window.ga=window.ga||function(){(ga.q=ga.q||[]).push(arguments)};ga.l=+new Date; ga('create', 'UA-177780411-1', 'auto'); ga('set', 'forceSSL', true); ga('set', 'anonymizeIp', true); ga('require', 'displayfeatures'); ga('require', 'cleanUrlTracker'); ga('require', 'outboundLinkTracker'); ga('require', 'ec'); ga('send', 'pageview'); ga('set', 'nonInteraction', true); setTimeout("ga('send', 'event', 'read', '20 seconds')", 20000); Buy Amp Cables & Connectors | Tube Amp Doctor

Cables, Jacks & Plugs

Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
 
from to

Cable

  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
4 From 6
No results were found for the filter!
Tube Amp Doctor GmbH
CB3035 Push-back-wire (solid):  Gelb, 1m
Push-back-wire (solid): yellow, 1m
22awg. as used by Fender® solid core Material: tinned copper

€3.20 *
Remember Part Number: CB3035
Tube Amp Doctor GmbH
CB3125 Push-back-wire (stranded):  Schwarz, 1m
Push-back-wire (stranded): Black, 1m
stranded wire, 18awg. , originally used for Speaker wiring in Fender® amplifiers and cabinets, black. Material: tinned copper

€3.86 *
Remember Part Number: CB3125
Tube Amp Doctor GmbH
CB3120 Push-back-wire (stranded):  Weiß, 1m
Push-back-wire (stranded): White, 1m
stranded wire, 18awg. , originally used for Speaker wiring in Fender® amplifiers and cabinets, white Material: tinned copper

€3.86 *
Remember Part Number: CB3120
Tube Amp Doctor GmbH
CB3225 Push-back-wire, 22awg (stranded):  Schwarz, 1m
Push-back-wire, 22awg (stranded): Black, 1m
stranded wire, 22awg. , recommended for Guitar and Bass wiring in Fender® Guitars Material: tinned copper

€3.86 *
Remember Part Number: CB3225
Tube Amp Doctor GmbH
CB3220 Push-back-wire, 22awg (stranded):  Weiß, 1m
Push-back-wire, 22awg (stranded): White, 1m
stranded wire, 22awg. , recommended for Guitar and Bass wiring in Fender® Guitars Material: tinned copper

€3.86 *
Remember Part Number: CB3220
Tube Amp Doctor GmbH
CB8001 Schaltlitze - PVC, Grün-Gelb 1,00 mm²
PVC-Stranded wire, AWG 18, green/yellow
PVC-Stranded wire, high flexible, LiYv, 1.0 mm², AWG 18, green/yellow, outer Ø 2.1 mm For internal wiring of amps

€1.50 *
Remember Part Number: CB8001
Tube Amp Doctor GmbH
Z-RPL RCA/Cinch Stecker für ältere Fender Fußschalter
RCA Plug, chrome, for older Fender Footswitch
small RCA plug in orig. style for vintage Fender Reverb cables, vintage footswitch (FFS-VC) etc. Only this small sized, open type plug prevents that the plug and cable would stand over the boarder in Fender Amp cabinets. replaces...

€1.40 *
Remember Part Number: Z-RPL
Switchcraft, Inc.
Z-RJ RCA/Cinch Einbaubuchse für Fender Fußschalter, Reverb
RCA/Cinch Jack for vintage Fender Footswitch, Reverb
Panelmount jack with the speical size fitting the classic blackface or silverface Fender Back-Panels and for the TAD Blackface Amp-Kits. used for the footswitch and reverb cable connection. Original Switchcraft! Supply content: suitable...

€4.20 *
Remember Part Number: Z-RJ
Tube Amp Doctor GmbH
CO1034 Rote Mutter für Klinkenbuchse CO1030 + CO1060
RED hex-nut for CO1030 + CO1060
RED hex-nut for CO1030 + CO1060 Picture 2 shows jack CO1030 with nut CO1034

€0.98 *
Remember Part Number: CO1034
Tube Amp Doctor GmbH
Z-GE3 Schuko Netzstecker, schwarz
Schuko Mains Plug, black
Type F (German 2-pin, side clip earth) CEE 7/4 (German "Schuko" 16 A/250 V earthed) , black

€2.62 *
Remember Part Number: Z-GE3
Tube Amp Doctor GmbH
PC263 Schuko-Netzkabel 3 m, schwarz
Schuko- AC-Cord, 10ft, black
3 pronge, 18awg., blank ends. , d=6.4mm Made in Germany!

