Impedance selector switch (used in TAD Plexi Kits)

Preview: SW1021 Impedanzwahlschalter (z.B. für TAD Plexi Amp Kits)

SW1021 Impedanzwahlschalter (z.B. für TAD Plexi Amp Kits)

€12.95 *

*Prices incl. VAT plus shipping costs

In Stock, delivery time approx.1-4 working days (Within Germany)
The delivery times for shipping abroad can be found here.

Part Number: SW1021
Packaging Size: 7x3.5x10 cm
Packaging Weight: 0.033 kg
UPC: 4251594918431

highest quality component and very powerful performance, rated 6A@125V, SPTT 1 pole, 3 positions... more

Close menu

Product information "Impedance selector switch (used in TAD Plexi Kits)"

highest quality component and very powerful performance, rated 6A@125V, SPTT 1 pole, 3 positions

Perfect replacement for old Marshall with a defective selector slot.

NOTE: we recommend to order a 2nd nut HR1021for proper mounting

Matching black anodized plate for direct mounting please look at item"BM-SW1-BLECH"

Resistive Load: 6A @ 125V AC, 3A @ 250V AC

Contact Resistance: 20 milliohms maximum

Insulation Resistance: 100 megohms minimum @ 500V DC

Dielectric Strength: 1,500V AC minimum

Electrical Life: 5,000 cycles

Indexing: 45°

Contact Timing: Nonshorting

Connection:	Solder lugs
Switch Type:	Impedance selector switch

Read, write and discuss reviews... more

Close menu

Customer evaluation for "Impedance selector switch (used in TAD Plexi Kits)"

Write an evaluation

Please verify your testimonial by clicking on the link sent to your email after submitting your text.

MSI Marshall Impedance Selector für Reissue Serie

Marshall Impedance Selector for Reissue Serie

€47.50 *

MSV Marshall Voltage Selector für Reissue Serie, alle Modelle

Marshall Voltage Selector for Reissue Series, all models

€38.90 *

BM-SW1-BLECH Alu-Blech 42x35, 2mm, ideal für alte Plexi und JMP Marshall bis Bj `79

Aluminum plate black anodized, 42x35mm, 2mm thick

€4.50 *

SW1020 Impedanzwahlschalter (z.B. für Plexi Amp Kits)

Impedance selector switch (used in TAD Plexi Kits)

€19.80 *

FKP Pointerknob (chicken head), black für Fender Amps

Pointerknob (chicken head), black for Fender Amps

€2.59 *

HR1021 Spezialmutter für Impedanzwahlschalter SW1021

Special nut for impedance selector switch SW1021

€0.95 *

Carbon Composition Resistor

From €0.73 *

V-MC1 TAD 1nF 630VDC Mustard Cap (1nF = 0.001uF)

TAD MUSTARD CAPS

From €1.20 *

Special nut for impedance selector switch SW1021

€0.95 *

TAD SILVER MICA CAPS

From €0.65 *

Aluminum plate black anodized, 42x35mm, 2mm thick

€4.50 *

mounting clamp Ø = 35 mm

€1.49 *

6L6GCM-STR REDBASE TAD PREMIUM Selected

From €36.80 *

Fuses

From €0.80 *

V-5050500R 50+50uF 500V Elektrolytkondensator, radial 35x75mm

50+50uF 500V electrolytic capacitor, radial 35x75mm

€9.65 *

MBBIEC Kaltgerätenetzeinbaubuchse, IEC, Snap-In, für alle Plexi Style Chassis

AC-Chassisjack IEC-style, for all Plexi Style chassic

€6.40 *

HR9250 Unterlegscheibe mit Zahnung und zwei Bohrungen

Terminal Solder Lockwasher Lugs

€0.50 *

CO1050 Klinkenbuchse 6,3 mm, mono, Lötösen, kurzschließen

1/4"Phone Jack, plastic with chrome nut, mono, shorting

€2.00 *

SW1070 Carling 1x AUS tropfenförmiger Metallhebel

Carling 110-63 SPST, 2 position toggle switch

€8.90 *

S8C-1 Oktalfassung, Keramik, Lötösen, einteilig mit Montageflansch

Octal socket, Ceramic, solder lugs, one-piece with fixed mounting...

