Impedance selector switch (used in TAD Plexi Kits)

SW1020 Impedanzwahlschalter (z.B. für Plexi Amp Kits)

€19.80 *

This item is no longer available

Alternative

Impedance selector switch (used in TAD Plexi Kits)

€12.95 *

In Stock, delivery time approx.1-4 working days (Within Germany)
The delivery times for shipping abroad can be found here.

Part Number: SW1021

Part Number: SW1020
Packaging Size: 7x3.5x10 cm
Packaging Weight: 0.033 kg
UPC: 4251594915737

highest quality component and very dependable performance, rated 6A@125V, SPTT 1 pole, 3... more

Close menu

Product information "Impedance selector switch (used in TAD Plexi Kits)"

highest quality component and very dependable performance, rated 6A@125V, SPTT 1 pole, 3 positions

MADE in JAPAN.

Perfect replacement for old Marshall with a defective selector slot.

Matching black anodized plate for direct mounting please look at "matching products"

Resistive Load: 6A @ 125V AC, 3A @ 250V AC, or 5A @ 30V DC

Contact Resistance: 10 milliohms maximum

Insulation Resistance: 200 megohms minimum @ 500V DC

Dielectric Strength: 1,500V AC minimum

Mechanical Life: 15,000 operations minimum

Electrical Life: 7,500 operations minimum

Indexing: 45°

Contact Timing: Nonshorting

Range of Operating Torque: HS13: 1.5 ~ 2.4 kg-cm

Shaft: brass

Bushing: brass

Case: Phenolic resin

Movable Contacts: phosphor bronze

Stationary Contacts: brass with silver plating

Terminals: phosphor bronze

Operating Temp Range: -10°C through +70°C (+14°F through +158°F)

Humidity: 90 ~ 98% humidity for 96 hours @ 40°C (104°F)

Connection:	Solder lugs
Switch Type:	Impedance selector switch

Documents...

Available downloads:

Download SW1020_Dimensions

Safety information...

Responsible person for the EU

Economic operator established in the EU, who ensures that the product complies with the required regulations:

Warning:

Improper assembly, installation or use can lead to a loss of operational safety where the component is used, damage to the product, plus leading to an increased risk of serious or life-threatening injuries!

Read, write and discuss reviews... more

Close menu

Customer evaluation for "Impedance selector switch (used in TAD Plexi Kits)"

Write an evaluation

Please verify your testimonial by clicking on the link sent to your email after submitting your text.

MSI Marshall Impedance Selector für Reissue Serie

Marshall Impedance Selector for Reissue Serie

€47.50 *

MSV Marshall Voltage Selector für Reissue Serie, alle Modelle

Marshall Voltage Selector for Reissue Series, all models

€38.90 *

BM-SW1-BLECH Alu-Blech 42x35, 2mm, ideal für alte Plexi und JMP Marshall bis Bj `79

