfassung für Fender Pilot Light

Lamp holder assembly for Fender Pilot Light Jewels

€7.50 *

FPLR ROTE Linse ''Fender Pilot Light'', mit Facettenschliff

RED pilot light lens, jeweled

€3.50 *

HR3140 SCHRAUBE für Novalfassungen, passend zu Mutter HR3141

SCREW for 9-pin sockets, fits to nut HR3141

€0.40 *

Push-back-wire (solid): yellow, 1m

€3.20 *

FKBL Fender Style Potiknopf, Black & chrome mit Ziffern 1-10,

Fender Style Amp-Knob, Black & chrome "1-10", single

€3.42 *

Push-back-wire (solid): green, 1m

€3.45 *

HR3141 MUTTER mit Zahnscheibe für Novalfassungen, passend

NUT: kep nut for 9-pin sockets, fits to screw HR31

€0.60 *

A1M LOG ALPHA Pot

€2.75 *

HR3131 MUTTER mit Zahnscheibe für HR3130+HR3060

NUT: Kep Nut for Screws HR3130+HR3060

€0.60 *

FFH Sicherungshalter für Fender Amps1960er-1980er

Fuse-Holder (Fender style of 1960s - 80s)

€4.97 *

Z-RJ RCA/Cinch Einbaubuchse für Fender Fußschalter, Reverb

RCA/Cinch Jack for vintage Fender Footswitch, Reverb

€4.40 *

V-22500 Elko 22uF @ 500V axial, 16x32mm Elektrolytkondensator 105°C

22uF @ 500V 16x32mm axial capacitor 105°C

€2.89 *

HR3130 SCHRAUBE für Oktalfassungen, Boards, Kondensatorschellen, passend zu Mutter HR3131

SCREW for 8-pin sockets, fiberboards, cap clamps, fits to nut HR3131

€0.40 *

Push-back-wire (solid): red, 1m

€3.20 *

HR9010 Gummitülle, Kabeldurchführung d=10mm

Rubber grommet for TAD Chassis, 10mm

€0.80 *

HR9262 Unterlagsscheibe für Potentiometer mit 3/8" Gewinde

Washer for potentiometer with 3/8" bushing

€0.50 *

HR9264 Zahnscheibe für Lampenfassung mit 1/2" Gewinde

Internal Lock Washer for Lamp Holder with 1/2" bushing

€0.50 *

S9CSK-BT VT9-ST-C Belton Novalsockel, Lötösen für chassis mount

VT9-ST-C Belton Noval socket, solder lugs with skirt

€1.99 *

Lamp for FPLA, 6.3V, bayonet

€1.25 *

V-2525BP 25uF @ 25V 10x19mm BIPOLAR Elektrolytkondensator,

25uF @ 25V 10x19mm BIPOLAR axial capacitor

€1.69 *

V-16475 16uF @ 475V 12x30mm Elektrolytkondensator, axial, 105°C

16uF @ 475V 12x30mm electrolytic capacitor, axial, 105°C

€2.34 *

S8C-1 Oktalfassung, Keramik, Lötösen, einteilig mit Montageflansch

Octal socket, Ceramic, solder lugs, one-piece with fixed mounting...

€1.95 *

TC Tube Clamp/retainer für Oktalfassung-Röhren (6L6GC, EL34)

Tube clamp/retainer for Octal-Base tubes (6L6GC/EL34)

