turret board: JTM45 Plexi Style

€36.00 *

In Stock, delivery time approx.1-4 working days (Within Germany)
The delivery times for shipping abroad can be found here.

Part Number: K-FBJTM
Packaging Size: 8x2x26.5 cm
Packaging Weight: 0.111 kg
UPC: 4251594906018

this is the original turret board used in the TAD 45 Plexi amp kit. Also suitable to build any... more

Close menu

Product information "turret board: JTM45 Plexi Style"

this is the original turret board used in the TAD 45 Plexi amp kit.

Also suitable to build any other JTM45 type circuit

size: : 261x80mm

Safety information...

Responsible person for the EU

Economic operator established in the EU, who ensures that the product complies with the required regulations:

Tube Amp Doctor Musikhandels GmbH

Weinbrennerstr. 1

67551 Worms

shop@tubeampdoctor.com

www.tubeampdoctor.com

Warning:

Improper assembly, installation or use can lead to a loss of operational safety where the component is used, damage to the product, plus leading to an increased risk of serious or life-threatening injuries!

Read, write and discuss reviews... more

Close menu

Customer evaluation for "turret board: JTM45 Plexi Style"

From: Luca On: 23 Jun 2020

Curiosity

What project does it match?

From: Admin On: 24 Jun 2020

TAD: the board is used in the TAD 45 Plexi Amp Kit and works well for any other JTM45 type project

Write an evaluation

Please verify your testimonial by clicking on the link sent to your email after submitting your text.

Amp-Chassis: JTM45 Style

€59.50 *

mounting clamp Ø = 35 mm

€1.49 *

Amp-Chassis: JTM45 Style

€59.50 *

K-ACM100FP Plexi Front-Panel für 100 Watt / JTM45 Kits

Plexi Front-Panel fits on 100 Watt Kits

€24.80 *

HR9290 Käfigmutter für TAD Chassis (Plexi Kit) oder Marshall© JPM, JCM Chassis

Cage-nut for TAD Aluminum Chassis or Marshall© JPM, JCM Chassis

€0.90 *

V-5050500R 50+50uF 500V Elektrolytkondensator, radial 35x75mm

50+50uF 500V electrolytic capacitor, radial 35x75mm

€9.65 *

MBBIEC Kaltgerätenetzeinbaubuchse, IEC, Snap-In, für alle Plexi Style Chassis

AC-Chassisjack IEC-style, for all Plexi Style chassic

€6.40 *

HR9250 Unterlegscheibe mit Zahnung und zwei Bohrungen

Terminal Solder Lockwasher Lugs

€0.50 *

M50PL Netztrafo für Marshall JTM45 und 50W Plexi Modelle, TAD KIT PLEXI 45

Mains transf. for Marshall JTM45 and 50W Plexi, TAD KIT PLEXI 45

€179.50 *

125C1A Siebdrossel 4H, 90 Ohm, für Fender®, Boogie®

Choke 4H, 90 Ohm, for Fender®, Boogie®

€39.95 *

HR9291 Schraube für TAD Chassis (Plexi Kit) oder Marshall

Screw for TAD Aluminum Chassis or Marshall© Chassis

€0.60 *

HR3141 MUTTER mit Zahnscheibe für Novalfassungen, passend

NUT: kep nut for 9-pin sockets, fits to screw HR31

€0.60 *

HR3140 SCHRAUBE für Novalfassungen, passend zu Mutter HR3141

SCREW for 9-pin sockets, fits to nut HR3141

€0.40 *

HR3131 MUTTER mit Zahnscheibe für HR3130+HR3060

NUT: Kep Nut for Screws HR3130+HR3060

€0.60 *

HR3130 SCHRAUBE für Oktalfassungen, Boards, Kondensatorschellen, passend zu Mutter HR3131

