Amp-Chassis: JTM45 Style

€59.50 *

In Stock, delivery time approx.1-4 working days (Within Germany)
The delivery times for shipping abroad can be found here.

Part Number: K-ACJTM45
Packaging Size: 16.5x6.3x46.5 cm
Packaging Weight: 0.72 kg
UPC: 4251594912064

NEW STYLE: empty Chassis, fits JTM45 small boc head and also 1x12" or 2x12" combo cabinets... more

Close menu

Product information "Amp-Chassis: JTM45 Style"

NEW STYLE:

empty Chassis, fits JTM45 small boc head and also 1x12" or 2x12" combo cabinets

NOTE: matching gold PLEXI face and backplate are not included. Matching PLEXI Penels can be ordered at K-ACM100FP + K-ACJTM45RP

Material: Aluminium, hardened, 2mm / 5/65"

drilled/cut-outs for:

3x Octalsockets, d=25mm (for EL34 + GZ34)

3x Novalsockets, d=19mm (for ECC83)

2x holes for radial caps like V-3232500R

1x lay-down mains transformer (M50PL)

several holes for upright standing outputtransformer (MJTM45A, M50A), cables etc.

Frontside:

2x Mainsswitch

4x Inputjacks

6x Potentiometer

1x Indictor/Pilot Light

Rearside:

2x Fuseholders

1x IEC-AC-Jack (MBBIEC)

1x Impedance Selector Switch (SW1020)

2x Speakerjacks

H: 64mm W: 432mm (466mm with lips) D: 165mm

Cut out for lay-down mains transfomer M50PL with vintage correct lamination (4-1/2")

Chassis Material:	Alumium
Chassis Version:	With Holes
Chassis Style:	Plexi Style

Safety information...

Responsible person for the EU

Economic operator established in the EU, who ensures that the product complies with the required regulations:

Tube Amp Doctor Musikhandels GmbH

Weinbrennerstr. 1

67551 Worms

shop@tubeampdoctor.com

www.tubeampdoctor.com

Read, write and discuss reviews... more

Close menu

Customer evaluation for "Amp-Chassis: JTM45 Style"

Write an evaluation

Please verify your testimonial by clicking on the link sent to your email after submitting your text.

