No results were found for the filter!
500K Push/Pull DPDT Audio Pot, knurled shaft, 3/4" long threaded...
PUSH-PULL Guitar-pot, Split Shaft, 500K Audio Potentiometer 500K audio taper control pot with double pole/double throw (DPDT) push pull switch. Super quality, feel and reliability. 19mm Long shaft bushing for use in Les Pauls and other...
Remember
Part Number: Z-LP500K-PP
CTS 250k Dimple Vintage Audio Taper (LOG) Guitar Potentiometer,...
CTS 250k Ohm true Vintage Audio Taper (30% Log) 24mm Dimple Back Guitar-Potentiometer SOLID shaft, short 6.4mm bushing original Specs for Vintage Telecaster® Guitars
Remember
Part Number: CTS-D-A250K-S
CTS 250K Dimple Vintage Audio Taper (LOG) Guitar Potentiometer,...
CTS 250k Ohm true Vintage Audio Taper (30% Log) 24mm Dimple Back Guitar-Potentiometer split/knurled shaft, short 6.4mm bushing original Specs for Vintage Stratocaster® Guitars
Remember
Part Number: CTS-D-A250K-SK
CTS 250K NO LOAD Dimple Vintage Audio Taper (LOG) Guitar...
CTS 250k Ohm NO-LOAD true Vintage Audio Taper (30% Log) 24mm Dimple Back Guitar-Potentiometer NO-LOAD: allows more overtone harmonics! Much like the Fender "No Load" pot this No-Load pot acts as a true bypass when rotated between 9 and...
Remember
Part Number: CTS-D-A250K-NL
CTS 250K Vintage Audio Potentiometer, metric M8 thread, medium Shaft
CTS 500k Ohm true Vintage Audio Taper (30% Log) 24mm Guitar-Potentiometer split/knurled shaft, 18 teeth, medium 9.5mm bushing, M8.
Remember
Part Number: CTS-MD-A250K-MK
CTS 500K (LIN) Potentiometer, metric M8 thread, medium Shaft
CTS 500k Ohm (LIN) 24mm Guitar-Potentiometer split/knurled shaft, 18 teeth, medium 9.5mm bushing, M8.
Remember
Part Number: CTS-MD-B500K-MK
CTS 500K LIN Custom Dimple Back Potentiometer, medium Shaft
CTS 500k Ohm LIN, 24mm Dimple Back Guitar-Potentiometer split/knurled shaft, 3/8"thread, knurled 24 teeth Linear version : especially nuanced control behavior for clean and slightly crunched sounds
Remember
Part Number: CTS-D-B500K-MK
CTS 500K Vintage Audio Dimple Potentiometer, Long Shaft
CTS 500k Ohm true Vintage Audio Taper (30% Log) 24mm Dimple Back Guitar-Potentiometer split/knurled shaft, long 19mm bushing original Specs for Vintage Gibson Les Paul® guitars (check for actual bushing length required)
Remember
Part Number: CTS-D-A500K-LK
CTS 500K Vintage Audio Dimple Potentiometer, medium Shaft
CTS 500k Ohm true Vintage Audio Taper (30% Log) 24mm Dimple Back Guitar-Potentiometer split/knurled shaft, medium 9.5mm bushing original Specs for Gibson Les Paul® or PRS guitars (check for actual bushing length required)
Remember
Part Number: CTS-D-A500K-MK
CTS 500K Vintage Audio Potentiometer, metric M8 thread, medium Shaft
CTS 500k Ohm true Vintage Audio Taper (30% Log) 24mm Guitar-Potentiometer split/knurled shaft, 18 teeth, medium 9.5mm bushing, M8.
Remember
Part Number: CTS-MD-A500K-MK
CTS 250K DPDT Push-Pull Potentiometer
The best push-pull potentiometer ever made! These aren't your standard off the shelf CTS pots either. -Custom taper for a smoother volume or tone control -10% tolerance -Solid brass split shaft and bushing (3/8'' diameter x 3/8'' length)...
Remember
Part Number: CTS-PL-250KA-KN
CTS 500K DPDT Push-Pull Potentiometer
The best push-pull potentiometer ever made! These aren't your standard off the shelf CTS pots either. -Custom taper for a smoother volume or tone control -10% tolerance. -Solid brass split shaft and bushing (3/8'' diameter x 3/8''...