€7.90 *
Remember Part Number: PC263
Tube Amp Doctor GmbH
PC265 Schuko-Netzkabel 3 m, schwarz
Schuko-AC-Cord, 10, black
3 pronge, 16awg., IEC connector

€11.19 *
Remember Part Number: PC265
Tube Amp Doctor GmbH
CB4011 Schaltdraht, Kupferdraht verzinnt Ø 0,91mm / 33 A,
SOFT TINNED COPPER WIRE Ø 0,91mm / 33 A,
SOFT TINNED COPPER WIRE Ø 0,91mm / 33 A, DIAMETER : 0.91MM (20SWG) TOLERANCE : +/- 1% ELONGATION: 22% MINIMUM RESISTANCE : 26.81 OHMS/KM STANDARD RESISTANCE @ 20 DEG C. YIELD : 5.83KGS/1000M SURFACE FINISH: THE WIRE SHALL BE BRIGHT,...

€1.07 *
Remember Part Number: CB4011
Tube Amp Doctor GmbH
HR9255 Steckverbinder zum Lautsprecheranschluss
Solderless Terminals, female, for speaker, 1/4" fits Jensen,...
Solderless Terminals, female, for solderless speaker connection, 1/4" , 1 piece. fits standard terminaks of Jensen, Celestion etc.

€0.25 *
Remember Part Number: HR9255
Tube Amp Doctor GmbH
HR9256 Steckverbinder male für HR9255
Solderless Terminals, male, for HR9255, 1/4"
Solderless Terminals, male, for HR9255, 1/4" , 1 pc.

€0.50 *
Remember Part Number: HR9256
Tube Amp Doctor GmbH
CO238 Winkel-Klinkenstecker STEREO 1/4
STEREO 1/4" phone plug, RIGHT ANGLE
stereo, rather flat metal version, screwed

€2.95 *
Remember Part Number: CO238
Switchcraft, Inc.
CO14B SWITCHCRAFT #14B,  Klinkenbuchse 6,3 mm, Stereo
SWITCHCRAFT #14B, 1/4" Phone Jack, Stereo, shorting
SWITCHCRAFT 14B 6.3mm Stereo 3 Conductor Jack w/Nut & Washer, Double Closed shorting Circuit Litte Jax series metal, stereo, shorting, 3/8" bushing, includes nut & washer manufactured in USA used by Fender: Footswitch jack Prosonic...

€10.70 *
Remember Part Number: CO14B
Switchcraft, Inc.
CO11 SWITCHCRAFT #11 Klinkenbuchse 6,3mm ( 1/4") Metall, offen, mono
SWITCHCRAFT #11 1/4" (6,3mm) Metal Phone Jack, open, mono
the original SWITCHCRAFT (USA) phone jack. with sturdy contacts, insulating washers and original US bushing (matching nuts is included). the standard open phone jack since decades.

€3.20 *
Remember Part Number: CO11
Hint!
Switchcraft, Inc.
CO12A SWITCHCRAFT #12A Klinkenbuchse mono 6,3 mm, Metall
SWITCHCRAFT #12A 1/4" Mono Phone Jack
SWITCHCRAFT 1/4" Phone Jack, metal, mono, shorting, 3/8" bushing This jack was and still is the standard in guitar amps in the US! Still in use by Fender and many others! Recommended for most older Fedner amps. Also used in the TAD Tweed...

€3.61 *
Remember Part Number: CO12A
Switchcraft, Inc.
CO12A-L SWITCHCRAFT #12A-L  Klinkenbuchse 6,3 mm, Metall, langes Gewinde
SWITCHCRAFT #12A-L 1/4" Phone Jack, with long bushing
SWITCHCRAFT 1/4" Phone Jack L12A, with extra long bushing (9,00mm / 0.375") identical withj Swichcraft L11 if shorting contact is not connected

€3.90 *
Remember Part Number: CO12A-L
Switchcraft, Inc.
CO12B SWITCHCRAFT #12B  Klinkenbuchse 6,3 mm, Stereo, Metall
SWITCHCRAFT #12B 1/4" Phone Jack, Stereo
SWITCHCRAFT 6.3mm / 1/4" Stereo 3 Conductor Jack w/Nut & Washer, 7,0mm / .276" Bushing, Double Open Circuit metal, stereo, 3/8" bushing often used as INPUT on quality stomp boxes US-MADE Picture 4 shows the difference in length between...