€1.95 *

MK Marshall Style Knopf mit Schraube, schwarz +gold, für 6,3 Achse

Marshall Style Knob with screw, 6,3 mm Axis, Black with Gold cap

€2.59 *

V-50100 TAD Gold Cap 50uF @ 100V Elektrolytkondensator, axial

TAD Gold Cap 50uF @ 100V electrolytic capacitor

€1.75 *

S9SH-50-BT Abschirmhülse für Novalsockel, Belton, l=50mm

Belton Tube shield, for noval socket, l=50mm

€1.40 *

RV-4AB3C1B 4AB3C1B TAD Hallspirale 2x2 Federn

4AB3C1B TAD Reverb Can 2x2 Springs

€32.50 *

Pointerknob (chicken head), black for Fender Amps

€2.59 *

S9CSK-BT VT9-ST-C Belton Novalsockel, Lötösen für chassis mount

VT9-ST-C Belton Noval socket, solder lugs with skirt

€1.99 *

S9CS Novalfassung, Keramik, mit Kragen und Abschirmhülse

Noval socket, Ceramic, with skirt and shield

€1.59 *

FFH Sicherungshalter für Fender Amps1960er-1980er

Fuse-Holder (Fender style of 1960s - 80s)

€4.97 *

CO12A SWITCHCRAFT #12A Klinkenbuchse mono 6,3 mm, Metall

SWITCHCRAFT #12A 1/4" Mono Phone Jack

€3.61 *

V-2525 25uF @ 25V Elektrolytkondensator, axial, 105°C, 13mm x 6.5mm

25uF @ 25V axial capacitor, 105°C, 13mm x 6.5mm

€0.79 *

6V6GT-STR REDBASE TAD PREMIUM Matched

From €34.90 *

FPLA Lampenfassung für Fender Pilot Light

Lamp holder assembly for Fender Pilot Light Jewels

€7.50 *

125C1A Siebdrossel 4H, 90 Ohm, für Fender®, Boogie®

Choke 4H, 90 Ohm, for Fender®, Boogie®

€39.95 *

GZ34-STR TAD REDBASE PREMIUM SELECTED

From €36.50 *

ECC83-JJ TAD Premium Selected

From €29.80 *

HR3121 MUTTER mit Zahnscheibe für FCSC + HR3050 + HR3120

NUT: Kep Nut for Chassis Strap Bolt + Speaker Screw

€0.60 *

Push-back-wire (solid): yellow, 1m

€3.20 *

Push-back-wire (solid): green, 1m

€3.45 *

V-22500 Elko 22uF @ 500V axial, 16x32mm Elektrolytkondensator 105°C

22uF @ 500V 16x32mm axial capacitor 105°C

€2.89 *

V-22600 0,022uF 600V TAD/Sprague Orange Drop

TAD Sprague/Orange Drops (715 P)

From €1.29 *

CO11 SWITCHCRAFT #11 Klinkenbuchse 6,3mm ( 1/4") Metall, offen, mono

SWITCHCRAFT #11 1/4" (6,3mm) Metal Phone Jack, open, mono

€3.20 *

CTS-D-A1M CTS 1M LOG Custom Dimple Potentiometer, glatte 6.3mm Achse, 24mm

A1M LOG CTS Dimple Potentiometer

€6.95 *

1k / 5W Enamel Resistor

€2.50 *

V-16475 16uF @ 475V 12x30mm Elektrolytkondensator, axial, 105°C

16uF @ 475V 12x30mm electrolytic capacitor, axial, 105°C

€2.34 *

S8M-BT VT8-ST Belton Oktalfassung, Micalex, Lötösen, einteilig

VT8-ST Belton Octal socket, Micalex, solder lugs

€2.48 *

6L6WGC-STR REDBASE small bottle TAD PREMIUM Matched

From €39.80 *

Impedance selector switch (used in TAD Plexi Kits)