Aluminum plate black anodized, 42x35mm, 2mm thick

€4.50 *

FKP Pointerknob (chicken head), black für Fender Amps

Pointerknob (chicken head), black for Fender Amps

€2.59 *

mounting clamp Ø = 35 mm

€1.49 *

MK Marshall Style Knopf mit Schraube, schwarz +gold, für 6,3 Achse

Marshall Style Knob with screw, 6,3 mm Axis, Black with Gold cap

€2.59 *

V-8475 8uF @ 475V 13x25mm Elektrolytkondensator, axial, 105°C

8uF @ 475V 13x25mm electrolytic capacitor, axial, 105°C

€2.18 *

K-ACM100FP Plexi Front-Panel für 100 Watt / JTM45 Kits

Plexi Front-Panel fits on 100 Watt Kits

€24.80 *

Aluminum plate black anodized, 42x35mm, 2mm thick

€4.50 *

A1M LOG ALPHA Pot

€2.75 *

HR9250 Unterlegscheibe mit Zahnung und zwei Bohrungen

Terminal Solder Lockwasher Lugs

€0.50 *

CO1050 Klinkenbuchse 6,3 mm, mono, Lötösen, kurzschließen

1/4"Phone Jack, plastic with chrome nut, mono, shorting

€2.00 *

B250k LIN ALPHA Pots

€2.75 *

V-2525BP 25uF @ 25V 10x19mm BIPOLAR Elektrolytkondensator,

25uF @ 25V 10x19mm BIPOLAR axial capacitor

€1.69 *

SW1003-M Netzschalter 2-fach-AUS, Metallhebel

Power switch, DPST, double ON/OFF, metal toggle

€12.50 *

MBBIEC Kaltgerätenetzeinbaubuchse, IEC, Snap-In, für alle Plexi Style Chassis

AC-Chassisjack IEC-style, for all Plexi Style chassic

€6.40 *

B25k LIN ALPHA Pots

€2.75 *

V-5050500R 50+50uF 500V Elektrolytkondensator, radial 35x75mm

50+50uF 500V electrolytic capacitor, radial 35x75mm

€9.65 *

V-3232500R 32+32uF 500V Elektrolytkondensator, radial 35x50mm

32+32uF 500V electrolytic capacitor, radial 35x50mm

€9.60 *

V-22500 Elko 22uF @ 500V axial, 16x32mm Elektrolytkondensator 105°C

22uF @ 500V 16x32mm axial capacitor 105°C

€2.89 *

HR9012 Gummitülle, Kabeldurchführung z.B. für TAD Chassis

Rubber grommet for TAD Chassis, 12mm

€0.80 *

FPLA Lampenfassung für Fender Pilot Light

Lamp holder assembly for Fender Pilot Light Jewels

€7.50 *

Pointerknob (chicken head), black for Fender Amps

€2.59 *

FFH Sicherungshalter für Fender Amps1960er-1980er

Fuse-Holder (Fender style of 1960s - 80s)

€4.97 *

A500k LOG ALPHA Pot

€2.75 *

V-25025BP 250uF @ 25V 16x27mm BIPOLAR Elektrolytkondensator

250uF @ 25V 16x27mm BIPOLAR axial capacitor, 105°

€2.59 *

S9CS Novalfassung, Keramik, mit Kragen und Abschirmhülse

Noval socket, Ceramic, with skirt and shield

€1.59 *

PLEXI-Amp Red Pilot light

€13.99 *

Amp-Chassis: JTM45 Style

€59.50 *

HR3131 MUTTER mit Zahnscheibe für HR3130+HR3060

NUT: Kep Nut for Screws HR3130+HR3060

€0.60 *

HR3130 SCHRAUBE für Oktalfassungen, Boards, Kondensatorschellen, passend zu Mutter HR3131

SCREW for 8-pin sockets, fiberboards, cap clamps, fits to nut HR3131

€0.40 *

CO12A SWITCHCRAFT #12A Klinkenbuchse mono 6,3 mm, Metall

SWITCHCRAFT #12A 1/4" Mono Phone Jack

€3.80 *

Push-back-wire (solid): yellow, 1m

€3.20 *

Push-back-wire (solid): green, 1m

€3.45 *

V-50100 TAD Gold Cap 50uF @ 100V Elektrolytkondensator, axial

TAD Gold Cap 50uF @ 100V electrolytic capacitor

€1.75 *

Z-KBA Aluminiumfolie, selbstklebend zur Abschirmung, 100

Aluminum foil, self-adhesive, 100mm width

€1.95 *

B1k LIN ALPHA Pots

€2.75 *

V-47500 TAD Gold Cap 47uF @ 500V Elektrolytkondensator, axial

TAD Gold Cap 47uF @ 500V electrolytic capacitor

€5.90 *

TURRET-S3.50 Turrets, runde + geschlitzte Form, 50 Stück Packung

Turret, round slotted version, 50pc package

€9.95 *

SW1050 Carling 316-PP 2x UM Fußschalter, Löstösen

Carling 316-PP DPDT push switch, solder lugs terminals

€17.95 *

S9C Novalfassung, Keramik, Löstösen, mit Montagering

Noval socket, Ceramic, with mounting bracket

€1.49 *

MJTM18WP Netztrafo für Marshall 18W Plexi / TAD Amp-Kit

Mains transf. for Marshall 18W Plexi / TAD Amp-Kit

€149.50 *

M50PL Netztrafo für Marshall JTM45 und 50W Plexi Modelle, TAD KIT PLEXI 45

Mains transf. for Marshall JTM45 and 50W Plexi, TAD KIT PLEXI 45

€179.50 *

K-ACM18W Amp Chassis für 18 Watt Plexi Kit

Amp Chassis for 18 Watt Plexi Kit

€59.50 *

SW1021 Impedanzwahlschalter (z.B. für TAD Plexi Amp Kits)

Impedance selector switch (used in TAD Plexi Kits)

