window.ga=window.ga||function(){(ga.q=ga.q||[]).push(arguments)};ga.l=+new Date; ga('create', 'UA-177780411-1', 'auto'); ga('set', 'forceSSL', true); ga('set', 'anonymizeIp', true); ga('require', 'displayfeatures'); ga('require', 'cleanUrlTracker'); ga('require', 'outboundLinkTracker'); ga('require', 'ec'); ga('send', 'pageview'); ga('set', 'nonInteraction', true); setTimeout("ga('send', 'event', 'read', '20 seconds')", 20000); Amp Schrauben & Muttern kaufen | Tube Amp Doctor

Screws, nuts and bolts

Filter
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
 
from to
1 From 3
No results were found for the filter!
Tube Amp Doctor GmbH
HR9290 Käfigmutter für TAD Chassis (Plexi Kit) oder Mars
Cage-nut for TAD Aluminum Chassis or Marshall© Cha
Cage-nut for for TAD Aluminum Chassis z.B. K-ACM100WNH or Marshall© Chassis used in JMP, JCM800, JCM900 and others, M6/SQ9,5 one piece matching screw find here: HR9291

€0.90 *
Remember Part Number: HR9290
Mesa Boogie
Z-MB-HR002 Gehäuseschraube für Mesa Boogie Lonestar Classic Topteil (10/24 x 4 1/8)
casing screw for Mesa Boogie Lonestar Classic Head (10/24 x 4 1/8)
casing screw for Mesa Boogie Lonestar Classic Head (10/24 x 4 1/8)

€9.50 *
Details
Remember Part Number: Z-MB-HR002
Spares for Fender
FCSC Chassis Strap Bolt, nickel, 80 mm
Chassis Schraube, vernickelt, 80 mm
primary used by Fender® from 1960s to ca. 1975 and on all Fender Blackface Reissue models. matching hex-nut: HR3121 ca. ´75 on Fender used a shorter screw: see HR3050

€1.95 *
Remember Part Number: FCSC
Tube Amp Doctor GmbH
HR9322 Abstandshalter, Nylon, für Mesa Boogie, 22mm
Circuit board holder, plastic, 22mm, for Mesa Boogie
1 pc. Used for Turret boards mounting Top hole diameter 4.0 mm, panel thickness 1.5 mm Bottom hole diameter 4.75 mm, panel thickness 0.8-2.0 mm

From €0.88 *
Details
Remember Part Number: HR9322
Switchcraft, Inc.
HR4007 Deep Thread Round Nut for Switchcraft 3-Way Toggle switch, GOLD
Deep Thread Round Nut for Switchcraft 3-Way Toggle switch, GOLD
gold plated knurled locknut with shoulder. Deep Thread Round Nut for Switchcraft 3-Way Toggle switch, gold plated Used on certain models of Gibson® guitars with gold hardware and other brands where the threading of the switch isn't able...

€4.49 *
Remember Part Number: HR4007
Switchcraft, Inc.
HR4000 Tiefgewinde-Rundmutter für Switchcraft 3-Way Toggle-Schalter, nickel
Deep Thread Round Nut for Switchcraft 3-Way Toggle switch, nickel
knurled locknut with shoulder. Deep Thread Round Nut for Switchcraft 3-Way Toggle switch, nickel Used on various models of Gibson® guitars and other brands where the threading of the switch isn't able to project from the body enough....

€4.49 *
Remember Part Number: HR4000
Mojotone
HR3051 Fender Blackface Style baffle screw, 38mm lang.
Fender Blackface Style baffle screw, #8, 1 1/2"
Zinc plated oval head wood screw. Perfect for mounting Blackface and Silverface Fender style floating baffles. primary used by Fender® 1950 till today total length: 1 1/2" diameter: 0.164" head diameter: 0,312" thread: #8

€0.98 *
Remember Part Number: HR3051
Fender Musical Instruments Corporation Inc.
FHDK2 Fender® Rändel-Schrauben für Topteilbefestigung (2 Stk)
Fender® Piggyback Thumb Screws, 2 pcs
Piggyback Thumb Screws "Hold Down knobs" genuine Fender® since early 1960's package content: 2 pieces

€22.40 *
Remember Part Number: FHDK2
Tube Amp Doctor GmbH
HR3024 Unterlagsscheiben / Rosetten, Stahl, (12 Stück Packung)
Finishing "Tea Cup" Washer steel (12 pieces)
12pcs/1dz. finishing "Tea Cup" washers, german silver!, (set = 12 pieces) for early 60s vintage Fender amp back-panel screws typically used with blonde and brown tolex Fender amps 1960-1964 and the early black Tolex Fender amps and...

