Tweed One-5, 5F1 Style Amp-Kit

KIT-TWCHMP Tweed One-5, 5F1 Style Amp-Kit

From €455.00 *

*Prices incl. VAT plus shipping costs

In Stock, delivery time approx.1-4 working days (Within Germany)
The delivery times for shipping abroad can be found here.

Part Number: K-TWCHMP-NC
Packaging Size: 22x22x31 cm
Packaging Weight: 3.7 kg
UPC: 4251594902997

Amp Kit Tweed One-5, 5F1 Style with ca. 5 watt power. This Amp Kit is based on the... more

Close menu

Product information "Tweed One-5, 5F1 Style Amp-Kit"

Amp Kit Tweed One-5, 5F1 Style with ca. 5 watt power.

This Amp Kit is based on the legendary Fender Tweed Champ®

The Fender Tweed Champ® of the late 50s is a single-ended Class A amp known for its sweet tone.

It is a famous recording amp of many guitarists, great and highly regarded as blues-harmonica-amp as well.

The Tweed One-5 with the little 8" speaker (also available with a 12" cabinet version) provides that stunning tone from bell-like cleans to dirty overdrive you would not except from this little fellow.

TAD Logo included

Power: ca. 5 Watt

Impedance: 4 Ohm

Tubes: 1x 12AX7A-C / ECC83, 1x 6V6GT-STR, 1x 5Y3GT / 6087

Available variants:

K-TWCHMP-NC:

Just the kit without a tweed cabinet:

Measure: 6,7cm height x 22,3cm width x 10,5cm depth

Total weight: ca. 2 kg

K-K-TWCHMP:

Kit incl. 1x8" tweed cabinet with nitro-aged tweed and fingers interlocked

wood out of american pine for a authentic vintage tone.

Cabinet: K-CCHMP

Measure: 33cm height x 37cm width x 16,5cm depth

Total weight: ca. 8 kg (without speaker)

K-TWCHMP-SP

Kit, tweed cabinet and speaker.

Nothing is missed here.

The speaker is our recommendation

and perfectly matched to the kit.

As an extra we give a discount of 10% to the speaker.

The discount is already factored in the total price

and only available for this version!

Speaker: 1x Jensen P8R 25 Watt 4 Ohm #LJEP8R-4

Cabinet: K-CCHMP

Measure: 33cm height x 37cm width x 16,5cm depth

Total weight: ca. 9,6 kg

K-K-TWCHMP-10:

Kit incl. 1x10" tweed cabinet with nitro-aged tweed and fingers interlocked

wood out of american pine for a authentic vintage tone.

Cabinet: K-CCHMP-10

Measure: 33cm height x 37cm width x 16,5cm depth

Total weight: ca. 8 kg (without speaker)

K-TWCHMP-SP

Kit, tweed cabinet and speaker.

Nothing is missed here.

The speaker is our recommendation

and perfectly matched to the kit.

As an extra we give a discount of 10% to the speaker.

The discount is already factored in the total price

and only available for this version!

Speaker: 1x Jensen P10R 25 Watt 4 Ohm #LJEP10R-4

Cabinet: K-CCHMP

Measure: 33cm height x 37cm width x 16,5cm depth

Total weight: ca. 10 kg

K-K-TWCHMP-12:

Kit incl. 1x12" tweed cabinet with nitro-aged tweed and fingers interlocked

wood out of american pine for a authentic vintage tone.

Cabinet: K-CCHMP-12

Measure: 40,5cm height x 51cm width x 24cm depth

Total weight: ca. 9,5 kg (without speaker)

K-TWCHMP12-SP

Kit, tweed cabinet and speaker.

Nothing is missed here.

The speaker is our recommendation

and perfectly matched to the kit.

As an extra we give a discount of 10% to the speaker.

The discount is already factored in the total price

and only available for this version!

Speaker: 1x Jensen P12R 25 Watt 4 Ohm #LJEP12R-4

Cabinet: K-CCHMP-12

Measure: 40,5cm height x 51cm width x 24cm depth

Total weight: ca. 12 kg

Otherwise, everything is included:

TAD Premium Selected Tubes:

1x #RT001 12AX7A-C / ECC83, 1x #RT831 6V6GT-STR, 1x #RT503 5Y3GT / 6087,

eyeletboards, ceramic sockets, mounting materials, full size pots, knobs, Orange Drop caps,

carbon composition resistors, cloth-covered wire, chrome chassis, transformers etc.

Please note:

This amp kit is designed for a mains voltage of 220/230/240V volts only.

Both the type of plug used and the technical design comply with the European standard.

Operation in other mains voltages is not possible.

WARNING:

Please note that the amp-kit are not a beginners' project but for experienced amp builders!

Voltages inside tube amplifiers can exceed 500V and can cause serious damage and can even kill!

Ampkit Style:	Tweed Style
Ampkit Power:	5 Watt

Documents...

Available downloads:

Read, write and discuss reviews... more

Close menu

Customer evaluation for "Tweed One-5, 5F1 Style Amp-Kit"

From: Rob Bergin On: 20 Aug 2021

top quality

Great kit for this classic amp....I built mine into a wide-panel style plywood cab with a Jensen 8" and it sings!
Eexcellent components,from the chassis to the traditional carbon comp resistors build into a great sounding amp.
The instructions are not as clear as with the Mojotone kits and I would recommend that the mounting holes for the phenolic circuit board are drilled before its loaded, taking into account where the components are going to be placed.
A nice option with these kits would be to supply without tubes for those who prefer to use others,NOS etc or who have a good few spares to use up!
I most certainly intend to build one more with a 10" speaker next time.
....

From: Milorad Milivojevic On: 5 May 2019

Very good amp. Easy to bild, good quallity parts. Sound is great with various speakers, 1 x 8", or even 4 x 12". I have made head version, my own cabinet design.

From: Adomas On: 14 Jun 2016

My first attempt to assemble an amp. What can I say 8 hours later I have fantastic amp of the dreams. Would recommend to anyone. The tone is fantastic, the parts used are great. Everything about the amp is great.

The instructions while not difficult, but it it's your first project like this will take some time and additional research to complete.

Will buy my next amp from TAD, definitely!

From: didier joris On: 27 May 2006

I received the kit within two weeks and was impressed by the quality of the parts and cabinet!! I assembled it in about 6 hours with the schematic that i received with it and once assembled, flipt the switch and there was the sound of the past. Nice sound, really, i din't expect such a loud amplifier for a 4 Watt combo!!

Great job guys, keep up the good kits!

From: George Dimitropoulos On: 13 Jul 2004

I receive the kit here in Greece, and everything was perfect in a great packaging!

At first the quality of the cabinet impressed me and then all the components was looking great

separated in different bags and checked one by one in the part list.

I start building the kit and it took me about 5 hours. It was pretty easy with the schematics.

When it was finished I plug my '78 Ibanez PF300 and at first I was really shocked from the bass response.

I thought that the sound will be thin BUT especially with the neck pickup it is huge with plenty of bass (great blues tone). And of course the bridge pickup sound crystal clear with great attack.

Input 2 is lower in volume and fits better with humbucker pickups

Input 1 is higher in volume and I believe fits better with single coil pickups.

But then again a humbucker guitar in input 1 with the volume below 10 sound great also.

The distortion comes naturally and is very smooth with great dynamics.

Very warm vintage sound and very loud for a 3W amp.

The best thing is that it amplifies you and your guitar.

With a bad player or a bad guitar (or both) it will sound bad,

but with a good guitar and a good player it will sound great. Nothing to hide here.

Yesterday a friend came by and he wanted to buy it!!! What else to say ? Great amp!!!