No results were found for the filter!
Internal Lock Washer for potentiometer with 3/8" bushing
Internal Lock Washer for potentiometer with 3/8" bushing like our Z-A1M etc. See "matching products" perfect for Switchcraft jacks 1/4" like the CO11 and CO12A also
Remember
Part Number: HR9260
Hint!
SWITCHCRAFT #12A 1/4" Mono Phone Jack
SWITCHCRAFT 1/4" Phone Jack, metal, mono, shorting, 3/8" bushing This jack was and still is the standard in guitar amps in the US! Still in use by Fender and many others! Recommended for most older Fedner amps. Also used in the TAD Tweed...
Remember
Part Number: CO12A
SWITCHCRAFT #11 1/4" (6,3mm) Metal Phone Jack, open, mono
the original SWITCHCRAFT (USA) phone jack. with sturdy contacts, insulating washers and original US bushing (matching nuts is included). the standard open phone jack since decades.
Remember
Part Number: CO11
RCA/Cinch Jack for vintage Fender Footswitch, Reverb
Panelmount jack with the speical size fitting the classic blackface or silverface Fender Back-Panels and for the TAD Blackface Amp-Kits. used for the footswitch and reverb cable connection. Original Switchcraft! Supply content: suitable...
Remember
Part Number: Z-RJ
SWITCHCRAFT #12B 1/4" Phone Jack, Stereo
SWITCHCRAFT 6.3mm / 1/4" Stereo 3 Conductor Jack w/Nut & Washer, 7,0mm / .276" Bushing, Double Open Circuit metal, stereo, 3/8" bushing often used as INPUT on quality stomp boxes US-MADE Picture 4 shows the difference in length between...
Remember
Part Number: CO12B
SWITCHCRAFT Shoulder washers for 1/4" Phone Jack
Shoulder washers (Fiber) for isolated mounting of Switchcraft 1/4" jacks Needs 11.5mm drill in chassis used together with washer HR9269
Remember
Part Number: HR9268
SWITCHCRAFT #12A-L 1/4" Phone Jack, with long bushing
SWITCHCRAFT 1/4" Phone Jack L12A, with extra long bushing (9,00mm / 0.375") identical withj Swichcraft L11 if shorting contact is not connected
Remember
Part Number: CO12A-L
SWITCHCRAFT Flat washers for 1/4" Phone Jack
Flat washers (Fiber) for isolated mounting of Switchcraft 1/4" jacks Needs 11.5mm drill in chassis used together with shoulder washer HR9268
Remember
Part Number: HR9269
Washer for potentiometer with 3/8" bushing
Washer for potentiometer with 3/8" bushing like our Z-A1M etc. See "matching products" perfect for Switchcraft jacks 1/4" like the CO11 and CO12A also
Remember
Part Number: HR9262
Nut for potentiometer with 3/8" bushing
Nut for potentiometer with 3/8" bushing like our Z-A1M etc. See "matching products" perfect for Switchcraft jacks 1/4" like the CO11 and CO12A also
Remember
Part Number: HR9263
Switchcraft 1/4" Mono 2 Conductor Thick Panel Mount Jack
Switchcraft #151 1/4" Mono 2 Conductor Thick Panel Mount Jack w/Cable Clamp Nickel Finish, Nut + Washer Since decades the original stock part of many US made guitar classics. made in USA (also known as p/n EP0151)
Remember
Part Number: SC-151
Switchcraft, STEREO 1/4" phone plug, RIGHT ANGLE - 238X
Original Switchcraft, stereo, durable metal version - 238X
Remember
Part Number: CO238X
Internal Lock Washer for Lamp Holder with 1/2" bushing
Internal Lock Washer for Lamp Holder with 1/2" bushing like our FPLA, See "Similar products" lamp holder and nut not included
Remember
Part Number: HR9264
Switchcraft #228 1/4" Mono 2 Conductor RIGHT-ANGLE Plug
Switchcraft Type 228 1/4" plug - 1/4" Mono 2 Conductor RIGHT ANGLE Plug, flat version Nickel Metal Handle w/Solder Lugs & Cable Clamp ¼" Mono 2-Conductor right angle plug, flat version Solder Lugs & Cable Clamp Switchcraft Heavy duty...
