C3M Rev.Log CTS Dimple Potentiometer, solid shaft
*Prices incl. VAT plus shipping costs
In Stock, delivery time approx.1-4 working days (Within Germany)
The delivery times for shipping abroad can be found here.
- Part Number: CTS-D-C3M
- Packaging Size: 2.5x2.5x3 cm
- Packaging Weight: 0.01 kg
- UPC: 4251594917359
-
| Track Taper: | Reversed-Log |
| Connection Type: | Soldering Lug |
| Poti Value: | 3M Ω |
| Poti-Special: | Dimple Back |
The TAD Custom Series from CTS combines the highest quality details from over 70 years of experience at CTS.
CTS is an old fashioned US American supplier, seated in Illinois. Known for the finest potentiometers used in electric guitars since the 1950s.
Features and characteristics
This is a custom 30% logarithmic taper used especially in guitars and audio circuits. It allows a much better control over the whole rotation of the volume or tone control than with normal taper of regular industry standard logarithmic potentiometers. Since this is so special it needs to be custom made and was to often ignored by lower cost guitar and amplifier designs. We recommend to improve your equipment by switching to CTS Vitnage Audio Taper potentiometers in the TAD custom design for best control, dependability and natural performance.
The HTQ series has a higher torque than our regular CTS guitar potentiometers, they are therefore somewhat less easy-running and offer added grip when rolling the pot.
- 1/4" solid brass shaft
- 3/8" brass bushing
- 24mm "dimple" dished back cover
- including nut + washer + lock washer
- solder lug terminals for tradidional wiring
- Robust "dimple" Construction
- special low torque for smooth control
- Proprietary Anti-Static Lube
- Brass Shaft & Bushing
- Reduced Shaft Wobble
- pre-soldered rear cover for easy soldering
- Low Noise Output
Super-Pot: aged real vintage pots often show a slightly increased resistance supporting a more vivid and crisp tone. TAD Custom Guitar-Potentiometer have a built-in slightly higher value to provide exactly this characteristic of a dignifiedly aged true vintage pot.
- 1/4" KNURLED fine 24 teeth brass shaft
- brass bushing as used with vintage Gibson Les Paul® guitars as Volume+Tone control
- 24mm "dimple" dished back cover
- including nut + washer + lock washer
- solder lug terminals for tradidional wiring
- Robust "dimple" Construction
- special low torque for smooth control (except HTQ series)
- Proprietary Anti-Static Lube
- Brass Shaft & Bushing
- Reduced Shaft Wobble
- pre-soldered rear cover for easy soldering
- Low Noise Output