€3.90 *
Remember Part Number: CO12B
Switchcraft, Inc.
CO13A SWITCHCRAFT #13A Klinkenbuchse 6,3 mm, Metall, mit Umschaltkontakt
SWITCHCRAFT #13A 1/4" Phone Jack, transfer circuit
metal, mono, switching, 3/8" bushing used for impedance switching in Fender Amps like Prosonic etc.

€12.20 *
Remember Part Number: CO13A
Switchcraft, Inc.
SC-152B Switchcraft #152B Endpin, Zargen Klinkenbuchse 6,3mm , Stereo
Switchcraft #152B 1/4" Stereo 3 Conductor Thick Panel Mount Jack
Switchcraft #152B 1/4" Stereo 3 Conductor Thick Panel Mount Jack w/Cable Clamp Nickel Finish, Nut + Washer can be used mono as well Since decades the original stock part of many US made guitar classics. made in USA (also known as p/n...

€15.30 *
Remember Part Number: SC-152B
Switchcraft, Inc.
SC-155 Switchcraft #155 Endpin, Zargen Klinkenbuchse 6,3mm , Stereo
Switchcraft #155 1/4" Stereo 3 Conductor Thick Panel Mount Jack
Switchcraft #155 1/4" Stereo Long Threaded Jack 3 Conductor Thick Panel Mount Jack without cable clamp, Black Satin Finish, Nut + Washer can be used mono as well Since decades the original stock part of many US made guitar classics. made...

€17.20 *
Remember Part Number: SC-155
4 From 6

Cables and Connectors 

Few topics stir up as much discussion in musician circles as the selection of the "right" cable. While some are happy to find a suitable piece of wire in a scrap bin, others talk about the "cable tone." We understand the special needs for wires and amp connectors and offer our customers a wide selection. Power cables, amp plugs, and connectors are always in stock, and we can also accommodate special requests – all for the amp!

Our Cables – High-Quality Technology at Fair Prices

We offer our customers a wide range of suitable cable and adapter options. Here are the main categories briefly outlined:

Instrument Cables

Instrument wires transmit the signal from guitar, bass, and other instruments towards the amplifier. For the clearest and most distinct signal possible, instrument cables feature special shielding and are always equipped with jack plugs.

Patch Cables

The little siblings of instrument wires are patch cables. They are used to connect multiple effects pedals or similar devices together in a space-saving and orderly manner, keeping the signal path short and clear.

Power Cables

Electric guitar without power? Exactly. Power cables and IEC connectors supply guitar amplifiers, effects pedals, and accessories with the necessary mains voltage. It's essential to consider the correct wire sizing and firm, secure insulation. No question with our wires!

Speaker Cables

Speaker cables come in various forms: with connectors, flat connectors, as push-back wire, or angled plug variants. A clean and as short as possible wire run with the appropriate connector ensures the best results and is a prerequisite for fat sound, both in amplifier-cabinet combinations and combos from Fender, Marshall, and the like!

Other Cables

Apart from the mentioned variants, we also offer other cables as needed: pickup wire, braided cable, reverb cable, harp microphone wire, and many more!

Connectors

Cables need to be plugged in – that's where our connectors and sockets come in. In our shop, we offer all the suitable and necessary connectors needed to build a good, powerful, and great-sounding amplifier:

We provide input jacks, jack sockets, or DC sockets for 9V effect devices, as well as Fender stereo jacks, IEC power sockets, or classic 6.3 mm jack plugs.

Especially important when replacing a defective socket and other connectors is the correct mounting form. Therefore, we have adapted to various manufacturers and offer suitable sockets for almost any tube amplifier!

Cables and connectors – we stay connected

Our passion for pure sound and real music remains undiminished even after over 25 years in the market. Over the years, we have not only acquired a huge range of over 650,000 components but also never lost our love and enthusiasm for good technology. We offer our goods in wholesale and retail and provide our customers with advice and assistance.

Viewed