No results were found for the filter!
Amp Corner, black, pastic (VOX AC30, Orange)
black plastic amp corner like used with the VOX AC30® and many more VOX® amps from 1966 to 2004 and Orange® amplifier models since the 1960's till today.
Remember
Part Number: HR2050
Amp Corner, chrome/nickel plated, 2 screw version,
1 piece Amp Corner, for 2 screws with lip, nickel/chrome finish screws NOT included (see below) we recommend to use the matching screws: HR3040 screws primary used by Fender® since 1960s, but also fits old Ampeg SVTs, and SVT-200T
Remember
Part Number: FAC
Amp-Chassis: Cap Can Cover
used to cover main filter caps at the Tweed Bassman and Tweed Twin. In the amp-kits "Twin"-Style und "Bassman"-Style already included. Also suited for 6G15 Chassis Size: 139mm / 5-1/2" x 102mm / 4"; depth: 38mm / 1-1/2" Mounting plan:...
Remember
Part Number: K-ACTWCC
Black 3-Leg Corners No Lip / Set of 4 (with Screws)
Black 3-Leg Corners, Steel, No Lip / Set of 4 (with Screws) Weight: .25 lb
Remember
Part Number: FACU-MB4
Chassis Strap (3''), for Fender Champ®, Vibro Cham
Chassis Strap (3''), monting center = 7,5 cm, nickle/chrome finish 1 piece used by Fender Champ®, Vibro Champ® etc. since 1964 matching screws/bolts and nuts available here: FCSC + HR3121
Remember
Part Number: FCS3
Chassis Strap (4''), for Fender Deluxe® Reverb, Princeton® Reverb
Chassis Strap (4''), monting center = 10,16 cm, nickle/chrome finish 1 piece used by Fender Deluxe® Reverb, Princeton® Reverb, Princeton® Amp etc. since 1960s matching screws/bolts and nuts available here: FSCS + HR3121
Remember
Part Number: FCS4
Chassis Strap (5''), for Fender Twin® Reverb, Super Reverb etc
Chassis Strap (5''), monting center = 12,7 cm, nickle/chrome finish 1 piece used by Fender Twin®, Super® Reverb, Showmann, Pro Reverb etc. since 1960 matching screws/bolts and nuts available here: FCSC + HR3121
Remember
Part Number: FCS5
Chassis Strap Bolt, nickel, 80 mm
primary used by Fender® from 1960s to ca. 1975 and on all Fender Blackface Reissue models. matching hex-nut: HR3121 ca. ´75 on Fender used a shorter screw: see HR3050
Remember
Part Number: FCSC
Cover for filter caps, l =14,5 cm
Fender Style Cap Can Cover size: l=14.5cm primary used by Fender® Deluxe Reverb Amps and still today in the reissue of the Fender '65 Deluxe Reverb Amp. Dimensions: Outside: W x D x H: 159mm x 91mm x 35mm Inside: W x D x H: 129mm x 87mm...
Remember
Part Number: FCCS
Fender Amp Corner, 2 screw, set of 4pcs
Amp Corner, for 2 screws with lip, nickel/chrome finish package of 4, includes HR3040 screws primary used by Fender® since 1960s, but also fits old Ampeg SVTs, and SVT-200T
Remember
Part Number: FAC4
Fender Original Vintage Style Chrome Jack Ferrule (1/4'')
Original Vintage Style Chrome Jack Ferrule Fender Original Vintage Style Chrome Jack Ferrule (Single 1/4'') as used on Blackface extension cabinets such as the Bassman, Showman, Bandmaster and Tremolux cabinets. Packaging unit: 2 pieces
Remember
Part Number: HR3255
Fender Piggy-Back Hold Down bushings
Fender® Piggyback Bushing Insert including nut and washer genuine Fender® spare package content: 2 pieces including nut and washer used since eqarly 1960s
Remember
Part Number: FHDB2
Fender® Cover for filter caps, l=18 cm
Fender Style Cap Can Cover size: l=18cm primary used by Fender® Twin (-1974)/ Super / Pro Reverb Amps and still today in the reissue of the '65 Twin or Super Reverb Amp. Dimensions: Outside: W x D x H: 193mm x 102mm x 35mm Inside: W x D...
Remember
Part Number: FCCM
Fender® Piggy Back Under Head Clamps, 2 pieces
Fender® Piggy Back Under Head Clamps, 2 pieces Used by Fender® in early 60s for Bandmaster-, Bassman-, Showman- and Tremolux-Heads "Piggy-Back" to mount them on the external cabinets to allow to tilt them a complete set. Includes all...
Remember
Part Number: FUHC2
Fender® Piggyback Thumb Screws, 2 pcs
Piggyback Thumb Screws "Hold Down knobs" genuine Fender® since early 1960's package content: 2 pieces
Remember
Part Number: FHDK2
Fender® Tilt Back Legs 14'' for the Fender Tremolux
Fender® Tilt Back Legs 14'' This is the size as used for the Fender Tremlux 2x10" cabinet. Used by Fender® since the 1960s for the smaller amps and cabs. If you like to mount these Tilt Legs on different amps or cabinets the note: a...
Remember
Part Number: FTB14
Fender® Tilt Back Legs 16'' used for the Fender Twin Reverb
Fender® Tilt Back Legs 16'' with mounting hardware. This is the size as used for the Fender Twin Reverb. Used by Fender® since the 1960s for the classic models Twin Reverb, Vibrosonic Reverb, Pro Reverb, Bandmaster and Bassman and...
Remember
Part Number: FTB16
Fender® Tilt Back Legs 19'' for the Fender Super Reverb
Fender® Tilt Back Legs 19'' (~48.3cm) with mounting hardware. This is the size as used for the Fender Super Reverb Amp. Used by Fender® since the 1960s for the classic models Super Reverb, Concert (4x10), Vibro-King and all models with...
Remember
Part Number: FTB19
Jack plate for 1/4" phone jack ferrule
Black metal jack plate of the TAD Cabinets or for DIY projects Accepts 3/8" Jacks, holes for fixing: 3.2 mm
Remember
Part Number: HR3250
Marshall Rivets, gold, 10pcs
Marshall rivets for all Marshall Amps with handles or corners since JCM800 package containes 10pcs.
Remember
Part Number: MRV14-10
Marshall Style Rubber Amp Feet ,with inserted metal disk
For small Heads or Cabinets, with inserted metal disk, mounting hole: 4.4mm, Ø 20x9mm
Remember
Part Number: MHFS
Marshall vent grill for Heads, JCM800, JCM900 Rang
original Marshall vent grill for all JCM800 and JCM900 100W Heads like 2203, 2210, 4100 and the 6100 etc. The big black one... NO mounting parts included! Diemnsions: 44,8cm x 7,5cm requires Cut-out: 41,5cm x 4,5cm
Remember
Part Number: MRV30
Marshall® Amp feet for Heads, JCM800, JCM900 Range PU = 2 pieces
Update your amplifier's feet with Marshall approved spares and replacements. These amp feet can be used on the 2203, JVM, 2555X, 4100, 1959, DSL100, TSL100. Complete with silver rivets for easy attachment. .
Remember
Part Number: MRV3
Top seller
Viewed