M50A Ausgangsübertrager für Marshall 50W, 2x EL34, 4+8+16 Ohm

Output transformer for Marshall 50W, 2x EL34, 4+8+16 Ohm

€168.80 *

M50PL Netztrafo für Marshall JTM45 und 50W Plexi Modelle, TAD KIT PLEXI 45

Mains transf. for Marshall JTM45 and 50W Plexi, TAD KIT PLEXI 45

€179.50 *

MJTM45A Übertrager für Marshall JTM45, 2xKT66 mit 4,8,16 Ohm

Output transf. for Marshall JTM45, 2xKT66 with 4, 8,16 Ohms

€179.90 *

TAD Amplifier Chassis Stand

€245.00 *

K-ACJTM45RP Plexi Rearpanel für 45 Watt Kit, fits

Plexi Rearpanel for 45 Watt Kit, fits

€24.80 *

K-CJTM45C 2x12" Combogehäuse Plexi MBB Style für 18W / JTM45 Black Levant

2x12" Combo-Cabinet Plexi MBB Style for 18W / JTM45

€735.00 *

K-CJTM45H Topteilgehäuse für 18W / JTM45 Kit Small Box Black Levant

Head-Cabinet for 18W / JTM45 Kit Small Box

€439.00 *

HR9290 Käfigmutter für TAD Chassis (Plexi Kit) oder Marshall© JPM, JCM Chassis

Cage-nut for TAD Aluminum Chassis or Marshall© JPM, JCM Chassis

€0.90 *

HR9291 Schraube für TAD Chassis (Plexi Kit) oder Marshall

Screw for TAD Aluminum Chassis or Marshall© Chassis

€0.60 *

K-ACM100FP Plexi Front-Panel für 100 Watt / JTM45 Kits

Plexi Front-Panel fits on 100 Watt Kits

€24.80 *

K-ACM18W Amp Chassis für 18 Watt Plexi Kit

Amp Chassis for 18 Watt Plexi Kit

€59.50 *

Plexi Front-Panel fits on 100 Watt Kits

€24.80 *

Plexi Rearpanel for 45 Watt Kit, fits

€24.80 *

mounting clamp Ø = 35 mm

€1.49 *

MBBIEC Kaltgerätenetzeinbaubuchse, IEC, Snap-In, für alle Plexi Style Chassis

AC-Chassisjack IEC-style, for all Plexi Style chassic

€6.40 *

Mains transf. for Marshall JTM45 and 50W Plexi, TAD KIT PLEXI 45

€179.50 *

MK Marshall Style Knopf mit Schraube, schwarz +gold, für 6,3 Achse

Marshall Style Knob with screw, 6,3 mm Axis, Black with Gold cap

€2.59 *

125C1A Siebdrossel 4H, 90 Ohm, für Fender®, Boogie®

Choke 4H, 90 Ohm, for Fender®, Boogie®

€39.95 *

V-5050500R 50+50uF 500V Elektrolytkondensator, radial 35x75mm

50+50uF 500V electrolytic capacitor, radial 35x75mm

€9.65 *

Output transformer for Marshall 50W, 2x EL34, 4+8+16 Ohm

€168.80 *

turret board: JTM45 Plexi Style

€36.00 *

Cage-nut for TAD Aluminum Chassis or Marshall© JPM, JCM Chassis

€0.90 *

CO1050 Klinkenbuchse 6,3 mm, mono, Lötösen, kurzschließen

1/4"Phone Jack, plastic with chrome nut, mono, shorting

€2.00 *

Screw for TAD Aluminum Chassis or Marshall© Chassis

€0.60 *

PLEXI-Amp Red Pilot light

€13.99 *

SW1021 Impedanzwahlschalter (z.B. für TAD Plexi Amp Kits)

Impedance selector switch (used in TAD Plexi Kits)

€12.95 *

HR9250 Unterlegscheibe mit Zahnung und zwei Bohrungen

Terminal Solder Lockwasher Lugs

€0.50 *

1k / 5W Enamel Resistor

€2.50 *

SW1003-M Netzschalter 2-fach-AUS, Metallhebel

Power switch, DPST, double ON/OFF, metal toggle

€12.50 *

S9CS Novalfassung, Keramik, mit Kragen und Abschirmhülse

Noval socket, Ceramic, with skirt and shield

€1.59 *

HR3130 SCHRAUBE für Oktalfassungen, Boards, Kondensatorschellen, passend zu Mutter HR3131

SCREW for 8-pin sockets, fiberboards, cap clamps, fits to nut HR3131

€0.40 *

FFH Sicherungshalter für Fender Amps1960er-1980er

Fuse-Holder (Fender style of 1960s - 80s)

€4.97 *

Output transf. for Marshall JTM45, 2xKT66 with 4, 8,16 Ohms

€179.90 *

HR3141 MUTTER mit Zahnscheibe für Novalfassungen, passend

NUT: kep nut for 9-pin sockets, fits to screw HR31

€0.60 *

HR3131 MUTTER mit Zahnscheibe für HR3130+HR3060

NUT: Kep Nut for Screws HR3130+HR3060

€0.60 *

HR3121 MUTTER mit Zahnscheibe für FCSC + HR3050 + HR3120

NUT: Kep Nut for Chassis Strap Bolt + Speaker Screw

€0.60 *

SETP-M-JTM45-CTS CTS Poti Set, Upgrade für Marshall JTM45 + TAD Amp Kit Plexi JTM45

CTS Poti set, Upgrade for Marshall JTM45 + TAD Amp Kit Plexi JTM45

€48.65 *

V-8475 8uF @ 475V 13x25mm Elektrolytkondensator, axial, 105°C

8uF @ 475V 13x25mm electrolytic capacitor, axial, 105°C

€2.18 *

V-3232500R 32+32uF 500V Elektrolytkondensator, radial 35x50mm

32+32uF 500V electrolytic capacitor, radial 35x50mm

€9.60 *

V-22500 Elko 22uF @ 500V axial, 16x32mm Elektrolytkondensator 105°C

22uF @ 500V 16x32mm axial capacitor 105°C

€2.89 *

S9CSK-BT VT9-ST-C Belton Novalsockel, Lötösen für chassis mount

VT9-ST-C Belton Noval socket, solder lugs with skirt

€1.99 *

S8M-BT VT8-ST Belton Oktalfassung, Micalex, Lötösen, einteilig

VT8-ST Belton Octal socket, Micalex, solder lugs

€2.48 *

Diode, 1N4007, 1A, 1000V

€0.50 *

HR9012 Gummitülle, Kabeldurchführung z.B. für TAD Chassis

Rubber grommet for TAD Chassis, 12mm

€0.80 *

HR1021 Spezialmutter für Impedanzwahlschalter SW1021

Special nut for impedance selector switch SW1021

€0.95 *

A1M LOG ALPHA Pot

€2.75 *

S8C-1 Oktalfassung, Keramik, Lötösen, einteilig mit Montageflansch

Octal socket, Ceramic, solder lugs, one-piece with fixed mounting...

