No results were found for the filter!
ENGL Output transformer for ENGL Blackmore Signature (E650) Original ENGL spare part
Remember
Part Number: EBMSA
ENGL Output transformer for ENGL Powerball (E645), Fireball (E635), Steve Morse Signature (E656) und Richie Blackmore Signature (E650) Original ENGL spare part
Remember
Part Number: EPBA
ENGL Output transformer for ENGL Savage 120 (E610) Original ENGL spare part comes with seperate PC Board like pictured
Remember
Part Number: ES120A
ENGL Output transformer for ENGL Screamer 50 (E330) also used in the Thunder series and Fireball 60 (E625) for 2x5881 (6L6GC), 50W 8/16 Ohm Original ENGL spare part
Remember
Part Number: ESC50A
Output transformer for: Leslie® 122/147, Class A Raa ca. 3.8k mounting on 2 13/16" x 2 1/4" (71.5mm x 57mm) primary: A1 Blue HT Red A2 Brown secondary: 0 Ohm white Center black 16 Ohm green
Remember
Part Number: 055103
Output transformer UPGRADE for: Soldano® Super Lead 60, 2x 5881/6L6, 4, 8, 16 Ohms wound according to the legendary Bassman OT 125A13A fits also old Peavey Classic 60 amps (replaces 70500207) and the Fender (EVH) output transforer...
Remember
Part Number: SL60A
Output transformer, HiFi, for Audiomat Prélude Référence for Dual EL34/Class A/Ultralinear, with tap for cathode feedback With solder lugs 4 and 8 Ohm Primary: A1 #2 SG1 #1 connect to #8 B+ #7 connect to #6 SG2 30% #5 connect to #12 A2...
Remember
Part Number: 14627-B
Output transformer, HiFi, for EL34/Class AB/Ultra linear, with screen taps at 30/43 and 50% With solder lugs Raa ca. 3.6 k Max 60W, 4 and 8 Ohm Lamination: EI96 Stack: 45,7mm Mounting on 80mm x 66mm this transformer is usually no stock...
Remember
Part Number: TFEL34HIFI
Output transformer, special item, 45W max., 2 Ohms, Rpp ca. 4.2k Lamination EI96/35 Mounting on 84mm x 59mm Impedance: RPP= 4.2k Ohms RDC plate-plate: 97 ohms For DIY Projects with 2x 6L6, power output 45W max. very close to the OT of a...
Remember
Part Number: TFS-0004
Top seller
Viewed