€1.59 *

Schuko- AC-Cord, 10ft, black

€7.90 *

Strain Relief

€1.18 *

SW1070 Carling 1x AUS tropfenförmiger Metallhebel

Carling 110-63 SPST, 2 position toggle switch

€8.90 *

RV-4AB3C1B 4AB3C1B TAD Hallspirale 2x2 Federn

4AB3C1B TAD Reverb Can 2x2 Springs

€32.50 *

White wire clamp

€0.50 *

FCSC Chassis Schraube, vernickelt, 80 mm

Chassis Strap Bolt, nickel, 80 mm

€1.95 *

CTS-D-A1M CTS 1M LOG Custom Dimple Potentiometer, glatte 6.3mm Achse, 24mm

A1M LOG CTS Dimple Potentiometer

€6.95 *

V-2525 25uF @ 25V Elektrolytkondensator, axial, 105°C, 13mm x 6.5mm

25uF @ 25V axial capacitor, 105°C, 13mm x 6.5mm

€0.79 *

CB3025 Push-back-wire (solid): Schwarz, 1m

Push-back-wire (solid): Black, 1m

€3.20 *

Z-R470.5W Drahtwiderstand 470 Ohm/5W, 5%

Resistor 470 Ohm/5W, 5%

€1.50 *

HR3120 SCHRAUBE für Trafomontage, passend zu HR3121

SCREW for transformer mounting, fitting HR3121

€0.40 *

SWITCHCRAFT #12A 1/4" Mono Phone Jack

€3.80 *

NUT: Kep Nut for Chassis Strap Bolt + Speaker Screw

€0.60 *

NUT: Kep Nut for Screws HR3130+HR3060

€0.60 *

SWITCHCRAFT #11 1/4" (6,3mm) Metal Phone Jack, open, mono

€3.40 *

SCREW for 8-pin sockets, fiberboards, cap clamps, fits to nut HR3131

€0.40 *

Terminal Solder Lockwasher Lugs

€0.50 *

NUT: kep nut for 9-pin sockets, fits to screw HR31

€0.60 *

SCREW for 9-pin sockets, fits to nut HR3141

€0.40 *

A1M LOG ALPHA Pot

€2.75 *

Fender Style Amp-Knob, Black & chrome "1-10", single

€3.42 *

Lamp holder assembly for Fender Pilot Light Jewels

€7.50 *

Nut for potentiometer with 3/8" bushing

€0.50 *

White wire clamp

€0.50 *

HR3040 Schraube 3/4'''' (1.9cm) für Fender Ecken + Griffe

Screw 3/4'' (1,9 cm), for Fender chrome corners +handles

€0.90 *

FKP Pointerknob (chicken head), black für Fender Amps

Pointerknob (chicken head), black for Fender Amps

€2.59 *

25uF @ 25V 10x19mm BIPOLAR axial capacitor

€1.69 *

V-47500 TAD Gold Cap 47uF @ 500V Elektrolytkondensator, axial

TAD Gold Cap 47uF @ 500V electrolytic capacitor

€5.90 *

Strain Relief

€1.18 *

RCA/Cinch Jack for vintage Fender Footswitch, Reverb

€4.40 *

Internal Lock Washer for Lamp Holder with 1/2" bushing

€0.50 *

Z-EYELET Hohlniete / Eyelet für Fiberboards (Lötösen)

Eyelet for DIY projects or modifications of Fender style fiberboards

From €0.18 *

SCREW for transformer mounting, fitting HR3121

€0.40 *

HR3111 MUTTER: Mutter für Chassis Schraube f. TWEED AMP

HEX-NUT: Nut for TWEED AMP Chassis screw

€0.60 *

Chassis Strap Bolt, nickel, 80 mm

€1.95 *

22uF @ 500V 16x32mm axial capacitor 105°C

€2.89 *

Push-back-wire (solid): yellow, 1m

€3.20 *

V-5050500R 50+50uF 500V Elektrolytkondensator, radial 35x75mm

50+50uF 500V electrolytic capacitor, radial 35x75mm

€9.65 *

Washer for potentiometer with 3/8" bushing

€0.50 *

Octal socket, Ceramic, solder lugs, one-piece with fixed mounting...

€1.95 *

Rubber grommet for TAD Chassis, 10mm

€0.80 *

Fuse-Holder (Fender style of 1960s - 80s)

€4.97 *

S9CS Novalfassung, Keramik, mit Kragen und Abschirmhülse

Noval socket, Ceramic, with skirt and shield

€1.59 *

25uF @ 25V axial capacitor, 105°C, 13mm x 6.5mm

€0.79 *

4AB3C1B TAD Reverb Can 2x2 Springs

€32.50 *

POT-FT Wah-Wah Potentiometer 100K , für Dunlop Cry Baby + Vox Wah

Wah pot 100K, fits Fulltone Clyde Wah, Dunlop Cry Baby

€11.80 *

Jack plate for 1/4" phone jack ferrule

€2.00 *

HR3110 SCHRAUBE: Chassis Schraube für TWEED AMPS

SCREW: TWEED AMP Chassis screw

€2.50 *

HR3060 SCHRAUBE: Bronze-Schraube für TWEED AMP Schallwand

SCREW: Bronze for Baffle mounting at TWEED AMPS

€1.79 *

B250k LIN ALPHA Pots

€2.75 *

V-8475 8uF @ 475V 13x25mm Elektrolytkondensator, axial, 105°C

8uF @ 475V 13x25mm electrolytic capacitor, axial, 105°C

€2.18 *