€1.95 *

RV-4AB3C1B 4AB3C1B TAD Hallspirale 2x2 Federn

4AB3C1B TAD Reverb Can 2x2 Springs

€32.50 *

MPL Marshall Kontrolleuchte, quadratisch, rot, 6.3V

Marshall Pilot light, square type, red, 6.3V

€9.95 *

M100D Siebdrossel f. Marshall 50W und 100W, z.B für 2203

Choke for Marshall 100W / 50W, for 2203, 2204, 220

€55.00 *

HR3140 SCHRAUBE für Novalfassungen, passend zu Mutter HR3141

SCREW for 9-pin sockets, fits to nut HR3141

€0.40 *

Amp Chassis for 18 Watt Plexi Kit

€59.50 *

Plexi Front-Panel fits on 100 Watt Kits

€24.80 *

Output transformer for Marshall 50W, 2x EL34, 4+8+16 Ohm

€168.80 *

K-ACM100W Amp Chassis für 100 Watt Plexi Kit

Amp Chassis typical for 100 Watt Plexi Kit

€96.00 *

K-ACJTM45NH Amp Chassis für 45 und 18Watt Plexi Kit, OHNE BOHRUNGEN

Amp Chassis typical for 45 and 18 Watt Plexi Kit,

€48.50 *

Mains transf. for Marshall JTM45 and 50W Plexi, TAD KIT PLEXI 45

€179.50 *

Output transf. for Marshall JTM45, 2xKT66 with 4, 8,16 Ohms

€179.90 *

K-ACM100WNH Amp Chassis für 100 Watt Plexi Kit, OHNE BOHRUNGEN

Amp Chassis typical for 100 Watt Plexi Kit, NO HOLES

€75.51 *

K-ACPRV Amp Chassis für Blackface Princeton Rev. Style AA1164

Amp Chassis for Blackface Princeton Rev. Style AA1164

€59.95 *

Amp-Chassis: Deluxe Reverb AB763 Style

€66.00 *

MJTM45RP Netztrafo für Marshall JTM45 Reissue Upgrade

Mains transf. for Marshall JTM45 Reissue upgrade

€159.50 *

K-ACM100FP-M Plexi Front-Panel für 100 Watt MASTER VOLUME

Plexi Front-Panel fits on 100 Watt MASTER VOLUME

€24.80 *

turret board: JTM45 Plexi Style

€36.00 *

Amp-Chassis: Tweed Champ Style 5F1

€67.95 *

Amp-Chassis: Brownface Deluxe 6G3 Style

€59.95 *

Amp-Chassis: Tweed Deluxe 5E3 Style

€79.94 *

Choke for Marshall 100W / 50W, for 2203, 2204, 220

€55.00 *

Amp-Chassis: Tweed Bassman 5F6 Style

€99.95 *

Amp-Chassis: Blackface Super Reverb Style AB763

€72.99 *

Amp-Chassis: Tweed Princeton 5F2

€79.94 *

Amp-Chassis: Stand Alone Reverb Unit 6G15

€68.50 *

Choke 4H, 90 Ohm, for Fender®, Boogie®

€39.95 *

Marshall Style Knob with screw, 6,3 mm Axis, Black with Gold cap

€2.59 *

MJTM18WA Ausgangsübertrage für 18W Plexi Kit

Output transf. for 18W Plexi Kit

€111.90 *

Amp-Chassis: Blackface Twin Reverb Style AB763

€78.00 *

€0.90 *

Amp-Chassis: Tweed Twin Low Power Style 5E8

€99.95 *

K-ACPRV-NH Amp Chassis für Blackface Princeton Rev. Style AA1

Amp Chassis for Blackface Princeton Rev. Style AA1

€48.00 *

Amp-Chassis: Tweed Super 5F4 / PRO 5E5A / Bandmaster 5E7

€99.95 *

Plexi Rearpanel for 45 Watt Kit, fits

€24.80 *

M50PS Netztrafo für Marshall 50W, stehender Einbau

Mains transf. for Marshall 50W, upright standing

€177.00 *

32+32uF 500V electrolytic capacitor, radial 35x50mm

€9.60 *

Amp-Chassis: Tweed Twin High-Power 5F8A Style

€99.95 *

K-ACCVC Amp Chassis für Blackface Vibrochamp Amp AA764 Sty

Amp Chassis for Blackface Vibrochamp Amp AA764 Sty

€118.41 *

K-ACM18-FP Plexi Front Panel für 18 Watt-Kit

Plexi Front Panel fits on 18 Watt Kit

€24.80 *

M100A Ausgangsübertrager für Marshall 100W, ab Bj.''66 auch für JMP, JVM 800

Output transformer for Marshall 100W amps, used since 1966 for all...

€187.50 *

K-ACM100RP Plexi Rear-Panel für 100 Watt Kits

Plexi Rear-Panel fits on 100 Watt Kits

€24.80 *

AC-Chassisjack IEC-style, for all Plexi Style chassic

€6.40 *

Amp-Chassis: Cap Can Cover

€20.00 *

Faceplate: Princeton Rev Style AA1164 Amp Kit

€32.00 *