No results were found for the filter!
Celestion G12H-150 REDBACK, 12" 150Watt, UK MADE Power. Tone. Now you can have them both! The G12H-150 Redback has been created for players who are looking for extreme power handling but refuse to compromise on great tone. Rated at a...
Remember
Part Number: LCEG12H-150-8
The Celestion G12H-75 Creamback, (aka the "Creamback H'') is available NOW. Following the success of the G12M-65 Creamback launched in 2012, Celestion have created a ''Creamback version'' of their historic G12H guitar speaker. The brand...
Remember
Part Number: LCEG12H-75-8
The legendary british Blues & Rock sound of the 60s & 70s. Many great guitar solos have been voiced by the G12M Greenback. With the development of Rock and Roll, audience sizes grew and consequently more and more amplification became...
Remember
Part Number: LCEG12M-8
The first-ever hemp cone guitar speaker built by Celestion, the Hempback represents a new development in Celestion's never-ending pursuit of outstanding tone. The cone was specifically chosen for its tonal character and combined with a...
Remember
Part Number: LCEG12M50-16
The G12M Greenback is perhaps the definitive vintage Celestion ceramic magnet guitar speaker. Developed in the mid-sixties, it was quickly adopted by players like Hendrix, Clapton, Beck and Page, who typified the louder and more...
Remember
Part Number: LCEG12M-65-8
END OF LIFE - only while stock lasts Great for super clean tones and well defined bass. Delivering the fantastic Celestion tone with exceptional clarity, this speaker produces a full, smooth yet clean sound, handling the bass end...
Remember
Part Number: LCEG12T100-8
Featured in the world's top selling 4x12 cabinet, the G12T-75 is a high powered rock player's dream. Built to meet the demands of high gain amplifiers, the G12T-75 combines a huge, tightly controlled low-end and aggressive mid-range with...
Remember
Part Number: LCEG12T75-8
Hint!
For our 30th anniversary as a company, Celestion gave us a 12", 30W loudspeaker that belongs to the G12H family - and is made in England. With slight variations in components and voicing the LCEG12TAD-8 is sonically somewhere between a...
Remember
Part Number: LCEG12TAD-30-8
With a larger cone delivering an extended low end response the 100-watt Fullback has a big deep voice delivering smooth and expressive tones seemingly without effort. While retaining our classic harmonically complex and finely detailed...
Remember
Part Number: LCEG15V-100-8
Genuine Celestion Gaskets for Front-Loading 12" This set of 4 gaskets allows you to front-load any Celestion 12" speaker into the corresponding cabinet. When ordering 60 sets, the gaskets will be shipped in bulk without being packed in...
Remember
Part Number: LCE-GSKT12-SET
The Celestion Alnico Gold is the ultimate 10" speaker, blending unmistakable Alnico class with a rich low-end, creamy midrange and vintage chiming top-end. Springy, warm, revealing and highly expressive, it can be used singly or in pairs...
Remember
Part Number: LCEG10GOLD-8
Building on the platform of the Blue, the Gold is a higher-powered, Alnico-magnet speaker that recreates the unmistakable sonic signature of a well played-in original. Over time, the high frequencies of a Blue soften and become less...
Remember
Part Number: LCEGOLD-8
The G10 Greenback is a 10-inch guitar loudspeaker capable of delivering classic rock tone. By performing extensive listening tests with 10-inch Celestion ceramic drivers from the late 60s onwards, as well as drawing on the experience...
Remember
Part Number: LCEG10M-8
Celestion H1-7050 'NoBell' Horn/ Aluminium 70x50 Horn The H1-7050 'NoBell' horn flare contains embedded elastomer side panels to make it acoustically inert. Mounting Information Cut-out diameter: 155mm/6.1in diameter Number of mounting...
Remember
Part Number: LCPH1-7050
Celestion H1-9040P Horn/ Plastic 90x40 Mounting Information Cut-out diameter: 115mm/4.5in x 250mm/9.8in Number of mounting slots 2 holes on 76mm/2.9in Throat exit 25.4mm/1in
Remember
Part Number: LCPH1-9040P
Celestion H1SC-8050 Horn/ Plastic 80x50 Lightweight horn flare with 1" throat exit Compatible for use with screw on compression drivers Exponential horn flare with 80° x 50° radiation pattern 1.5kHz cut-off frequency Hard-wearing...
Remember
Part Number: LCPH1SC-8050
Celestion H1SC-9040 Horn/ Plastic 90x40 Lightweight horn flare with 1" throat exit Compatible for use with screw on compression drivers Exponential horn flare with 90° x 40° radiation pattern 1.5kHz cut-off frequency Hard-wearing...
Remember
Part Number: LCPH1SC-9040
Originally created as a higher-power handling variant of the G12M Greenback, the G12-65 is widely regarded as one of the best speakers ever produced for use in a 4x12 cabinet. With its fast attack and tightly controlled low-end, the...
Remember
Part Number: LCEG12-65H-8
If the G12M was to become a classic, it was the G12H with its heavier magnet that really characterised the sound of rock guitar for the new breed of player that emerged in the 1960s. Listen to any Hendrix recording and the chances are...
Remember
Part Number: LCEG12H-H-8
New for 2011, Celestion have re-introduced the Heritage Series G12H (75) featuring a 75 c/s lead cone for an alternative tonal balance (compared with the G12H (55) version with 55 c/s base cone) that places a little less emphasis on bass...
Remember
Part Number: LCEG12H-H75-8
The legendary british Blues & Rock sound of the 60s & 70s. Heritage Series G12M Way back in the 1960s, Celestion released a version of the popular G12 guitar loudspeaker called the G12M. These days nicknamed the Greenback, with its...
Remember
Part Number: LCEG12M-H-8
Celestion LF Pressed Chassis / Ferrite K12H-100TC 8 Ohm Features: 12" twin cone drive unit with extended high frequency response 1.75" high temperature copper voice coil for increased reliability and 100Wrms (AES standard) / 150 Watt...
Remember
Part Number: LCPK12H-100TC-8
Celestion LF Pressed Chassis / Ferrite K12H-200TC 8 Ohm Features: 12" twin cone drive unit with extended high frequency response 2" high temperature copper voice coil for increased reliability and 200Wrms (AES standard) / 250 Watt (EIA)...
Remember
Part Number: LCPK12H-200TC-8
Celestion LF Die- cast Chassis Loudspeakers/ Ferrite CF1840JD 18" 1000W 8 Ohm Features: 18" ferrite magnet, cast aluminium chassis LF driver delivering 1000Wrms (AES Standard) power handling and 98dB sensitivity 4" high temperature, dual...
Remember
Part Number: LCPCF1840JD-8
Top seller
Viewed