No results were found for the filter!

gold plated knurled locknut with shoulder. Deep Thread Round Nut for Switchcraft 3-Way Toggle switch, gold plated Used on certain models of Gibson® guitars with gold hardware and other brands where the threading of the switch isn't able...
Remember
Part Number: HR4007

knurled locknut with shoulder. Deep Thread Round Nut for Switchcraft 3-Way Toggle switch, nickel Used on various models of Gibson® guitars and other brands where the threading of the switch isn't able to project from the body enough....
Remember
Part Number: HR4000

Panelmount jack with the speical size fitting the classic blackface or silverface Fender Back-Panels and for the TAD Blackface Amp-Kits. used for the footswitch and reverb cable connection. Original Switchcraft! Supply content: suitable...
Remember
Part Number: Z-RJ

SWITCHCRAFT 14B 6.3mm Stereo 3 Conductor Jack w/Nut & Washer, Double Closed shorting Circuit Litte Jax series metal, stereo, shorting, 3/8" bushing, includes nut & washer manufactured in USA used by Fender: Footswitch jack Prosonic...
Remember
Part Number: CO14B

SWITCHCRAFT SIDE SWITCH double pole - triple throw DPTT, black as used with Fender© Mustang© oder Duosonic© black knob, nickle plate solder lugs mounting hole center distance: 35.7mm (1.406") Made in Chicago, IL, USA
Remember
Part Number: SC-11D1049X

SWITCHCRAFT SIDE SWITCH double pole - triple throw DPTT, red as used with Fender© Mustang© oder Duosonic© red knob, nickle plate solder lugs mounting hole center distance: 35.7mm (1.406") Made in Chicago, IL, USA
Remember
Part Number: SC-11D1049X-R

SWITCHCRAFT SIDE SWITCH double pole - triple throw DPTT, white as used with Fender© Mustang© oder Duosonic© white knob, nickle plate solder lugs mounting hole center distance: 35.7mm (1.406") Made in Chicago, IL, USA
Remember
Part Number: SC-11D1049X-W

SWITCHCRAFT SLIDE SWITCH white, DPDT Made in Chicago, IL, USA SWITCH RATING: 3 AMP, 125 V.A.C., 0.5 AMP, 125 V.D.C. comes with 3.55mm mounting holes, no screw threads
Remember
Part Number: SW2022

the original SWITCHCRAFT (USA) phone jack. with sturdy contacts, insulating washers and original US bushing (matching nuts is included). the standard open phone jack since decades.
Remember
Part Number: CO11
Hint!

SWITCHCRAFT 1/4" Phone Jack, metal, mono, shorting, 3/8" bushing This jack was and still is the standard in guitar amps in the US! Still in use by Fender and many others! Recommended for most older Fedner amps. Also used in the TAD Tweed...
Remember
Part Number: CO12A

SWITCHCRAFT 1/4" Phone Jack L12A, with extra long bushing (9,00mm / 0.375") identical withj Swichcraft L11 if shorting contact is not connected
Remember
Part Number: CO12A-L

SWITCHCRAFT 6.3mm / 1/4" Stereo 3 Conductor Jack w/Nut & Washer, 7,0mm / .276" Bushing, Double Open Circuit metal, stereo, 3/8" bushing often used as INPUT on quality stomp boxes US-MADE Picture 4 shows the difference in length between...
Remember
Part Number: CO12B

metal, mono, switching, 3/8" bushing used for impedance switching in Fender Amps like Prosonic etc.
Remember
Part Number: CO13A

Switchcraft #152B 1/4" Stereo 3 Conductor Thick Panel Mount Jack w/Cable Clamp Nickel Finish, Nut + Washer can be used mono as well Since decades the original stock part of many US made guitar classics. made in USA (also known as p/n...
Remember
Part Number: SC-152B

Switchcraft #155 1/4" Stereo Long Threaded Jack 3 Conductor Thick Panel Mount Jack without cable clamp, Black Satin Finish, Nut + Washer can be used mono as well Since decades the original stock part of many US made guitar classics. made...
Remember
Part Number: SC-155

Switchcraft Type 226 1/4" plug - 1/4" Mono 2 Conductor RIGHT ANGLE Plug, Nickel Metal Handle w/Solder Lugs & Cable Clamp the music industry standard instrument cable plug since the 1950s. still the benchmark, still made in Chicago, IL,...
Remember
Part Number: SC-226

Switchcraft Type 228 1/4" plug - 1/4" Mono 2 Conductor RIGHT ANGLE Plug, flat version Nickel Metal Handle w/Solder Lugs & Cable Clamp ¼" Mono 2-Conductor right angle plug, flat version Solder Lugs & Cable Clamp Switchcraft Heavy duty...
Remember
Part Number: SC-228

Switchcraft #332AX Old Style MC1M Microphone Connector To 1/4" 2 Conductor Phone Jack used to connect old style microphones like Astatic JT30, Turner, Shure, RCA with standard guitar cord. typically used with high-Z bullet microphones by...
Remember
Part Number: SC-332AX

SWITCHCRAFT 6.3mm / 1/4" Stereo 3 Conductor Jack w/Nut & Washer, 9,6mm / .38" Long Bushing, Double Open Circuit metal, stereo, 3/8" bushing often used as INPUT on quality stomp boxes US-MADE Picture 4 shows the difference in length...
Remember
Part Number: CO12B-L

Switchcraft Type 280 1/4" plug - 1/4" Mono 2 Conductor Cable Mount Plug, Nickel Metal Handle w/Solder Lugs & Cable Clamp the music industry standard instrument cable plug since the 1950s.>7h2> still the benchmark, still made in Chicago,...
Remember
Part Number: SC-280

Switchcraft #151 1/4" Mono 2 Conductor Thick Panel Mount Jack w/Cable Clamp Nickel Finish, Nut + Washer Since decades the original stock part of many US made guitar classics. made in USA (also known as p/n EP0151)
Remember
Part Number: SC-151

Switchcraft #157 1/4" Stereo Thick Panel Mount Jack w/Cable Clamp Nickel Finish, Nut + Washer 1/4" STRAP NUT END-PIN JACKS offer the same trusted quality of a Switchcraft end-pin jack, plus the added functionality of a removable strap...
Remember
Part Number: SC-157

Switchcraft Type 380 1/4" plug - 1/4" SHORT Mono 2 Conductor Cable Mount Plug, Nickel Metal Handle w/Solder Lugs & Cable Clamp the cool short version with 1" handle piece (see p/n SC-280 for the long version) ¼" Mono 2-Conductor straight...
Remember
Part Number: SC-380

Switchcraft A3M A Series 3 Pin XLR Male Cable Mount, Silver Pins, Nickel, bulk the music industry microphone cable connector since the 1970s. still the benchmark, still made in Chicago, IL, USA CONSTRUCTION : Sturdy, die-cast zinc with...
Remember
Part Number: SC-A3F
Top seller
Viewed