Choke for Marshall 100W / 50W, for 2203, 2204, 220

M100D Siebdrossel f. Marshall 50W und 100W, z.B für 2203

€55.00 *

In Stock, delivery time approx.1-4 working days (Within Germany)
The delivery times for shipping abroad can be found here.

Part Number: M100D
Packaging Size: 12x14x17 cm
Packaging Weight: 1.2 kg
UPC: 4251594930129

Choke for all Valve Marshalls with 100W / 50W, up to JCM800 Range like 2203, 2204, 2205, 2210,... more

Close menu

Product information "Choke for Marshall 100W / 50W, for 2203, 2204, 220"

Choke for all Valve Marshalls with 100W / 50W, up to JCM800 Range like 2203, 2204, 2205, 2210, 1959, 1987, 1992 and many others.

data: 5 H, 120mA DC, Rdc 115 Ohm

Mounting on 44.5mm x 40mm

repalcement for INDT00013 and Drake 1471-263

Upgrade for the Marshall JCM2000 series: replaces R71 (270 Ohm/7W) in TSL and DSL100 models

also very usefull as a modification on the Marshall JVM Series (410H, 410C, 210H, 205H, 205C, 215C), replaces R106 (470Ohm/7W)

Replacement for Laney #6013 choke also!

Transformator Type:

Choke

Safety information...

Responsible person for the EU

Economic operator established in the EU, who ensures that the product complies with the required regulations:

Tube Amp Doctor Musikhandels GmbH

Weinbrennerstr. 1

67551 Worms

shop@tubeampdoctor.com

www.tubeampdoctor.com

Warning:

Improper assembly, installation or use can lead to a loss of operational safety where the component is used, damage to the product, plus leading to an increased risk of serious or life-threatening injuries!

Read, write and discuss reviews... more

Close menu

Customer evaluation for "Choke for Marshall 100W / 50W, for 2203, 2204, 220"

Write an evaluation

Please verify your testimonial by clicking on the link sent to your email after submitting your text.

M100AN Ausgangsübertrager für Marshall 100W, JCM900, JCM2000

Output transf. for Marshall 100W JCM900, JCM2000

€172.60 *

M50A Ausgangsübertrager für Marshall 50W, 2x EL34, 4+8+16 Ohm

Output transformer for Marshall 50W, 2x EL34, 4+8+16 Ohm

€168.80 *

M100A Ausgangsübertrager für Marshall 100W, ab Bj.''66 auch für JMP, JVM 800

Output transformer for Marshall 100W amps, used since 1966 for all...

€187.50 *

V-5050500R 50+50uF 500V Elektrolytkondensator, radial 35x75mm

50+50uF 500V electrolytic capacitor, radial 35x75mm

€9.65 *

mounting clamp Ø = 35 mm

€1.49 *

M100PS Netztrafo für Marshall 100W, ab 1971-89

Mains transf. for Marshall 100W used since 1971-89

€194.60 *

MK Marshall Style Knopf mit Schraube, schwarz +gold, für 6,3 Achse

Marshall Style Knob with screw, 6,3 mm Axis, Black with Gold cap

€2.59 *

M50PS Netztrafo für Marshall 50W, stehender Einbau

Mains transf. for Marshall 50W, upright standing

€177.00 *

V-10450 10uF @ 450V 12x30mm Elektrolytkondensator, axial

10uF @ 450V 12x30mm axial electrolytic capacitor

€1.75 *

SW1021 Impedanzwahlschalter (z.B. für TAD Plexi Amp Kits)

Impedance selector switch (used in TAD Plexi Kits)

€12.95 *

S9CSK-BT VT9-ST-C Belton Novalsockel, Lötösen für chassis mount

VT9-ST-C Belton Noval socket, solder lugs with skirt

€1.99 *

M50PL Netztrafo für Marshall JTM45 und 50W Plexi Modelle, TAD KIT PLEXI 45

Mains transf. for Marshall JTM45 and 50W Plexi, TAD KIT PLEXI 45

€179.50 *

Amp-Chassis: JTM45 Style

€59.50 *

V-22500 Elko 22uF @ 500V axial, 16x32mm Elektrolytkondensator 105°C

22uF @ 500V 16x32mm axial capacitor 105°C

€2.89 *

Diode, 1N4007, 1A, 1000V

€0.50 *

M100PL Netztrafo für Marshall 100W Plexi liegender Einbau

Mains transf. for Marshall 100W Plexi lay-down type

€178.00 *

K-ACM100FP-M Plexi Front-Panel für 100 Watt MASTER VOLUME

Plexi Front-Panel fits on 100 Watt MASTER VOLUME

€24.80 *

TR Tube Retainer (EL34, E34L, 6L6GC-STR, KT77 etc.), vernickelt

Spring Tube Retainer (EL34, E34L, 6L6GC-STR, KT77 etc.) with...

