No results were found for the filter!
Mains transformer for: Fender® Tweed Bassman (5F6-A), Tweed Pro Amp (5E5-A), Tweed Bandmaster (5E7), Tweed Twin (5E8 "Low Power"), Super (5F4, 6G4, 6G4-A) Lamination 4 1/8" , Stacking 1 3/4" Mounting on 87.5mm x 70mm Dimension: L x W x...
Remember
Part Number: 8087
Power Transformer for the Fender® Tweed Champ 5E1, 5F1 and the TAD Amp KIT also used in the TAD Amp KIT 5F2 also perfect because of the lower B+ for Fender Champ and Vibro Champ ( all AA764 models) Mounting on 2 1/2" x 2" CUSTOM MADE FOR...
Remember
Part Number: 6500
Transf.MAINS for: Fender® Tweed Deluxe Amp (5E3 etc.) NEW VERSION: 2" STACK and C.T. on filament for low noise supports 6L6GC and GZ34/5AR4 tubes also! Lamination: 3 3/8" Mounting on 70 x 56mm, lay-down. height above chassis: 75mm W x D...
Remember
Part Number: 6452L
no longer available - until further notice Mains Transf. for Fender Twin Reverb II (Rivera) made from 1980 to 1985 Lamination 3 3/4", Stack 2 1/3" Mounting on Befestigung 79mm x 64mm Primary: 0V White 230V Black Secondary: 0 V Red 180 V...
Remember
Part Number: 021032
Mains Transf. for Fender Vibro Champ XD, Super Champ XD, Upgrade Primary: 230V Black 0V White Secondary: 285V@100mA Red 0V Red 16V@150mA Blue 0V Yellow 16,5V Blue 6,3V@1.3A Green 0V Green 9V@0.5A Brown 0V Brown
Remember
Part Number: 007-4596-000
no longer available. Replacement see transformer 005-1463-000 Mains Transformer, Export Version for Fender® Vibroking, Tonemaster, Dual Professional Models with voltage doubler on Bias see >>>047777 Primary: white thermal cutoff white...
Remember
Part Number: 026554
no longer available. Replacement see transformer 005-1463-000 Mains Transformer, Export Version for Fender® Vibroking, Tonemaster, Dual Professional, for units with voltage doubler on Biascircuit (easily identifiable by two Caps...
Remember
Part Number: 047777
Power transfomer for Fender® Vibrolux (AA763, AB763), Vibrolux Reverb (AA864, AA964, AB864, AB568, AA270), Tremolux, Vibroverb Mod.: 6G16 replaces 125P31A (022731 und 022723) - also fits Hammond M3 and M100. Perfect transfomer to mod the...
Remember
Part Number: 125P26A
mains transformer for Fender® 135W models: This 013830 mainstranformer is used for all 135 Watt Fender amps of the 1970s: Twin Reverb, Dual-Showman Reverb, Bassman 135, Quad Reverb and Vibrasonic Reverb. Check the power output marked at...
Remember
Part Number: 013830
MAINS transformer for: Fender® Blues Junior (220,230,240V), also for Blues Junior III Upgrade for Fender Pro Junior Amp (004-1783-000) Primary #70005 Thermal Breaker Pink Thermal Breaker Pink 0V Violet 220V White 230V Grey 240V Black...
Remember
Part Number: 004-9968-000
Mains transformer for Fender: DUAL BASS 400, replaces 002-7659-000 Primary: 0V WHITE 220V GREY 230V BLACK 240V BROWN Secondary: 43V YELLOW 0V GREEN 43V YELLOW 19V RED 0V ORANGE 19V RED picture shows similar product.
Remember
Part Number: 002-7659-000
until further notice undeliverable! Mains Transformer, Fender Studio Bass and Super Twin Reverb, 6x6L6 . max. 200W For 230V Operation: apply 230V to ORANGE and BLACK, interconnect BLUE and YELLOW. Primary: 0V ORANGE 115V BLUE 0V YELLOW...
Remember
Part Number: 012405
the 125P34AX (=022764) is the Export-Version and replaces the 110V US-Version 125P34A (=022756). CUSTOM MADE in U.S.A. These transformers are made in the USA. Quality, reliability, and excellence are what make our transformers the best...
Remember
Part Number: 125P34AX
Transf. Mains for Fender Champ 25 SE and Champ 25 Lamination: 3", Stack 2" Dimensions: L x W x H: 76mm x 64mm x 93mm Installation height: 80mm fits Laney AOR30 also! (increase R75 , R76, filament balance with 2x100R) Also perfect for DIY...
Remember
Part Number: 039044
Top seller
Viewed