Remember
Part Number: SC-228
Switchcraft 1/4" Mono 2 Conductor Cable Mount Plug,
Switchcraft Type 280 1/4" plug - 1/4" Mono 2 Conductor Cable Mount Plug, Nickel Metal Handle w/Solder Lugs & Cable Clamp the music industry standard instrument cable plug since the 1950s.>7h2> still the benchmark, still made in Chicago,...
Remember
Part Number: SC-280
Switchcraft A3M A Series 3 Pin XLR Male, Silver Pins, Nickel, bulk
Switchcraft A3M A Series 3 Pin XLR Male Cable Mount, Silver Pins, Nickel, bulk the music industry microphone cable connector since the 1970s. still the benchmark, still made in Chicago, IL, USA CONSTRUCTION : Sturdy, die-cast zinc with...
Remember
Part Number: SC-A3M
SWITCHCRAFT #14B, 1/4" Phone Jack, Stereo, shorting
SWITCHCRAFT 14B 6.3mm Stereo 3 Conductor Jack w/Nut & Washer, Double Closed shorting Circuit Litte Jax series metal, stereo, shorting, 3/8" bushing, includes nut & washer manufactured in USA used by Fender: Footswitch jack Prosonic...
Remember
Part Number: CO14B
Switchcraft 380 1/4" Mono SHORT 2 Conductor Cable Mount Plug,
Switchcraft Type 380 1/4" plug - 1/4" SHORT Mono 2 Conductor Cable Mount Plug, Nickel Metal Handle w/Solder Lugs & Cable Clamp the cool short version with 1" handle piece (see p/n SC-280 for the long version) ¼" Mono 2-Conductor straight...
Remember
Part Number: SC-380
Switchcraft #155 1/4" Stereo 3 Conductor Thick Panel Mount Jack
Switchcraft #155 1/4" Stereo Long Threaded Jack 3 Conductor Thick Panel Mount Jack without cable clamp, Black Satin Finish, Nut + Washer can be used mono as well Since decades the original stock part of many US made guitar classics. made...
Remember
Part Number: SC-155
Switchcraft #152B 1/4" Stereo 3 Conductor Thick Panel Mount Jack
Switchcraft #152B 1/4" Stereo 3 Conductor Thick Panel Mount Jack w/Cable Clamp Nickel Finish, Nut + Washer can be used mono as well Since decades the original stock part of many US made guitar classics. made in USA (also known as p/n...
Remember
Part Number: SC-152B
SWITCHCRAFT #13A 1/4" Phone Jack, transfer circuit
metal, mono, switching, 3/8" bushing used for impedance switching in Fender Amps like Prosonic etc.
Remember
Part Number: CO13A
Switchcraft #332AX Old Style MC1M Microphone Connector To 1/4" 2...
Switchcraft #332AX Old Style MC1M Microphone Connector To 1/4" 2 Conductor Phone Jack used to connect old style microphones like Astatic JT30, Turner, Shure, RCA with standard guitar cord. typically used with high-Z bullet microphones by...
Remember
Part Number: SC-332AX
Switchcraft #226 1/4" Mono 2 Conductor RIGHT-ANGLE Plug
Switchcraft Type 226 1/4" plug - 1/4" Mono 2 Conductor RIGHT ANGLE Plug, Nickel Metal Handle w/Solder Lugs & Cable Clamp the music industry standard instrument cable plug since the 1950s. still the benchmark, still made in Chicago, IL,...
Remember
Part Number: SC-226
Switchcraft A3M A Series 3 Pin XLR Female, Silver Pins, Nickel
Switchcraft A3M A Series 3 Pin XLR Male Cable Mount, Silver Pins, Nickel, bulk the music industry microphone cable connector since the 1970s. still the benchmark, still made in Chicago, IL, USA CONSTRUCTION : Sturdy, die-cast zinc with...
Remember
Part Number: SC-A3F
Viewed