No results were found for the filter!

for 1/4" / 6.3mm shaft, with set-screw
Remember
Part Number: VKP

black plastic amp corner like used with the VOX AC30® and many more VOX® amps from 1966 to 2004 and Orange® amplifier models since the 1960's till today.
Remember
Part Number: HR2050

black amp handle VOX style, fits VOX® for AC30, AC15, AC50 and many other amps includes authentic slotted screws and t-nuts for mounting. new Super Quality: approved tested load capacity 40kg !! total length: 190mm mounting loop hole...
Remember
Part Number: VH

The cover only has one handle cut-out in the centre, the 2 cut-outs for the outer handles are missing. COVER for vintage and classic reissues VOX AC30 and AC30 TOP BOOST combo amps Custom made amplifier covers in premium quality with TAD...
Remember
Part Number: B-VRDC

primary used by Vox®, Hiwatt®, Laney® width: 136cm Made in USA Various options/lengths can be ordered. Goods by the metre will be shipped in one piece and additional shipping costs do apply (oversize surcharge) Available lengths without...
Remember
Part Number: VHTB-100

Choke 100mA, 19H, 500 Ohms for almost all "JMI Product" and "VOX Product" AC30. Perfect Replacement Custom made by Dagnall in Europe for TAD! Lamination: 3", Stacking 1" Overall dimensions: L x W x H: 107mm (incl. lugs) x 60mm x 66mm...
Remember
Part Number: AC30D

COVER for vintage and classic reissues VOX AC30 and AC30 TOP BOOST combo amps Custom made amplifier covers in premium quality with TAD logo made of padded polyester. dimensions: 53,0 x 69,0 x 26,5 cm fits also VOX AC30CC2, AC30CC2X, AD120VT
Remember
Part Number: VRDC

primary used by Fender® '60-'63 width: 138 cm Made in USA Various options/lengths can be ordered. Goods by the metre will be shipped in one piece and additional shipping costs do apply (oversize surcharge) Available lengths without...
Remember
Part Number: VTF-100

original footswitch for vintage VOX AC30 JMI DISCONTINUED ITEM! No longer available! RECOMMEND replacement item: FFSR or SW3010
Remember
Part Number: VXFS

gold colour t-strip separating fret cloth and tolex section on front side of the VOX AC30 amp cut piece for VOX AC30 (75cm)
Remember
Part Number: VGFS

gold colour t-strip separating fret cloth and tolex section on front side of the VOX AC30 amp Height: 6,2mm width: 10mm NOTE: no returns or refund on custom cutted products
Remember
Part Number: VGFSM

Original VOX Power transformer for the AC15 from the "C" series like AC15C1, AC15C2 Primary: 0V Black 230V White Secondary: HV Orange 0V White HV Orange 6,3V Yellow 0V Yellow 25V Red 0V Red
Remember
Part Number: AC15PC1

Mains transf. for Vox AC15 60´s with EZ81 rectifier Fits also the AC15HW transformer (022-1020042306R) of the handwired AC15HTVH Lamination: 3 3/4", Stack: 2" Mounting: 79x64mm Center holes distance: 71mm Primary: 0V red 115V white 160V...
Remember
Part Number: AC15P

VOX Power transformer for the AC15 from the "CC" series like AC15CC1, AC15CC1X Upgrade, supports all primary voltages. Mounting: 79x64mm Primäry 0V Red 100V White 120V Blue 230V Black 240V Green Secondary 285V 150mA purple 0V grey 285V...
Remember
Part Number: AC15PCC

MAINS: VOX® AC 30 built till 1969, supports GZ34 tube rectifier Lamination: EI126/41, Mounting on 105x84mm In contrast to the original PT with 5" lamination the mounting holes of the chassis may need some "massage" to fit the AC30P. No...
Remember
Part Number: AC30P

MAINS: VOX® AC 30 «Rose Morris» version, without GZ34 support Also used in the AC30 REISSUE LIMITED without 5AR4 rectifier tube Lay down type, lamination EI96 Mounting on 79x64mm NEW VERSION! Primary 0V Black 120V Orange 220V White 230V...
Remember
Part Number: AC30PRM

upgrade power transformer for the AC30 from the "CC" series like AC30CC1, AC30CC2, AC30CCH Made in Europe. Delivers a stable voltage for a punchy and thick tone with a clear attitude! 117V and 230V/240V operation possible Superior...
Remember
Part Number: AC30PCC

MAINS Transformers for the UK at Marshall made VOX® AC30TB and AC30TBX, Reissue, Model Nr. AC30/6TB NEW VERSION, WITH SHROUD! 117V and 230V/240V operation possible (see picture #3) Lamination: 3 3/4" mounting on 3 1/8" x 2 1/2" perfect...
Remember
Part Number: AC30PRE

until further notice undeliverable! Power Transformer for the VOX® Conqueror, correct voltages and size: Primary: 0 V Black 115 V Brown 160 V Blue 205 V Yellow 225 V Orange 245 V Red Screen Pink Secondary: PA Red 0 V Black PA Red Pre...
Remember
Part Number: VCONQ

Original VOX Power transformer for the NT2H 220/230V
Remember
Part Number: VNT2-P

Original VOX Power transformer for the Vox NT50H und 50H-G2
Remember
Part Number: VNT50H-P

Mains transf. for Vox Pacemaker Primary: 230V Black 0V White Secondary: 300V@100mA Red 0V Green/Yellow 300V Red 3,15V@3,2A Green 0V Green/Yellow 3,15V Green this transformer is usually no stock type but will be made on order, typical...
Remember
Part Number: 8050476

The corners are suitable for AC15C1 / AC30C2 These corners fit the current models of the AC15/AC30 'C series' / AC15C1_1X_H / AC30C2_2X_H models from year of manufacture/(start of the AC_C series) end of 2009/2010.
Remember
Part Number: HR2055

output transformer for the VOX AC15 REISSUE from UK Production. Replaces TXOP00008. (294-310) Upgrade with 4, 8 and 16 Ohms! 2x EL84 Class A, 15 Watt, Raa ca. 8k Ohm Custom made by Dagnall in Europe for TAD! Can also be used for the...
Remember
Part Number: AC15ARE-1
Top seller
Viewed