SCREW for 8-pin sockets, fiberboards, cap clamps, fits to nut HR3131

€0.40 *

HR3121 MUTTER mit Zahnscheibe für FCSC + HR3050 + HR3120

NUT: Kep Nut for Chassis Strap Bolt + Speaker Screw

€0.60 *

V-3232500R 32+32uF 500V Elektrolytkondensator, radial 35x50mm

32+32uF 500V electrolytic capacitor, radial 35x50mm

€9.60 *

SW1003-M Netzschalter 2-fach-AUS, Metallhebel

Power switch, DPST, double ON/OFF, metal toggle

€12.50 *

MK Marshall Style Knopf mit Schraube, schwarz +gold, für 6,3 Achse

Marshall Style Knob with screw, 6,3 mm Axis, Black with Gold cap

€2.59 *

M50A Ausgangsübertrager für Marshall 50W, 2x EL34, 4+8+16 Ohm

Output transformer for Marshall 50W, 2x EL34, 4+8+16 Ohm

€168.80 *

HR9260 Zahnscheibe für Potentiometer mit 3/8" Gewinde

Internal Lock Washer for potentiometer with 3/8" bushing

€0.50 *

HR9012 Gummitülle, Kabeldurchführung z.B. für TAD Chassis

Rubber grommet for TAD Chassis, 12mm

€0.80 *

HR3160 Schrauben M3x6, schwarz, Pozidriv

Metric Black Pozidriv M/C Srews, M3x6

€0.60 *

HR3120 SCHRAUBE für Trafomontage, passend zu HR3121

SCREW for transformer mounting, fitting HR3121

€0.40 *

FFH Sicherungshalter für Fender Amps1960er-1980er

Fuse-Holder (Fender style of 1960s - 80s)

€4.97 *

CO1050 Klinkenbuchse 6,3 mm, mono, Lötösen, kurzschließen

1/4"Phone Jack, plastic with chrome nut, mono, shorting

€2.00 *

K-ACJTM45RP Plexi Rearpanel für 45 Watt Kit, fits

Plexi Rearpanel for 45 Watt Kit, fits

€24.80 *

SW1021 Impedanzwahlschalter (z.B. für TAD Plexi Amp Kits)

Impedance selector switch (used in TAD Plexi Kits)

€12.95 *

SETP-M-JTM45-CTS CTS Poti Set, Upgrade für Marshall JTM45 + TAD Amp Kit Plexi JTM45