Remember
Part Number: CTS-PL-500KA-KN
CTS High Torque 250K Dimple Vintage Audio Taper (LOG) Guitar...
CTS 250k Ohm true Vintage Audio Taper (30% Log) 24mm Dimple Back Guitar-Potentiometer SOLID shaft bushing: short 6.4mm High Torque version original Specs for Vintage Telecaster® Guitars
Remember
Part Number: CTS-HTQ-A250K-S
CTS High Torque 250K Dimple Vintage Audio Taper (LOG) Guitar...
CTS 250k Ohm true Vintage Audio Taper (30% Log) 24mm Dimple Back Guitar-Potentiometer split/knurled shaft, short 6.4mm bushing, High Torque version original Specs for Vintage Stratocaster® Guitars
Remember
Part Number: CTS-HTQ-A250K-SK
CTS High Torque 500K Vintage Audio Dimple Potentiometer, Long Shaft
CTS 500k Ohm true Vintage Audio Taper (30% Log) 24mm Dimple Back Guitar-Potentiometer split/knurled shaft, long 19mm bushing, High Torque version original Specs for Vintage Gibson Les Paul® guitars (check for actual bushing length required)
Remember
Part Number: CTS-HTQ-A500K-LK
CTS High Torque 500K Vintage Audio Dimple Potentiometer, medium Shaft
CTS 500k Ohm true Vintage Audio Taper (30% Log) 24mm Dimple Back Guitar-Potentiometer split/knurled shaft, medium 9.5mm bushing, High Torque version original Specs for Gibson Les Paul® or PRS guitars (check for actual bushing length...
Remember
Part Number: CTS-HTQ-A500K-MK
CTS Long Shaft 500K DPDT Push-Pull Potentiometer
The best push-pull potentiometer ever made! These aren't your standard off the shelf CTS pots either. -Custom taper for a smoother volume or tone control -10% tolerance. -Correct size with solid brass split shaft and long bushing for...
Remember
Part Number: CTS-PL-500KA-LK
Guitar-Pot 500k Audio, 6mm/24 teeth knurled/Split-Shaft
Guitare-Potentiometer TAD/Alpha, 1piece 500k Audio / log, 6mm/24 teeth knurled/Split-Shaft with tinned back for traditionall solder style TAD/Alpha pots are custom made to accomplish perfect Volume/Tone control on vintage guitars: - 24...
Remember
Part Number: Z-A500K-KN
Guitar-Pot, 250K Audio / log, 6mm/24 teeth knurled/Split-Shaft
Guitare-Potentiometer TAD/Alpha, 1piece 250k Audio / log, 6mm/24 teeth knurled/Split-Shaft TAD/Alpha pots are custom made to accomplish perfect Volume/Tone control on vintage guitars: - 24 teeth knurled split-shaft 6mm diameter; fits...
Remember
Part Number: Z-A250K-KN
Guitar-pot, brass Split Shaft, 250K Audio Potentiometer, CTS
Pot for Guitar,250K-A (Audio), 1 pc., short brass split shaft. the original CTS. comes with nut, lock washer and washer like pictured special item!
Remember
Part Number: Z-A250K-BSK
Guitar-pot, Split Shaft, to use with Eric Clapton Strat (CTS/Fender)
Pot for Guitar,50K-A, Split Shaft, used as the Volume control in the active Guitar electronics of the Eric Clapton Strat (CTS, Fender)
Remember
Part Number: FPCV
Push-Push Pot 250k log/audio with DPDT switch
Push-Push Pot 250k log/audio with DPDT switch solder log terminals, knurled 24 teeth for US knobs, incl. nut + washer Thread with correct 3/8" Perfect for guitar mods ATTENTION: when removing the knob make sure the pot is in the...
Remember
Part Number: Z-PPA250K
Push-Push Pot 500k log/audio with DPDT switch
Push-Push Pot 500k log/audio with DPDT switch solder log terminals, knurled 24 teeth for US knobs, incl. nut + washer Thread with correct 3/8" Perfect for guitar mods or for PRS guitars for convenient single coil switching ATTENTION:...
Remember
Part Number: Z-PPA500K
Top seller
Viewed