€19.80 *

Special nut for impedance selector switch SW1021

€0.95 *

Marshall Impedance Selector for Reissue Serie

€47.50 *

Aluminum plate black anodized, 42x35mm, 2mm thick

€4.50 *

Carbon Composition Resistor

From €0.73 *

voltage selector switch

€21.99 *

6L6GCM-STR REDBASE TAD PREMIUM Selected

From €36.80 *

TAD MUSTARD CAPS

From €1.20 *

Amp-Kit Plexi45

From €979.00 *

Amp-Kit Plexi 100 Lead

From €1,199.00 *

V-20550AL TAD Audio Cap 20uF @ 550V 25x50mm

TAD Audio Caps

From €9.20 *

Carling 110-63 SPST, 2 position toggle switch

€8.90 *

50+50uF 500V electrolytic capacitor, radial 35x75mm

€9.65 *

Power switch

€12.74 *

Amp-Chassis: JTM45 Style

€59.50 *

mounting clamp Ø = 35 mm

€1.49 *

TAD SILVER MICA CAPS

From €0.65 *

SW1003-M Netzschalter 2-fach-AUS, Metallhebel

Power switch, DPST, double ON/OFF, metal toggle

€12.50 *

SW1030 Impedanzwahlschalter (z.B. für Bogner, Friedman etc.)

Impedance selector switch (used by Rivera etc.)

€35.90 *

GZ34-STR TAD REDBASE PREMIUM SELECTED

From €36.50 *

1/4"Phone Jack, plastic with chrome nut, mono, shorting

€2.00 *

Choke 4H, 90 Ohm, for Fender®, Boogie®

€39.95 *

Belton Tube shield, for noval socket, l=50mm

€1.40 *

Marshall Style Knob with screw, 6,3 mm Axis, Black with Gold cap

€2.59 *

K-ACM100W Amp Chassis für 100 Watt Plexi Kit

Amp Chassis typical for 100 Watt Plexi Kit

€96.00 *

Marshall Voltage Selector for Reissue Series, all models

€38.90 *

6V6GT-STR REDBASE TAD PREMIUM Matched

From €34.90 *

22uF @ 500V 16x32mm axial capacitor 105°C

€2.89 *

6L6WGC-STR REDBASE small bottle TAD PREMIUM Matched

From €39.80 *

MSP Spannungs- und Impedanzwahlstecker mit Fenster

Impedence or Voltage Selector Plug with little window

€12.74 *

Pointerknob (chicken head), black for Fender Amps

€2.59 *

M50A Ausgangsübertrager für Marshall 50W, 2x EL34, 4+8+16 Ohm

Output transformer for Marshall 50W, 2x EL34, 4+8+16 Ohm

€168.80 *

BM-SW1 Drehschalter, z.B. für VOX® AC30 Vibrato/Tremolo

Rotary switch, as used in VOX® AC30 for Vibrato/Tremolo

€4.95 *

V-3232500R 32+32uF 500V Elektrolytkondensator, radial 35x50mm

32+32uF 500V electrolytic capacitor, radial 35x50mm

€9.60 *

AC-Chassisjack IEC-style, for all Plexi Style chassic

€6.40 *

NUT: Kep Nut for Chassis Strap Bolt + Speaker Screw

€0.60 *

TAD Sprague/Orange Drops (715 P)

From €1.29 *

ECC83-JJ TAD Premium Selected

From €29.80 *

M100A Ausgangsübertrager für Marshall 100W, ab Bj.''66 auch für JMP, JVM 800

Output transformer for Marshall 100W amps, used since 1966 for all...

€187.50 *

A1M LOG CTS Dimple Potentiometer

€6.95 *