window.ga=window.ga||function(){(ga.q=ga.q||[]).push(arguments)};ga.l=+new Date; ga('create', 'UA-177780411-1', 'auto'); ga('set', 'forceSSL', true); ga('set', 'anonymizeIp', true); ga('require', 'displayfeatures'); ga('require', 'cleanUrlTracker'); ga('require', 'outboundLinkTracker'); ga('require', 'ec'); ga('send', 'pageview'); ga('set', 'nonInteraction', true); setTimeout("ga('send', 'event', 'read', '20 seconds')", 20000); Tolex Glue special glue for Tolex/Tweed coverings

Tolex Glue special glue for Tolex/Tweed coverings

GLUE GLUE Spezialleim für Tolex+Tweed / Tolex Glue
Please inform me as soon as the product is available again.

€24.99 *
Content: 700 Milliliter (€35.70 * / Liter)

*Prices incl. VAT plus shipping costs

Currently not available

  • GLUE
  • 1.88 kg
  • 4251594925286
  • ROHS COMPLIANT
  Tolex Glue / Special Glue for Tolex +Tweed ca. 700 g can  (larger containers... more
Product information "Tolex Glue special glue for Tolex/Tweed coverings"
 
Tolex Glue / Special Glue for Tolex +Tweed
ca. 700 g can  (larger containers available on request)
Description:
We recommend this glue to apply tolex or tweed cloth on wood surfaces. In general this glue can be used for PVC, VINYL, ABS, Polyamid, Polytherephtalatfoils, Celluloseester, PUR, Elastomere with each other or on wood, cloth or leather. Note: all surfaces must be dry and clean, free from oils and fat.
How to use:
Apply glue on both surfaces equally. With regular processing (>18° C) let dry 5 -10 Min. (finger test feels dry)
and press together. Hot processing with temperatures >+80° C is possible. In this case let dry completely (ca. 30min.), activate with heat and press together immediately. Hold pressure while cooling down. Final hardness is achieved after a few days.
This is a pressure sensitive adhesive and sufficient pressure must be applied to the entire surface.
 
Make sure both surfaces have a good coating of glue on them.  
 
Important note; Different woods will absorb some of the glue more than others, so a second light coat may be necessary.  
 
This is a pressure sensitive adhesive and sufficient pressure must be applied to the entire surface.  We use wood blocks with the corners radiused to apply pressure on the surfaces.  Applying heat with a heat gun or hair dyer is helpful, when applying tolex to inside radiuses.  Bottom line, there is a whole lot of rubbing and pressure that needs to be applied.
 
 
Usage: 150-250 g/m² (for both sides), depends on how absorptive ground is
Different woods will absorb some of the glue more than others, so a second light coat may be necessary.
 
 
IMPORTANT NOTE: for safe storage store at or above 3°C, protect from freezing.  
DO NOT order this item for shipping to locations if low temperature during transport or destination has to be expected.
Otherwise, order at your own risk.
Read, write and discuss reviews... more
Customer evaluation for "Tolex Glue special glue for Tolex/Tweed coverings"
Write an evaluation
Please verify your testimonial by clicking on the link sent to your email after submitting your text.

The fields marked with * are required.

Tube Amp Doctor GmbH
V-20550AL TAD Audio Cap 20uF @ 550V 25x50mm
TAD Audio Caps

From €9.20 *
Tube Amp Doctor GmbH
V-MC1 TAD 1nF 630VDC Mustard Cap  (1nF = 0.001uF)
TAD MUSTARD CAPS

From €1.20 *
Viewed