€2.28 *

S8M-BT VT8-ST Belton Oktalfassung, Micalex, Lötösen, einteilig

VT8-ST Belton Octal socket, Micalex, solder lugs

€2.48 *

K-ACM100W Amp Chassis für 100 Watt Plexi Kit

Amp Chassis typical for 100 Watt Plexi Kit

€96.00 *

K-ACM100FP Plexi Front-Panel für 100 Watt / JTM45 Kits

Plexi Front-Panel fits on 100 Watt Kits

€24.80 *

HR9290 Käfigmutter für TAD Chassis (Plexi Kit) oder Marshall© JPM, JCM Chassis

Cage-nut for TAD Aluminum Chassis or Marshall© JPM, JCM Chassis

€0.90 *

CO1050 Klinkenbuchse 6,3 mm, mono, Lötösen, kurzschließen

1/4"Phone Jack, plastic with chrome nut, mono, shorting

€2.00 *

CTS-D-A1M CTS 1M LOG Custom Dimple Potentiometer, glatte 6.3mm Achse, 24mm

A1M LOG CTS Dimple Potentiometer

€6.95 *

V-47500 TAD Gold Cap 47uF @ 500V Elektrolytkondensator, axial

TAD Gold Cap 47uF @ 500V electrolytic capacitor

€5.90 *

V-16475 16uF @ 475V 12x30mm Elektrolytkondensator, axial, 105°C

16uF @ 475V 12x30mm electrolytic capacitor, axial, 105°C

€2.34 *

TC Tube Clamp/retainer für Oktalfassung-Röhren (6L6GC, EL34)

Tube clamp/retainer for Octal-Base tubes (6L6GC/EL34)

€1.59 *

S9SH-50-BT Abschirmhülse für Novalsockel, Belton, l=50mm

Belton Tube shield, for noval socket, l=50mm

€1.40 *

RV-4AB3C1B 4AB3C1B TAD Hallspirale 2x2 Federn

4AB3C1B TAD Reverb Can 2x2 Springs

€32.50 *

PLEXI-Amp Red Pilot light

€13.99 *

PLEXI-Amp Amber Pilot light

€12.00 *

MHFS Marshall Style Gummifuß, mit eingelegter Metallscheibe

Marshall Style Rubber Amp Feet ,with inserted metal disk

€0.90 *

MBBREP IEC-Kaltgerätenetzeinbaubuchse mit Einbaumaßen der Bulgin "Pig-Nose" Buchsen

AC-Chassisjack IEC-style with mounting specs of the orig. Bulgin...

€6.40 *

Output transf. for Marshall 100W JCM900, JCM2000

€172.60 *

K-FB100W Turret-Board:100W Plexi Style, mit Lötstützpunkten

turret board: 100W Plexi Style, with turrets

€36.00 *

K-ACM100RP Plexi Rear-Panel für 100 Watt Kits

Plexi Rear-Panel fits on 100 Watt Kits

€24.80 *

HR9255 Steckverbinder zum Lautsprecheranschluss

Solderless Terminals, female, for speaker, 1/4" fits Jensen,...

€0.25 *

125C1A Siebdrossel 4H, 90 Ohm, für Fender®, Boogie®

Choke 4H, 90 Ohm, for Fender®, Boogie®

€39.95 *

HR1021 Spezialmutter für Impedanzwahlschalter SW1021

Special nut for impedance selector switch SW1021

€0.95 *

CTS-D-B5K CTS 5K LIN Custom Dimple Potentiometer, glatte 6.3mm Achse, 24mm

B5K LIN CTS Dimple Potentiometer, solid shaft

€6.95 *

CTS-D-A500K-MK CTS 500K Dimple Vintage Audio Taper (LOG) Gitarrenpotentiometer, Riffelachse

CTS 500K Vintage Audio Dimple Potentiometer, medium Shaft

€9.35 *

Output transformer for Marshall 100W amps, used since 1966 for all...

