wire & stranded wire

Close filters
  •  
 
from to

Cable

  •  
  •  
  •  
  •  
  •  
No results were found for the filter!
CB2020
42-Ga Plain Enamel Pickup Coil Wire 1/2 lb (USA)
AWG 42-Ga Plain Enamel Single build Pickup Coil Wire Pickup Coil Wire AWG 42 This is the highest quality pickup coil wire available. Perfect for repair and manufacturing. This is over 1/2 lb of vintage spec 42 ga. single build Plain...

€96.50 *
Part Number: CB2020
CB3020
Push-back-wire (solid): White, 1m
22awg, as used by Fender® and Gibson® solid core Material: tinned copper

€2.95 *
Part Number: CB3020
CB3025
Push-back-wire (solid): Black, 1m
22awg. as used by Fender® and Gibson® solid core Material: tinned copper

€2.95 *
Part Number: CB3025
CB3030
Push-back-wire (solid): brown, 1m
22awg. as used by Fender® solid core Material: tinned copper

€2.95 *
Part Number: CB3030
CB3032
Push-back-wire (solid): green, 1m
18awg. as used by Fender® as filament wiring solid core Material: tinned copper

€3.45 *
Part Number: CB3032
CB3035
Push-back-wire (solid): yellow, 1m
22awg. as used by Fender® solid core Material: tinned copper

€2.95 *
Part Number: CB3035
CB3040
Push-back-wire (solid): red, 1m
22awg. as used by Fender® solid core Material: tinned copper

€2.95 *
Part Number: CB3040
CB3045
Push-back-wire (solid): blue, 1m
22awg. as used by Fender® solid core Material: tinned copper

€2.95 *
Part Number: CB3045
CB3120
Push-back-wire (stranded): White, 1m
stranded wire, 18awg. , originally used for Speaker wiring in Fender® amplifiers and cabinets, white Material: tinned copper

€3.85 *
Part Number: CB3120
CB3125
Push-back-wire (stranded): Black, 1m
stranded wire, 18awg. , originally used for Speaker wiring in Fender® amplifiers and cabinets, black. Material: tinned copper

€3.85 *
Part Number: CB3125
CB3220
Push-back-wire (stranded): White, 1m
stranded wire, 22awg. , recommended for Guitar and Bass wiring in Fender® Guitars Material: tinned copper

€3.85 *
Part Number: CB3220
CB3225
Push-back-wire (stranded): Black, 1m
stranded wire, 22awg. , recommended for Guitar and Bass wiring in Fender® Guitars Material: tinned copper

€3.85 *
Part Number: CB3225
CB4010
Braided wire for reverb cables
Fender 60's 70's style , Gibson PAF Style wire, internal Amp wiring of vintage Gibson Amps, Hammond and many more price is per meter diameter 2.5mm

€5.59 *
Part Number: CB4010
CB4011
SOFT TINNED COPPER WIRE Ø 0,91mm / 33 A,
SOFT TINNED COPPER WIRE Ø 0,91mm / 33 A, DIAMETER : 0.91MM (20SWG) TOLERANCE : +/- 1% ELONGATION: 22% MINIMUM RESISTANCE : 26.81 OHMS/KM STANDARD RESISTANCE @ 20 DEG C. YIELD : 5.83KGS/1000M SURFACE FINISH: THE WIRE SHALL BE BRIGHT,...

€0.99 *
Part Number: CB4011
CB4050
TAD Instrument cable, classic black
super flexible but at same time a finely woven shield , diameter 6mm, price per meter

€1.49 *
Part Number: CB4050
CB4060
TAD Instrument cable, >Vintage Tweed
super flexible but at same time a finely woven shield , diameter 6mm, price per meter >Vintage Tweed

€2.19 *
Part Number: CB4060
CB4070
TAD Speaker Cable , 2x 1.5mm², d=7,2mm, black,...
TAD Speaker Cable >black Note: see discount for 100m (= 1 reel) !

From €1.99 *
Part Number: CB4070
Z-SLTA
Teflon wire, braided shield
perfect for High-End application, easy to use because of heat resistance. Wire with AWG21, isolated with Teflon-FEP, shielded, Teflon-FEP coated, white, temperature-resistant, heat-proof, flexible. Price is per meter! operating voltage...

€12.70 *
Part Number: Z-SLTA
Viewed