No results were found for the filter!

6 solder lugs, shorting, with black chrome nut and washer, insulated from chassis. Headphone Jack for the Marshall JMP-1
Remember
Part Number: CO1096

6 solder lugs, shorting, old version with black nut and washer, insulated from chassis. Headphone Jack for the Marshall JMP-1
Remember
Part Number: CO1096-A

Black Elephant Tolex was also used by Marshall® since the 1960s on custom colour amplifiers. This tolex is also used on our Marshall® style Plexi Cabinets. width: 127 cm Unit: price per meter!
Remember
Part Number: MTBE

Black Levant Tolex was also used by Marshall® since the 1960s on custom colour amplifiers. This tolex is also used on our Marshall® style Plexi Cabinets. width: 138 cm Unit: price per meter!
Remember
Part Number: MTB

primary used by Marshall ® , used since late 1980´s till today on most models (equals ME-FRETM0017) used for example on models JCM800 (z.B. 2203) , JCM900 (z.B. High Gain Dual Reverb), JCM2000 (DSL100 ) this is the orignal knitted fabric...
Remember
Part Number: MGCB-100

Black-on-Green Levant tolerx covering same as used on our Marshalll®/Plexi style Black-On-Green cabinets; Marshall ueed greenish black tolex during the 1960. width: 136 cm Unit: price per meter!
Remember
Part Number: MTGB

primary used by Marshall® JCM Series as standby switch
Remember
Part Number: MRSBL

DATA-Control of the Marshall® JMP1 Preamp
Remember
Part Number: MEPOTM00005

This basket weave quality originally has been made from same manufacturer in England as the regular Marshall thin black grill material (as used today) or the S&P used for the Marshall Plexi amps. Clearly deeper black, more solid and...
Remember
Part Number: MGCBB-100

IC CA3046 für JCM800 - 2205 + 2210
Remember
Part Number: MEICCA3046

NOS original Marshall impedance matching transformer, 782-200 Made in England Special item from old Marshall repair stock. 100W to 4, 8, 16 Ohms. Lamination 3.75", Stack 1" Mounting on 64mm x 42mm Limited Supply
Remember
Part Number: TFS-0017

Power Transformer Original Marshall 50W NOS, T3560, 110/120V Primary only, slotted lamination, paper wound, Low B+ unused original condition spare part. THE REAL DEAL... mainly seen in Canadian Marshall 50W Lead Amps (Model 1987) in the...
Remember
Part Number: M50PL-NOS

Power transformer for Marshall JTM45 Reissue (2245) and Bluesbreaker Reissue (1962) 117V and 230V/240V operation possible (see picture 4) lamination size like the original: 3 3/4", Stacking 60mm! Drop-in Replacement! Upgrade with vintage...
Remember
Part Number: MJTM45RP

lay-down power transformer for Marshall Models 1959, 1992, made from 1966-69 lamination: 4 1/2" x 3 3/4", Stack 1 3/4" Cutout needed : 83mm x 69mm Mounting on 95mm x 73mm Primary: 0V Orange 120V Red 220V Grey 230V Blue 240V Violet...
Remember
Part Number: M100PL

Like the M100PS but with additional 12V winding for modifications or relais switching upright version as used for JCM800 series Mod. 1959, 1992, 2203, 2210, 4103, 4211 since 1971 till 1989 replacement for Drake DET-4145G, (silver/zinc...
Remember
Part Number: M100PS-12

upright version as used for JCM800 series Mod. 1959, 1992, 2203, 2210, 4103, 4211 since 1971 till 1989 100W power transformer of the JMP Marshalls like Super Bass, Super Lead Mk II and Master Model 100W Lead Mk 2. also used in the auch...
Remember
Part Number: M100PS

Can be used with Rectifier tubes EZ81 (6.3V) and GZ34/5AR4 (5V). Vintage correct slotted lamination. Made in Europe to Dagnall specs. For 2x EL84 and up to 4x ECC83, lay-down type: Lamination 3,75" Perfect replacement/Upgrade for the...
Remember
Part Number: MJTM18WP

Power transformer for Marshall 4001 "Studio 15" "Little Fatty" 117V and 230V/240V operation possible (see picture 3) Lamination 3" UPGRADE with superior performance Primary: #70005 117V #7 0V #8 117V #11 0V #12 Secondary: 300V 100mA #16...
Remember
Part Number: M15PN

upright Mod. for Marshall® 50W Models from 1970-1989, JMP, JCM800 like Model 1986, 1987, 1987X, 2204, 2205, 4010, 4104, 4210, 4212 fits also 2550, 2554 etc. Replaces 1202-324 and 1202-164 along with the TXMA00004 mounting center: 79 x...
Remember
Part Number: M50PS

MAINS for: Marshall® 9005 rack Power Amp, Model MGP 9005, 50W + 50W Stereo valve power amplifier Lamination 4 1/2", Stack: 2 1/2" NEW VERSION: supports 6550 and KT88 also (check height!!!) primary 0V Orange 120V Grey 0V White 100V Blue...
Remember
Part Number: M9005P

Mains-Transformer for Marshall 100 W, JCM900, JCM2000, 2100, 2101, 4100, 4101, 6100, 6101, 9200, DSL100, TSL100, TSL122 Replacement for Dagnall D2105 and T-5826 (TXMA 00061) Also for Marshall JTM60 Primary: 0V / 115V / 230V Comes with...
Remember
Part Number: M100PN

until further notice undeliverable! Power transformer for Marshall JTM 100 Plexi lamiantion size: 4 1/2" , Stacking: giant 3" !!! 100W mains transformer for very early Marshalls with 540V of B+ Primary: 0 V White 110 V Red 200 V Black...
Remember
Part Number: MJTM100P

Power transformer for Marshall Major 200W, comes without shrouds Lamination size: 5 5/16", Giant Stacking: 3" Mounting on 112.5mm x 90mm primary: 245V violet 225V blue 200V brown 120V red 110V white 0V yellow secondary: 230V 1A red 0V...
Remember
Part Number: M200P

NO MORE IN PRODUCTION: SEE M50PL WHICH FEATURES VINTAGE CORRECT SIZES!!! Infos only for the sake of completeness: Maintransformer for: JTM45 Plexi Amp-Kit (till 2014) and other 50W tube amp projects with GZ34 tube rectifier support....
Remember
Part Number: MJTM45P
Top seller
Viewed