No results were found for the filter!
Max. 20 Watt, 2x EL84, Impedance 4, 8, 16 Ohms perfect replacement for the Marshall 1974X and 2061X, replaces C2116 and D4910 Upgrade for many Amps with 2x EL84 like Bugera V22 etc. Lamination: 3", Stacking 1 1/16". Mounting on 3 3/4" W...
Remember
Part Number: MJTM18WA
Output transformer for the conversion to KT66 in Marshall JCM900, JCM2000 Series Models: 2100, 4100, 6101, DSL100, TSL100, TSL122 etc. MADE IN GERMANY! does not fit 9200 power amp due to giant stacking!!! comes with shroud and mounting...
Remember
Part Number: M100AN-KT66
Outputtransformer for 4x KT66, 4, 8 and 16 Ohms. Killertone, used in the Amp Kit JTM45-100 Made after original specs taken from our vintage Marshall JTM100 from 1965. This is one of the first 25 amps Marshall ever made with a single 100W...
Remember
Part Number: MJTM100A
Original data with additional 4 Ohm tap #784-103, R A-A. ca. 8kOhm, for 2x KT66, 4, 8 and 16 Ohms. the MTJM45 is stock with our TAD 45 Plexi amp kits. replacement for the 784-389 and D2505 for Marshall JTM45 Reissue (Mod. 2245) and...
Remember
Part Number: MJTM45A
Output Transformer for : Marshall® 100W models like JCM 900, 2100 ,4100, 6101, 9200, EL34 100/100 etc. fits also JCM2000 models like DSL100, TSL100, TSL122 etc. one-to-one swap! replaces the original Dagnall C3070 comes with top shroud...
Remember
Part Number: M100AN
Output transformer for: Marshall® Major like used from 1967 to 1974 in the model numbers 1966, 1967, 1978. 200 W, Ultralinear, 4x KT88,200W max., 4, 8, 16 Ohm with screen taps superior quality M6 lamination: 5 1/4", Stack: 2 5/8" Raa ca....
Remember
Part Number: M200A
Output transformer for Marshall® 50-60W, 2 x EL 34 or 2x 5881, Impedance: 4, 8, 16 Ohm for JCM2000 range like Marshall® models DSL50, TSL60, TSL601, TSL602 for JCM900 range like 2500, 2501, 4500, 4501, 9100 etc. Rack power amp: 9100...
Remember
Part Number: M50AN
Output transformer:Marshall® 20W, for Power Amp Marshall EL84-20/20 perfect replacement for Drake 351-611 and TXOP 00009 Max. 20W, 2 x EL 84, Impedanz 8, 16 Ohm. lamination: EI57/20.5 W x L x H: 57mm x 48mm x 40.5mm Impedance ca. 7.7k...
Remember
Part Number: M20AN
Output Transformer for 4x EL34 to 4, 8, 16 Ohms, suitable for all 100W models from 1966 on. JMP 100W models, JCM800 (2203, 2210, 1959) and 6100 Heads Modelled after an original Transformer from a `68 Super Lead replaces C2668 and C1998...
Remember
Part Number: M100A
Outputtransformer for 2x EL34, 4, 8 + 16 Ohm used in the models like 1987, 1986, 2205, 2204, 2002, 2040 Artist, etc. incl. JCM800 Series Replaces 789-139 and 784-139. Made after specs analysed from an original transformer of an 50 Watt...
Remember
Part Number: M50A
Output transformer: Marshall® DSL201, JCM2000 Serie METXOP00014 Output transformer: Marshall® DSL201, JCM2000 Serie Max. 20W, 2 x EL 84, Impedanz 8, 16 Ohm. lamination: EI57/20.5 Impedance ca. 7.7k Not suitable for Class A Operation. For...
Remember
Part Number: M20AN-1
NEW VERSION with superior M6 lamination quality. UPGRADE! CUSTOM MADE BY DAGNALL FOR TAD comes with shroud like pictured Max. 40W, 4 x EL 84, Impedance 8, 16 Ohm, original Dagnall lamination size 3", Stacking 1" mounting on 2.5" x 2"...
Remember
Part Number: M40AN
Pot A10K log PC, 16mm (orig. Park spare), Ersatztyp für MEPOTP90009
Remember
Part Number: MEPOTP00021
Pot A200K log PC, 11mm, for Marshall Valvestate II and AVT-Series, vertical
Remember
Part Number: MEPOTP00085
Pot B5K lin PC, 11mm, for Marshall Valvestate II and AVT-Series
Remember
Part Number: MEPOTP00098
Pot Set for Marshall Artist 3203/4203 contents: Boost: Gain: A1M Volume: A100K Tone: B22K Normal: Volume: A1M EQ: Treble: B220K Middle: B22K Bass: A1M Master: Volume: A4K7 Reverb: A100K
Remember
Part Number: SETP-M-A3203.4203
Poti Set for vintage Marshall JCM 25/50, models 2555, 2554, 2558 etc. does not fit current 2555X models! contents: 2x CTS-PP-A1M position: Input Gain, Output Master 2x Z-ML-B220K position: Lead Master, Treble 1x Z-ML-A100K position:...
Remember
Part Number: SETP-M-2555
Poti Set for Marshall Anniversary 6100 contents: 5 x Z-MS-A1M position: Clean Volume; Crunch: Gain, Bass; Lead: Gain, Bass 2 x Z-MS-A100K position: Crunch Volume; Lead Volume 4 x Z-MS-B220K position: Clean: Treble, Bass; Crunch: Treble;...
Remember
Part Number: SETP-M-6100
Poti Set for Marshall JCM600 (Head) , JCM601 (Combo 1x12"), JCM602 (Combo 2x12") contents: Clean: VR1 A1M Volume VR2 A1M Bass VR3 B22k Middle VR4 B220K Treble Overdrive: VR5 B220K Gain VR6 B220k Volume VR7 A1M Bass VR8 B22k Middle VR9...
Remember
Part Number: SETP-M-JCM600
Poti Set for Marshall JCM800 2203+2204 with vertical oriented inputs (not suitable for the reissue series!) contents: 3x Z-A1M 2x Z-B25K 1x Z-B250K
Remember
Part Number: SETP-M-2203.2204
Poti Set for Marshall JCM800 4210 Fits the later version which features the the IC CA3046 for channel switching The first Version with transistor switching needs other pot values! In case of doubt please check prior to ordering!...
Remember
Part Number: SETP-M-4210
Poti Set for Marshall JCM800 4210, 4212, 2205, 4211, 2210 Fits the later version which features the the IC 3046 for channel switching The first Version with transistorswitching needs the set SETP-M-JCM800-V2, see similar products. In...
Remember
Part Number: SETP-M-JCM800
Poti Set for Marshall JCM800 Bass 60 5506 contents: 3 x Z-ML-B22K 4 x Z-ML-B220K
Remember
Part Number: SETP-M-JCM800-5506
Poti Set for Marshall JCM900, 4100/4500 (4100, 4500, 4101, 4102, 4501, 4502) contents: 4x Z-MS-A1M 4x Z-MS-B220K 1x Z-MS-B22K 1x Z-MS-B10K 1x Z-MS-TB10K
Remember
Part Number: SETP-M-4100.4500
Top seller
Viewed