€3.95 *
Remember Part Number: HR3024
Tube Amp Doctor GmbH
HR3025 Unterlagsscheiben / Rosetten, Stahl, (12 Stück Packung)
Finishing Washer steel (12 pieces), for amplifier back-panel screws
12pcs finishing washers, steel/chrome, (set = 12 pieces) for back-panel screws typically used with black Tolex Fender amps since 1966 matching with Back-Panel screws: HR3030 and HR3035 D (outer)=11mm D (hole)= 4.5mm H=2.2mm

€3.95 *
Remember Part Number: HR3025
Tube Amp Doctor GmbH
HR3111 MUTTER: Mutter für Chassis Schraube f. TWEED AMP
HEX-NUT: Nut for TWEED AMP Chassis screw
HEX-NUT: for TWEED AMP Chassis screw matching screw find here: HR3110

€0.60 *
Remember Part Number: HR3111
Tube Amp Doctor GmbH
HR9264 Zahnscheibe für Lampenfassung mit 1/2" Gewinde
Internal Lock Washer for Lamp Holder with 1/2" bushing
Internal Lock Washer for Lamp Holder with 1/2" bushing like our FPLA, See "Similar products" lamp holder and nut not included

€0.50 *
Remember Part Number: HR9264
CTS Corporation
HR9260 Zahnscheibe für Potentiometer mit 3/8" Gewinde
Internal Lock Washer for potentiometer with 3/8" bushing
Internal Lock Washer for potentiometer with 3/8" bushing like our Z-A1M etc. See "matching products" perfect for Switchcraft jacks 1/4" like the CO11 and CO12A also

€0.50 *
Remember Part Number: HR9260
Tube Amp Doctor GmbH
HR3176 Schraube M5x20 für Lautsprechermontage in Marshall Boxen ab ca. 2004
M5x20 Screws for speaker mounting Marshall Cabinets from 2004 on
Screws for speaker mounting (Celestion, Jensen, Eminence etc.) Marshall Cabinets from 2004 on M5x20 (metric thread, 5mm diameter, 20mm lenght) fits Marshall cabinets 1960A, 1960B, 1960AX, 1960BX, 1960TV, 1936, 1933 and many others...

€0.25 *
Remember Part Number: HR3176
Tube Amp Doctor GmbH
HR3175 Schraube M5 x 25 für Lautsprechermontage in Marshall Boxen
M5x25 Screw for speaker mounting in Marshall Cabinets
Screws for speaker mounting (Celestion, Jensen, Eminence etc.) used in Marshall Cabinets up to 2004 For cabinets after 2004 please see item HR3176 M5x25 (metric 5mm diameter, 25mm lenght) fits Marshall cabinets 1960A, 1960B, 1982, 1936,...

€0.25 *
Details
Remember Part Number: HR3175
Marshall Amplification PLC
MRV14-10 Marshall Nieten, gold VPE = 10
Marshall Rivets, gold, 10pcs.
Marshall rivets for all Marshall Amps with handles or corners since JCM800 package containes 10pcs.

€2.95 *
Remember Part Number: MRV14-10
Marshall Amplification PLC
MESCRW00001 Marshall, CSK Schraube, M6x30 z.B. für JTM60 Combo, schwarz
Marshall Screw, CSK, M6x30, black, for JTM60
Marshall Screw, CSK, M6x30, black, for JTM60, JCM600, JCM900, JCM2000 -Series

€3.99 *
Remember Part Number: MESCRW00001
Marshall Amplification PLC
MESCRW00045 Marshall, Schraube, für Griffschale MRV7, gold
Marshall, screw for handle MRV7, gold
Marshall, screw for handle MRV7, gold

From €0.49 *
Details
Remember Part Number: MESCRW00045
Marshall Amplification PLC
MEWASH00001 Marshall, Unterlegscheibe M6, z.B. für JTM60 Combo, schwarz
Marshall, Washer M6, used for JTM60 Combo, black
Marshall, Washer M6, used for JVM Series like 410H and JTM60 Combo, black qty: 1 Diameter = 14.8mm, H= 2.8mm, hole= 7mm

€3.99 *
Details
Remember Part Number: MEWASH00001
Tube Amp Doctor GmbH
HR3160 Schrauben M3x6, schwarz, Pozidriv
Metric Black Pozidriv M/C Srews, M3x6
1 pc. Used for HR9270, HR9280

€0.60 *
Remember Part Number: HR3160
Tube Amp Doctor GmbH
HR3165 Schrauben M3x6, Messing vernickelt
Metric Pozidriv M/C Srews, M3x6, nickel plated brass
Metric Pozidriv M/C Srews, M3x6, nickel plated brass for SW2020 1 pc.