CTS Poti set, Upgrade for Marshall JTM45 + TAD Amp Kit Plexi JTM45

€48.65 *

Z-KBA Aluminiumfolie, selbstklebend zur Abschirmung, 100

Aluminum foil, self-adhesive, 100mm width

€1.95 *

V-8475 8uF @ 475V 13x25mm Elektrolytkondensator, axial, 105°C

8uF @ 475V 13x25mm electrolytic capacitor, axial, 105°C

€2.18 *

PLEXI-Amp Amber Pilot light

€12.00 *

HR9280 Distanzbolzen, Innen-Innen, M3, 12mm, Messing-vern

Spacer, internal thread with M3, l=12mm, nickel-pl

€0.84 *

Z-R1K.5W Metalloxidschichtwiderstand 1K Ohm/5W, 5%

Metal-Oxide Resistor 1KOhms/5W, 5%

€3.49 *

Z-R10K.2W Metalloxidschichtwiderstand 10K Ohm/2W, 2%

Metal oxide film 10K Ohm/2W, 2%

€1.50 *

V-25025BP 250uF @ 25V 16x27mm BIPOLAR Elektrolytkondensator

250uF @ 25V 16x27mm BIPOLAR axial capacitor, 105°

€2.59 *

SETP-M-JTM45 Poti Set für Marshall JTM45 + TAD Amp Kit Plexi JTM45

Poti set for Marshall JTM45 + TAD Amp Kit Plexi JTM45

€19.24 *

RV-4AB3C1B 4AB3C1B TAD Hallspirale 2x2 Federn

4AB3C1B TAD Reverb Can 2x2 Springs

€32.50 *

CB3125 Push-back-wire (stranded): Schwarz, 1m

Push-back-wire (stranded): Black, 1m

€3.86 *

Push-back-wire (solid): yellow, 1m

€3.20 *

Push-back-wire (solid): green, 1m

€3.45 *

K-FB100W Turret-Board:100W Plexi Style, mit Lötstützpunkten

turret board: 100W Plexi Style, with turrets

€36.00 *

K-FBT26B TAG BOARD: 257 x 66,7 x 3mm rot-braun

TAG BOARD: 257 x 66,7 x 3mm red-brown

€11.00 *

Amp-Chassis: JTM45 Style

€59.50 *

TURRET-S3.50 Turrets, runde + geschlitzte Form, 50 Stück Packung

Turret, round slotted version, 50pc package

€9.95 *

K-FB18W Turret-Board:18W Plexi Style, mit Lötstützpunkten

turret board: 18W Plexi Style, with turrets

€36.00 *

Turret tool kit

€16.31 *

Mains transf. for Marshall JTM45 and 50W Plexi, TAD KIT PLEXI 45

€179.50 *

Plexi Front-Panel fits on 100 Watt Kits

€24.80 *

MJTM45A Übertrager für Marshall JTM45, 2xKT66 mit 4,8,16 Ohm

Output transf. for Marshall JTM45, 2xKT66 with 4, 8,16 Ohms

€179.90 *

Eyeletboard without eyelets

€18.00 *

K-FBAB763R Eyeletboard: Blackface Amps mit Reverb AB763

Eyeletboard: Blackface Amps with Reverb type AB763

€27.50 *

K-FBT1-11 TURRETBOARD: einreihig mit 11 Turrets

TURRETBOARD: one row with 11 turrets

€6.00 *

K-FBPR Eyeletboard für Blackface Princeton Reverb Style AA1164

Eyeletboard use for Blackface Princeton Reverb AA1164 circuit

€23.50 *

Eyeletboard: Tweed Bassman 5F6 Style

€25.00 *

K-FBT1-23 TURRETBOARD: einreihig mit 23 Turrets

TURRETBOARD: one row with 23 turrets

€8.50 *

Output transformer for Marshall 50W, 2x EL34, 4+8+16 Ohm

€168.80 *

EYELETBOARD - TAD KIT: Stand Alone Reverb Unit 6G15

€20.00 *

MJTM45RP Netztrafo für Marshall JTM45 Reissue Upgrade

Mains transf. for Marshall JTM45 Reissue upgrade

€159.50 *

Terminal Solder Lockwasher Lugs

€0.50 *

Choke 4H, 90 Ohm, for Fender®, Boogie®

€39.95 *

Z-EYELET Hohlniete / Eyelet für Fiberboards (Lötösen)

Eyelet for DIY projects or modifications of Fender style fiberboards

From €0.18 *

Marshall Style Knob with screw, 6,3 mm Axis, Black with Gold cap

€2.59 *

Eyelet tool kit

€30.35 *

Laney®- VC15-110 (2009) FX LOOP/SPK OUT + DIGITAL REVERB

€49.00 *

32+32uF 500V electrolytic capacitor, radial 35x50mm

€9.60 *

K-FBSC Eyeletboard für: Small Cap board (AB763 Blackface Amps)

Eyeletboard typical use for: Small Cap board (AB763 blackface amps)

€13.99 *

mounting clamp Ø = 35 mm

€1.49 *

8uF @ 475V 13x25mm electrolytic capacitor, axial, 105°C

€2.18 *

Eyeletboard: Tweed Twin High-Power Style 5F8

€27.50 *

Eyeletboard: Tweed Champ Style 5F1

€16.01 *

Terminal strip 7 lug

€2.50 *

Terminal strip 5 lug

€2.20 *

Eyeletboard: Tweed Deluxe 5E3 Style

€20.00 *

Terminal Solder Lockwasher Lugs, tin plated brass

€0.50 *

Aluminum foil, self-adhesive, 100mm width

€1.95 *

K-ACM100W Amp Chassis für 100 Watt Plexi Kit

Amp Chassis typical for 100 Watt Plexi Kit

€96.00 *

SCREW for transformer mounting, fitting HR3121

€0.40 *

M100D Siebdrossel f. Marshall 50W und 100W, z.B für 2203

Choke for Marshall 100W / 50W, for 2203, 2204, 220

€55.00 *

Eyeletboard: Brownface Deluxe 6G3 Style

€25.00 *

Internal Lock Washer for potentiometer with 3/8" bushing

€0.50 *