€12.95 *

Marshall Impedance Selector for Reissue Serie

€47.50 *

Aluminum plate black anodized, 42x35mm, 2mm thick

€4.50 *

voltage selector switch

€21.99 *

MSP Spannungs- und Impedanzwahlstecker mit Fenster

Impedence or Voltage Selector Plug with little window

€12.74 *

SW1070 Carling 1x AUS tropfenförmiger Metallhebel

Carling 110-63 SPST, 2 position toggle switch

€8.90 *

Marshall Voltage Selector for Reissue Series, all models

€38.90 *

Power switch, DPST, double ON/OFF, metal toggle

€12.50 *

Amp-Chassis: JTM45 Style

€59.50 *

1/4"Phone Jack, plastic with chrome nut, mono, shorting

€2.00 *

125C1A Siebdrossel 4H, 90 Ohm, für Fender®, Boogie®

Choke 4H, 90 Ohm, for Fender®, Boogie®

€39.95 *

BM-SW1 Drehschalter, z.B. für VOX® AC30 Vibrato/Tremolo

Rotary switch, as used in VOX® AC30 for Vibrato/Tremolo

€4.95 *

HR1021 Spezialmutter für Impedanzwahlschalter SW1021

Special nut for impedance selector switch SW1021

€0.95 *

AC-Chassisjack IEC-style, for all Plexi Style chassic

€6.40 *

Pointerknob (chicken head), black for Fender Amps

€2.59 *

SW1075 Carling #112-63 1x UM / SPDT, ''Ground Switch'' in vintage Fender Amps

Carling #112-63 SPDT, toggle, 'Ground Switch' in vintage Fender Amps

€12.50 *

Marshall Style Knob with screw, 6,3 mm Axis, Black with Gold cap

€2.59 *

Plexi Front-Panel fits on 100 Watt Kits

€24.80 *

mounting clamp Ø = 35 mm

€1.49 *

SW1072 Carling 2BK62-63 2xAUS, 3A/250V (Mains) tropfenförmiger Metallhebel

Carling 2BK62-63 DPST, 3A/250V toggle switch

€9.90 *

voltage selector switch

€17.01 *

50+50uF 500V electrolytic capacitor, radial 35x75mm

€9.65 *

M50A Ausgangsübertrager für Marshall 50W, 2x EL34, 4+8+16 Ohm

Output transformer for Marshall 50W, 2x EL34, 4+8+16 Ohm

€168.80 *

22uF @ 500V 16x32mm axial capacitor 105°C

€2.89 *

MBBREP IEC-Kaltgerätenetzeinbaubuchse mit Einbaumaßen der Bulgin "Pig-Nose" Buchsen

AC-Chassisjack IEC-style with mounting specs of the orig. Bulgin...

€6.40 *

32+32uF 500V electrolytic capacitor, radial 35x50mm

€9.60 *

Z-SLTA Temperaturbeständige Teflon Leitung, geflochtene Abschirmung

Teflon wire, braided shield

€15.51 *

A1M LOG ALPHA Pot

€2.75 *

Power switch

€12.74 *

S9CSK-BT VT9-ST-C Belton Novalsockel, Lötösen für chassis mount

VT9-ST-C Belton Noval socket, solder lugs with skirt

€1.99 *

Fuse-Holder (Fender style of 1960s - 80s)

€4.97 *

CB3125 Push-back-wire (stranded): Schwarz, 1m

Push-back-wire (stranded): Black, 1m

€3.86 *

MJTM18WA Ausgangsübertrage für 18W Plexi Kit

Output transf. for 18W Plexi Kit

€111.90 *

HR9290 Käfigmutter für TAD Chassis (Plexi Kit) oder Marshall© JPM, JCM Chassis

€0.90 *

250uF @ 25V 16x27mm BIPOLAR axial capacitor, 105°

€2.59 *

M100D Siebdrossel f. Marshall 50W und 100W, z.B für 2203

Choke for Marshall 100W / 50W, for 2203, 2204, 220

€55.00 *

SW1013 Netzschalter, 2-fach-UM, Metallhebel, EIN-EIN-EIN,

Power switch, double ON/ON/ON, metal toggle for Or

€23.21 *

SW1007-M Kippschalter / Netzschalter, Groundschalter 2-fach

Toggle / Power switch, Ground switch, double ON/OFF

€16.56 *

Voltage selector plate (red)

€19.90 *

CB4011 Schaltdraht, Kupferdraht verzinnt Ø 0,91mm / 33 A,

SOFT TINNED COPPER WIRE Ø 0,91mm / 33 A,

€1.30 *