*Prices incl. VAT plus shipping costs
In Stock, delivery time approx.1-4 working days (Within Germany)
The delivery times for shipping abroad can be found here.
- Part Number: RT-12AX7
- Packaging Size: 2.5x2.5x8 cm
- Packaging Weight: 0.02 kg
- UPC: 4251594924234
-
Tube Type: | 12AX7/ECC83/7025 |
Socket: | 9 Pin(Noval) |
Selection: | Premium |
V2 in a Peavey 6505 212 combo (5150)
Peavey 6505 isn't famous for being silent, indeed it is also full of whistles.
With:
V1 RT-030
V2 RT-12AX7
V5 RT-030
(V3 Effect - V4 P.I.)
There are no hiss, no annoying background noise.
Perfect creamy gain sound.
Good 12AX7 for single channel and vintage amps! Great for hi-fi too
This tube has very defined, open and linear mids, and a bright top-end. The low end is not as good as other "standard" tubes like JJ or Tung sol, is very tight. The gain is more than enough for clean and crunch channels, maybe a tad bit low for high gain sounds. All in all, an excellent, very silent valve with a linear and open sound, suitable for hi-fi and single-channel or not excessively "gainy" amplifiers. The quality seems excellent, structurally it seems built in an almost identical way to the JJ ECC83S but I think it is made by Psvane. Compared to the latter Psvane 12AX7 valves for example, they are a definite step forward, however in my opinion they can do even better if they made this 12AX7 REDBASE with a slightly fuller sound in the low-mid bass and that little bit more gain. TAD's service is as always excellent!
I love that tube in Singleman line amps!
the REDBASE 12AX7/ECC83 is built very robustly and this gives it remarkable definition. The high range is bright but not glassy and the microphonics are very low, almost absent. The low range is tight and defined. Very good for preamps with distortion due to its non-ringing midrange. I love that tube in Singleman line amps!
Honestly I loved the RT001/RT010 for their mids and top.. on the gainy preamp worked awesome, on the Mercury head especially :-)
Hier finden sie die wichtigsten Informationen zum Matching unserer Röhren.
Wir bieten zwei unterschiedliche Matchings an. Diese unterscheiden sich wie folgt:
1. Unser Premium Matching:
Hierbei wird der Ruhestrom der Röhren punktgenau gematcht und auch die Steilheit (Transconductance) der Röhre gemessen.
2. Das sogenannte Standard Matching:
Die Röhren werden nur nach Ruhestrom selektiert, der maximale Unterschied darf max. 2,9mA betragen, eine Messung der Steilheit findet hier nicht statt.
Standard Matching, welche Optionen und Kriterien bietet das Standard Matching?
Das TAD Standard Matching beinhaltet ähnliche Qualitätsprüfungen wie beim TAD Premium Matching.
Die Röhren werden aber nur nach Ruhestrom selektiert, der maximale Unterschied darf max. 2,9mA betragen, eine Messung der Steilheit findet hier nicht statt.
Während der Ruhestromprüfung findet auch das Abhören auf Störgeräusche mit Klopftest statt.
Verhält sich die Röhre stabil und laufruhig, so wird entsprechend den Meßwerten, die TAD Grade Nummer ermittelt und direkt während der Prüfung etikettiert.
Diese Grade-Nummer kommt auch auf die Verpackung, so dass das Grading sowohl anhand der Röhrenschachtel als auch auf der Röhre selbst nachvollziehbar bleibt.
Matching- und Symmetrieoptionen für Vorstufenröhren
Paarweises Matching für Vorstufenröhren bedeutet, dass zwei geprüfte Röhren in einer realen Audioschaltung (Kathoden-Bias) die gleiche Verstärkung in jeder einzelnen Triode aufweisen, also vier charakteristisch identische Systeme.
Das Matching in Paare beinhaltet unsere Symmetrie- bzw. Balance-Selection (max. 10% Toleranz). Wir empfehlen das Paar-Matching für HiFi-Anlagen sowie bei allen Stereo-Anwendungen.