Amp-Chassis: JTM45 Style

K_ACJTM45
€ 56,00
(incl. Tax excl. shipping)
in stockin_stock
Partnumber: K-ACJTM45
Amount: 

Amp-Chassis: JTM45 Style

NEW STYLE:
empty Chassis, fits JTM45 small boc head and also 1x12" or 2x12" combo cabinets

NOTE: matching gold PLEXI face and backplate are not included. Matching PLEXI Penels can be ordered at K-ACJTM45FRP

Material: Aluminium, hardened, 2mm / 5/65"

drilled/cut-outs for:
3x Octalsockets, d=25mm (for EL34 + GZ34)
3x Novalsockets, d=19mm (for ECC83)
2x holes for radial caps like V-3232500R
1x lay-down mains transformer (M50PL)
several holes for upright standing outputtransformer (MJTM45A, M50A), cables etc.

Frontside:
2x Mainsswitch
4x Inputjacks
6x Potentiometer
1x Indictor/Pilot Light

Rearside:
2x Fuseholders
1x IEC-AC-Jack (MBBIEC)
1x Impedance Selector Switch (SW1020)
2x Speakerjacks


H: 64mm W: 435mm D: 165mm
Cut out for lay-down mains transfomer M50PL with vintage correct lamination (4-1/2")

RohS Compliant

Your review

Your name:

Don't use HTML code!

Rating:

bad good

Verification-Code:
aktualisieren

Please enter the verification code:

more matching products and alternatives:

Mains Transf. for Marshall

M50PL
lay-down for Marshall JTM45 and 50W Plexi models 1986, 1987 series from 1966­-69 Direct replacement for 1202-118 Also used in TAD AMP KIT PLEXI 45 (since 2014). lamination size 4 ½ Mounting on 3 ¾ x 3 Does not fit in Marshall JTM45 ...

Output Transf. for Marshall

MJTM45A
Original data with additional 4 Ohm tap #784-103, R A-A. ca. 8kOhm, for 2x KT66, 4, 8 and 16 Ohms. Additional authentic 100V Winding the MTJM45 is stock with our TAD 45 Plexi amp kits (2014) Dimensions W x H x D: 80mm x 97mm x 96mm ...
M50A
Outputtransformer for 2x EL34, 4, 8 + 16 Ohm used in the models like 1987, 1986, 2205, 2204, 2002, 2040 Artist, etc. incl. JCM800 Series Replaces 789-139 and 784-139. Made after specs analysed from an original transformer of an 50 Watt ...

Amp Cabinets

K_CJTM45C
Empty amp-cabinet, 18W or JTM45 Plexi-Kit 2x12" Combo Bluesbreaker Style BLACK LEVANT. Height: 58,4 cm Width: 81cm Depth: 26,5 cm Chassis Cut-Out: 41,9 cm Wood: Baltic birch, finger joints Cover: MTB Black Levant Marshall Style ...
K_CJTM45H
Empty amp-head, JTM45 Style, BLACK + several Custom Colours !!! fits the TAD 18W- und JTM45 Plexi-Amp-Kits and other chassis with max. depth of 17.5cm / 6-7/8". with authentic gold colour piping and strap handle also fits the ...
K_CJTM45H_GL
Now available in "Black on Green levant"!!! Empty amp-head, JTM45 Style. Fits the TAD 18W- und JTM45 Plexi-Amp-Kits and other chassis with max. depth of 17.5cm / 6-7/8". Also fits the chassis of the Marshall models: ...
K_CJTM45H_SW
NOW AVAILABLE IN "Smooth White Tolex"! gold handle + gold piping + gold mesh Empty amp-head, JTM45 Style Fits the TAD 18W- und JTM45 Plexi-Amp-Kits and other chassis with max. depth of 17.5cm / 6-7/8". Also fits the ...

AMP-Chassis

K_ACM18W
Alumium-Chassis for 18 Plexi Amp Kit for use with tubes: 1 x EZ81, 2 x EL 84, 3 x ECC83 NOTE: matching gold PLEXI face and backplate can be ordered at K-ACM18FRP Material: Aluminium, hardened, 2mm / 5/65 drilled/cut-outs for: 6x ...

Plexi Style Head Cabinets

K_CJTM45H_SN
empty amp-head, JTM45 Style fits the TAD 18W- und JTM45 Plexi-Amp-Kits and other chassis with max. depth of 17.5cm / 6-7/8". also fits the chassis of the Marshall models: JTM45, 1964, 1986, 1987, 1987S, 1987X, 1989 (On old original ...

Screws, nuts and bolts

HR9290
Cage-nut for for TAD Aluminum Chassis z.B. K-ACM100WNH or Marshall© Chassis used in JMP, JCM800, JCM900 and others, M6/SQ9,5 one piece matching screw find here: HR9291
HR9291
Screw for for TAD Aluminum Chassis or Marshall© Chassis used in JMP, JCM800, JCM900 and others, M6x30 one piece matching cage-nut find here: HR9290
show all products from Amp Parts - AMP-Chassis
You can object to the anonymous data collection entirely.