€187.50 *

Output transformer for Marshall 50W, 2x EL34, 4+8+16 Ohm

€168.80 *

Choke 4H, 90 Ohm, for Fender®, Boogie®

€39.95 *

003-6486-000 Siebdrossel Upgrade für Fender, Made in USA

Choke upgrade for Fender, made in USA

€44.95 *

Mains transf. for Marshall 100W used since 1971-89

€194.60 *

Output transf. for Marshall 100W JCM900, JCM2000

€172.60 *

Mains transf. for Marshall 50W, upright standing

€177.00 *

AC30D Siebdrossel 100 mA, 19 H für VOX® AC 30

Choke 100 mA, 19 H VOX® AC 30

€59.60 *

Mains transf. for Marshall 100W Plexi lay-down type

€178.00 *

M100PN Netztrafo für Marshall JCM 900, JCM2000,

Mains transf. for Marshall JCM 900, JCM2000

€173.00 *

Amp-Chassis: JTM45 Style

€59.50 *

Amp Chassis typical for 100 Watt Plexi Kit

€96.00 *

Mains transf. for Marshall JTM45 and 50W Plexi, TAD KIT PLEXI 45

€179.50 *

MJTM45RP Netztrafo für Marshall JTM45 Reissue Upgrade

Mains transf. for Marshall JTM45 Reissue upgrade

€159.50 *

50+50uF 500V electrolytic capacitor, radial 35x75mm

€9.65 *

MJTM45A Übertrager für Marshall JTM45, 2xKT66 mit 4,8,16 Ohm

Output transf. for Marshall JTM45, 2xKT66 with 4, 8,16 Ohms

€179.90 *

Reverb Drive Transformer, Fender®, Boogie®

€39.90 *

MJTM18WA Ausgangsübertrage für 18W Plexi Kit

Output transf. for 18W Plexi Kit

€111.90 *

M100AN-KT66 Ausgangsübertrager für Umbau auf KT66: Marshall JCM900, JCM2000

Output transf. for conversion to KT66: Marshall 100W JCM900, JCM2000

€149.50 *

Plexi Front-Panel fits on 100 Watt Kits

€24.80 *

K-ACM100WNH Amp Chassis für 100 Watt Plexi Kit, OHNE BOHRUNGEN

Amp Chassis typical for 100 Watt Plexi Kit, NO HOLES

€75.51 *

Plexi Front-Panel fits on 100 Watt MASTER VOLUME

€24.80 *

K-ACJTM45NH Amp Chassis für 45 und 18Watt Plexi Kit, OHNE BOHRUNGEN

Amp Chassis typical for 45 and 18 Watt Plexi Kit,

€48.50 *

VT1000ESG-S TAD Vorschalttrafo mit Gehäuse 1000VA

TAD Step-Down transformer with enclosure 1000VA

€129.00 *

MJTM100A Ausgangsübertrager für Marshall JTM100, für4x KT66 mit 4, 8+16 Ohm

Output transf. for Marshall JTM100,4x KT66 4, 8+16 Ohm

€196.10 *

018343 Ausgangsübertrager 2x 6L6GC/5881 für 2, 4 und 8 Ohm

Output transf. 2x 6L6GC / 5881 for 2, 4 and 8 Ohm

€149.50 *

V-100100500R 100+100uF 500V Elektrolytkondensator, radial 35x80mm

100+100uF 500V electrolytic capacitor, radial 35x80mm

€14.95 *

TFS-0017 Anpassungsübertrager, original Marshall, für 100W Solid State Modelle, 4+8+16 Ohm

Impedance Matching Transformer, Marshall original, NOS, used in...

€49.00 *

M50PL-NOS MAINS : Marshall 50W, liegende Ausführung" lay-down", NOS, nur für 110/120V

MAINS : Marshall® 50W, lay-down, NOS, 110/120V ONLY

€295.00 *

Marshall Style Knob with screw, 6,3 mm Axis, Black with Gold cap

€2.59 *

MJTM18WP Netztrafo für Marshall 18W Plexi / TAD Amp-Kit

Mains transf. for Marshall 18W Plexi / TAD Amp-Kit

€149.50 *

1k / 5W Enamel Resistor

€2.50 *

K-ACM18W Amp Chassis für 18 Watt Plexi Kit

Amp Chassis for 18 Watt Plexi Kit

€59.50 *

mounting clamp Ø = 35 mm

€1.49 *

125A1A Ausgangsübertager für Fender Deluxe Reverb, Princeton Reverb

Output transf. for Fender Deluxe Reverb, Princeton Reverb

€86.20 *

turret board: 100W Plexi Style, with turrets

€36.00 *

Plexi Rear-Panel fits on 100 Watt Kits

€24.80 *

004-7605-000 Reverb Transformer, Fender® Style Vibroking, 63` Tube Reverb

Reverb Transformer, Fender® Vibroking, 63` Tube Reverb

€65.40 *

Amp-Chassis: Deluxe Reverb AB763 Style

€66.00 *

125A3A-GS Ausgangsübertrager für Fender Champ Grand-Stack Version

Output transf. for Fender Champ Grand-Stack version

€94.20 *