€0.60 *
Remember Part Number: HR3165
Tube Amp Doctor GmbH
HR3028 Montageschraube für Ledergriffe FGL/FGLFL und Kabelschellen in Fender Amps
mounting screw for leather handles FGL / FGLFL and wire clamps in...
primary used for Fender® amps as a mounitng screw for leather handles, FGL + FGLFL, Reverb Bags FRB + FRB-S and to mount wire clamps HR9100 sold per individual piece Design: Half round head, Pozidriv cross slot. Material: A 2 Surface...

€0.40 *
Remember Part Number: HR3028
CTS Corporation
HR9263 Mutter für Potentiometer mit 3/8" Gewinde
Nut for potentiometer with 3/8" bushing
Nut for potentiometer with 3/8" bushing like our Z-A1M etc. See "matching products" perfect for Switchcraft jacks 1/4" like the CO11 and CO12A also

€0.50 *
Remember Part Number: HR9263
Tube Amp Doctor GmbH
HR3141 MUTTER mit Zahnscheibe für Novalfassungen, passend
NUT: kep nut for 9-pin sockets, fits to screw HR31
NUT: kep nut for 9-pin sockets, fits to screw HR3140 inch thread d= aprox. 0.25mm primary used by Fender® 50s

€0.60 *
Remember Part Number: HR3141
1 From 3
Top seller
Tube Amp Doctor GmbH
HR3130 SCHRAUBE für Oktalfassungen, Boards, Kondensatorschellen, passend zu Mutter HR3131 SCREW for 8-pin sockets, fiberboards, cap clamps, fits to nut HR3131

€0.40 *
Tube Amp Doctor GmbH
HR3131 MUTTER mit Zahnscheibe für HR3130+HR3060 NUT: Kep Nut for Screws HR3130+HR3060

€0.60 *
Tube Amp Doctor GmbH
HR3121 MUTTER mit Zahnscheibe für FCSC + HR3050 + HR3120 NUT: Kep Nut for Chassis Strap Bolt + Speaker Screw

€0.60 *
CTS Corporation
HR9260 Zahnscheibe für Potentiometer mit 3/8" Gewinde Internal Lock Washer for potentiometer with 3/8" bushing

€0.50 *
Tube Amp Doctor GmbH
HR3040 Schraube 3/4'''' (1.12cm) für Fender Ecken + Griffe Screw 3/4'' (1,12 cm), for Fender chrome corners +

€0.90 *
Tube Amp Doctor GmbH
HR3140 SCHRAUBE für Novalfassungen, passend zu Mutter HR3141 SCREW for 9-pin sockets, fits to nut HR3141

€0.40 *
Tube Amp Doctor GmbH
HR3141 MUTTER mit Zahnscheibe für Novalfassungen, passend NUT: kep nut for 9-pin sockets, fits to screw HR31

€0.60 *
Tube Amp Doctor GmbH
HR3030 Schraube, 1,2''''(3 cm), (Fender Backpanel Screw) Screw, 1'' (3 cm), chrome (Fender Back-Panel Screw)

€0.60 *
Viewed
Functionalities

Functional cookies are absolutely necessary for the functionality of the webshop. These cookies assign a unique random ID to your browser to ensure your uninterrupted shopping experience across multiple page views.

Session:
The session cookie stores your shopping data over several page views and is therefore essential for your personal shopping experience.
Notepad:
The cookie enables a notepad to be made available to the user across sessions. This means that the notepad remains available even over several browser sessions.
Device Assignment:
The device assignment helps the shop to ensure the best possible display for the currently active display size.
CSRF-Token:
The CSRF token cookie contributes to your security. It strengthens the protection of forms against unwanted hacker attacks.
Login Token:
The Login Token is used for the recognition of users across sessions. The cookie does not contain any personal data, but allows personalisation over several browser sessions.
Cache exception:
The cache exception cookie allows users to read individual content independent of the cache memory.
Cookies Active Check:
The cookie is used by the website to determine whether cookies are allowed by the site user's browser.
Cookie settings:
The cookie is used to store the cookie settings of the site user over several browser sessions.
Information of origin:
The cookie stores the home page and the first page visited by the user for further use.
Cookie settings:
The cookie is used to store the cookie settings of the site user over several browser sessions.
PayPal:
Das Cookie wird für Zahlungsabwicklungen über PayPal genutzt.
Tracking

Tracking cookies help the shop operator to collect and evaluate information about the behaviour of users on their website.

Google Analytics:
Google Analytics is used for traffic analysis of the website. Statistics on website activity can be created and read out.
Matomo:
Das Cookie wird genutzt um Webseitenaktivitäten zu verfolgen. Die gesammelten Informationen werden zur Seitenanalyse und zur Erstellung von Statistiken verwendet.
This website uses cookies to ensure you get the best experience on our website.
  Imprint   Privacy